DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* bpf-dis.c - BPF disassembler.
|
|
|
|
|
Copyright (C) 2023 Free Software Foundation, Inc.
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
Contributed by Oracle Inc.
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
This file is part of the GNU binutils.
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
This is free software; you can redistribute them and/or modify them
|
|
|
|
|
under the terms of the GNU General Public License as published by
|
2019-05-23 19:04:36 +02:00
|
|
|
the Free Software Foundation; either version 3, or (at your option)
|
|
|
|
|
any later version.
|
|
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
This program is distributed in the hope that it will be useful, but
|
|
|
|
|
WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
|
General Public License for more details.
|
2019-05-23 19:04:36 +02:00
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
along with this program; see the file COPYING3. If not,
|
|
|
|
|
see <http://www.gnu.org/licenses/>. */
|
2019-05-23 19:04:36 +02:00
|
|
|
|
|
|
|
|
#include "sysdep.h"
|
|
|
|
|
#include "disassemble.h"
|
|
|
|
|
#include "libiberty.h"
|
|
|
|
|
#include "opintl.h"
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
#include "opcode/bpf.h"
|
2023-07-30 22:39:30 +02:00
|
|
|
#include "elf-bfd.h"
|
|
|
|
|
#include "elf/bpf.h"
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
#include <string.h>
|
|
|
|
|
#include <inttypes.h>
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* This disassembler supports two different syntaxes for BPF assembly.
|
|
|
|
|
One is called "normal" and has the typical form for assembly
|
|
|
|
|
languages, with mnemonics and the like. The othe is called
|
|
|
|
|
"pseudoc" and looks like C. */
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
enum bpf_dialect
|
2019-05-23 19:04:36 +02:00
|
|
|
{
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
BPF_DIALECT_NORMAL,
|
|
|
|
|
BPF_DIALECT_PSEUDOC
|
|
|
|
|
};
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* Global configuration for the disassembler. */
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
static enum bpf_dialect asm_dialect = BPF_DIALECT_NORMAL;
|
2023-07-30 22:39:30 +02:00
|
|
|
static int asm_bpf_version = -1;
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
static int asm_obase = 10;
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* Print BPF specific command-line options. */
|
2019-05-23 19:04:36 +02:00
|
|
|
|
|
|
|
|
void
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
print_bpf_disassembler_options (FILE *stream)
|
2019-05-23 19:04:36 +02:00
|
|
|
{
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
fprintf (stream, _("\n\
|
|
|
|
|
The following BPF specific disassembler options are supported for use\n\
|
|
|
|
|
with the -M switch (multiple options should be separated by commas):\n"));
|
|
|
|
|
fprintf (stream, "\n");
|
|
|
|
|
fprintf (stream, _("\
|
|
|
|
|
pseudoc Use pseudo-c syntax.\n\
|
|
|
|
|
v1,v2,v3,v4,xbpf Version of the BPF ISA to use.\n\
|
|
|
|
|
hex,oct,dec Output numerical base for immediates.\n"));
|
2019-05-23 19:04:36 +02:00
|
|
|
}
|
|
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* Parse BPF specific command-line options. */
|
2019-05-23 19:04:36 +02:00
|
|
|
|
|
|
|
|
static void
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
parse_bpf_dis_option (const char *option)
|
2019-05-23 19:04:36 +02:00
|
|
|
{
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
if (strcmp (option, "pseudoc") == 0)
|
|
|
|
|
asm_dialect = BPF_DIALECT_PSEUDOC;
|
|
|
|
|
else if (strcmp (option, "v1") == 0)
|
|
|
|
|
asm_bpf_version = BPF_V1;
|
|
|
|
|
else if (strcmp (option, "v2") == 0)
|
|
|
|
|
asm_bpf_version = BPF_V2;
|
|
|
|
|
else if (strcmp (option, "v3") == 0)
|
|
|
|
|
asm_bpf_version = BPF_V3;
|
|
|
|
|
else if (strcmp (option, "v4") == 0)
|
|
|
|
|
asm_bpf_version = BPF_V4;
|
|
|
|
|
else if (strcmp (option, "xbpf") == 0)
|
|
|
|
|
asm_bpf_version = BPF_XBPF;
|
|
|
|
|
else if (strcmp (option, "hex") == 0)
|
|
|
|
|
asm_obase = 16;
|
|
|
|
|
else if (strcmp (option, "oct") == 0)
|
|
|
|
|
asm_obase = 8;
|
|
|
|
|
else if (strcmp (option, "dec") == 0)
|
|
|
|
|
asm_obase = 10;
|
2019-05-23 19:04:36 +02:00
|
|
|
else
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* xgettext:c-format */
|
|
|
|
|
opcodes_error_handler (_("unrecognized disassembler option: %s"), option);
|
2019-05-23 19:04:36 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
parse_bpf_dis_options (const char *opts_in)
|
2019-05-23 19:04:36 +02:00
|
|
|
{
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
char *opts = xstrdup (opts_in), *opt = opts, *opt_end = opts;
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
for ( ; opt_end != NULL; opt = opt_end + 1)
|
|
|
|
|
{
|
|
|
|
|
if ((opt_end = strchr (opt, ',')) != NULL)
|
|
|
|
|
*opt_end = 0;
|
|
|
|
|
parse_bpf_dis_option (opt);
|
|
|
|
|
}
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
free (opts);
|
2019-05-23 19:04:36 +02:00
|
|
|
}
|
|
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* Auxiliary function used in print_insn_bpf below. */
|
2019-05-23 19:04:36 +02:00
|
|
|
|
|
|
|
|
static void
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
print_register (disassemble_info *info,
|
|
|
|
|
const char *tag, uint8_t regno)
|
2019-05-23 19:04:36 +02:00
|
|
|
{
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
const char *fmt
|
|
|
|
|
= (asm_dialect == BPF_DIALECT_NORMAL
|
|
|
|
|
? "%%r%d"
|
|
|
|
|
: ((*(tag + 2) == 'w')
|
|
|
|
|
? "w%d"
|
|
|
|
|
: "r%d"));
|
|
|
|
|
|
|
|
|
|
(*info->fprintf_styled_func) (info->stream, dis_style_register, fmt, regno);
|
2019-05-23 19:04:36 +02:00
|
|
|
}
|
|
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* Main entry point.
|
|
|
|
|
Print one instruction from PC on INFO->STREAM.
|
|
|
|
|
Return the size of the instruction (in bytes). */
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
int
|
|
|
|
|
print_insn_bpf (bfd_vma pc, disassemble_info *info)
|
2019-05-23 19:04:36 +02:00
|
|
|
{
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
int insn_size = 8, status;
|
|
|
|
|
bfd_byte insn_bytes[16];
|
|
|
|
|
bpf_insn_word word = 0;
|
|
|
|
|
const struct bpf_opcode *insn = NULL;
|
|
|
|
|
enum bpf_endian endian = (info->endian == BFD_ENDIAN_LITTLE
|
|
|
|
|
? BPF_ENDIAN_LITTLE : BPF_ENDIAN_BIG);
|
|
|
|
|
|
|
|
|
|
/* Handle bpf-specific command-line options. */
|
|
|
|
|
if (info->disassembler_options != NULL)
|
2019-05-23 19:04:36 +02:00
|
|
|
{
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
parse_bpf_dis_options (info->disassembler_options);
|
|
|
|
|
/* Avoid repeteadly parsing the options. */
|
|
|
|
|
info->disassembler_options = NULL;
|
2019-05-23 19:04:36 +02:00
|
|
|
}
|
|
|
|
|
|
2023-07-30 22:39:30 +02:00
|
|
|
/* Determine what version of the BPF ISA to use when disassembling.
|
|
|
|
|
If the user didn't explicitly specify an ISA version, then derive
|
|
|
|
|
it from the CPU Version flag in the ELF header. A CPU version of
|
|
|
|
|
0 in the header means "latest version". */
|
2023-07-31 15:44:36 +02:00
|
|
|
if (asm_bpf_version == -1 && info->section && info->section->owner)
|
2023-07-30 22:39:30 +02:00
|
|
|
{
|
|
|
|
|
struct bfd *abfd = info->section->owner;
|
|
|
|
|
Elf_Internal_Ehdr *header = elf_elfheader (abfd);
|
|
|
|
|
int cpu_version = header->e_flags & EF_BPF_CPUVER;
|
|
|
|
|
|
|
|
|
|
switch (cpu_version)
|
|
|
|
|
{
|
|
|
|
|
case 0: asm_bpf_version = BPF_V4; break;
|
|
|
|
|
case 1: asm_bpf_version = BPF_V1; break;
|
|
|
|
|
case 2: asm_bpf_version = BPF_V2; break;
|
|
|
|
|
case 3: asm_bpf_version = BPF_V3; break;
|
|
|
|
|
case 4: asm_bpf_version = BPF_V4; break;
|
|
|
|
|
case 0xf: asm_bpf_version = BPF_XBPF; break;
|
|
|
|
|
default:
|
|
|
|
|
/* xgettext:c-format */
|
|
|
|
|
opcodes_error_handler (_("unknown BPF CPU version %u\n"),
|
|
|
|
|
cpu_version);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* Print eight bytes per line. */
|
|
|
|
|
info->bytes_per_chunk = 1;
|
|
|
|
|
info->bytes_per_line = 8;
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* Read an instruction word. */
|
|
|
|
|
status = (*info->read_memory_func) (pc, insn_bytes, 8, info);
|
2019-05-23 19:04:36 +02:00
|
|
|
if (status != 0)
|
|
|
|
|
{
|
|
|
|
|
(*info->memory_error_func) (status, pc, info);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
word = (bpf_insn_word) bfd_getb64 (insn_bytes);
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* Try to match an instruction with it. */
|
|
|
|
|
insn = bpf_match_insn (word, endian, asm_bpf_version);
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* Print it out. */
|
|
|
|
|
if (insn)
|
2019-05-23 19:04:36 +02:00
|
|
|
{
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
const char *insn_tmpl
|
|
|
|
|
= asm_dialect == BPF_DIALECT_NORMAL ? insn->normal : insn->pseudoc;
|
|
|
|
|
const char *p = insn_tmpl;
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
/* Print the template contents completed with the instruction
|
|
|
|
|
operands. */
|
|
|
|
|
for (p = insn_tmpl; *p != '\0';)
|
|
|
|
|
{
|
|
|
|
|
switch (*p)
|
|
|
|
|
{
|
|
|
|
|
case ' ':
|
|
|
|
|
/* Single space prints to nothing. */
|
|
|
|
|
p += 1;
|
|
|
|
|
break;
|
|
|
|
|
case '%':
|
|
|
|
|
if (*(p + 1) == '%')
|
|
|
|
|
{
|
|
|
|
|
(*info->fprintf_styled_func) (info->stream, dis_style_text, "%%");
|
|
|
|
|
p += 2;
|
|
|
|
|
}
|
|
|
|
|
else if (*(p + 1) == 'w' || *(p + 1) == 'W')
|
|
|
|
|
{
|
|
|
|
|
/* %W prints to a single space. */
|
|
|
|
|
(*info->fprintf_styled_func) (info->stream, dis_style_text, " ");
|
|
|
|
|
p += 2;
|
|
|
|
|
}
|
|
|
|
|
else if (strncmp (p, "%dr", 3) == 0)
|
|
|
|
|
{
|
|
|
|
|
print_register (info, p, bpf_extract_dst (word, endian));
|
|
|
|
|
p += 3;
|
|
|
|
|
}
|
|
|
|
|
else if (strncmp (p, "%sr", 3) == 0)
|
|
|
|
|
{
|
|
|
|
|
print_register (info, p, bpf_extract_src (word, endian));
|
|
|
|
|
p += 3;
|
|
|
|
|
}
|
|
|
|
|
else if (strncmp (p, "%dw", 3) == 0)
|
|
|
|
|
{
|
|
|
|
|
print_register (info, p, bpf_extract_dst (word, endian));
|
|
|
|
|
p += 3;
|
|
|
|
|
}
|
|
|
|
|
else if (strncmp (p, "%sw", 3) == 0)
|
|
|
|
|
{
|
|
|
|
|
print_register (info, p, bpf_extract_src (word, endian));
|
|
|
|
|
p += 3;
|
|
|
|
|
}
|
|
|
|
|
else if (strncmp (p, "%i32", 4) == 0
|
|
|
|
|
|| strncmp (p, "%d32", 4) == 0
|
|
|
|
|
|| strncmp (p, "%I32", 4) == 0)
|
|
|
|
|
{
|
|
|
|
|
int32_t imm32 = bpf_extract_imm32 (word, endian);
|
|
|
|
|
|
|
|
|
|
if (p[1] == 'I')
|
|
|
|
|
(*info->fprintf_styled_func) (info->stream, dis_style_immediate,
|
|
|
|
|
"%s",
|
2023-07-21 11:41:43 -07:00
|
|
|
asm_obase != 10 || imm32 >= 0 ? "+" : "");
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
(*info->fprintf_styled_func) (info->stream, dis_style_immediate,
|
|
|
|
|
asm_obase == 10 ? "%" PRIi32
|
|
|
|
|
: asm_obase == 8 ? "%" PRIo32
|
|
|
|
|
: "0x%" PRIx32,
|
|
|
|
|
imm32);
|
|
|
|
|
p += 4;
|
|
|
|
|
}
|
|
|
|
|
else if (strncmp (p, "%o16", 4) == 0
|
|
|
|
|
|| strncmp (p, "%d16", 4) == 0)
|
|
|
|
|
{
|
|
|
|
|
int16_t offset16 = bpf_extract_offset16 (word, endian);
|
|
|
|
|
|
|
|
|
|
if (p[1] == 'o')
|
|
|
|
|
(*info->fprintf_styled_func) (info->stream, dis_style_immediate,
|
|
|
|
|
"%s",
|
2023-07-21 11:41:43 -07:00
|
|
|
asm_obase != 10 || offset16 >= 0 ? "+" : "");
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
if (asm_obase == 16 || asm_obase == 8)
|
|
|
|
|
(*info->fprintf_styled_func) (info->stream, dis_style_immediate,
|
|
|
|
|
asm_obase == 8 ? "0%" PRIo16 : "0x%" PRIx16,
|
|
|
|
|
(uint16_t) offset16);
|
|
|
|
|
else
|
|
|
|
|
(*info->fprintf_styled_func) (info->stream, dis_style_immediate,
|
|
|
|
|
"%" PRIi16, offset16);
|
|
|
|
|
p += 4;
|
|
|
|
|
}
|
|
|
|
|
else if (strncmp (p, "%i64", 4) == 0)
|
|
|
|
|
{
|
|
|
|
|
bpf_insn_word word2 = 0;
|
|
|
|
|
|
|
|
|
|
status = (*info->read_memory_func) (pc + 8, insn_bytes + 8,
|
|
|
|
|
8, info);
|
|
|
|
|
if (status != 0)
|
|
|
|
|
{
|
|
|
|
|
(*info->memory_error_func) (status, pc + 8, info);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
word2 = (bpf_insn_word) bfd_getb64 (insn_bytes + 8);
|
|
|
|
|
|
|
|
|
|
(*info->fprintf_styled_func) (info->stream, dis_style_immediate,
|
|
|
|
|
asm_obase == 10 ? "%" PRIi64
|
|
|
|
|
: asm_obase == 8 ? "0%" PRIo64
|
|
|
|
|
: "0x%" PRIx64,
|
|
|
|
|
bpf_extract_imm64 (word, word2, endian));
|
|
|
|
|
insn_size = 16;
|
|
|
|
|
p += 4;
|
|
|
|
|
}
|
|
|
|
|
else
|
|
|
|
|
{
|
|
|
|
|
/* xgettext:c-format */
|
|
|
|
|
opcodes_error_handler (_("# internal error, unknown tag in opcode template (%s)"),
|
|
|
|
|
insn_tmpl);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
/* Any other character is printed literally. */
|
|
|
|
|
(*info->fprintf_styled_func) (info->stream, dis_style_text, "%c", *p);
|
|
|
|
|
p += 1;
|
|
|
|
|
}
|
|
|
|
|
}
|
2019-05-23 19:04:36 +02:00
|
|
|
}
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
else
|
|
|
|
|
(*info->fprintf_styled_func) (info->stream, dis_style_text, "<unknown>");
|
2019-05-23 19:04:36 +02:00
|
|
|
|
DesCGENization of the BPF binutils port
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
2023-07-15 00:50:14 +02:00
|
|
|
return insn_size;
|
2019-05-23 19:04:36 +02:00
|
|
|
}
|
