yggdrasil/binutils-gdb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
binutils-gdb/sim/lm32/ChangeLog

533 lines
13 KiB
Plaintext
Raw Normal View History

sim: overhaul & unify endian settings management The m4 macro has 2 args: the "wire" settings (which represents the hardwired port behavior), and the default settings (which are used if nothing else is specified). If none are specified, the arch is expected to support both, and the value will be probed based on the user runtime options or the input program. Only two arches today set the default value (bpf & mips). We can probably let this go as it only shows up in one scenario: the sim is invoked, but with no inputs, and no user endian selection. This means bpf will not behave like the other arches: an error is shown and forces the user to make a choice. If an input program is used though, we'll still switch the default to that. This allows us to remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting. For the ports that set a "wire" endian, move it to the runtime init of the respective sim_open calls. This allows us to change the WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting if they want to force a specific endianness. With all the endian logic moved to runtime selection, we can move the configure call up to the common dir so we only process it once across all ports. The ppc arch was picking the wire endian based on the target used, but since we weren't doing that for other biendian arches, we can let this go too. We'll rely on the input selecting the endian, or make the user decide.
2021-06-15 19:51:52 -04:00
2021-06-17 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
* sim-if.c (sim_open): Set current_target_byte_order.
* aclocal.m4, configure: Regenerate.
sim: drop obsolete AC_EXEEXT call The current autoconf 2.69 defines this to nothing because the logic in AC_PROG_CC takes care of it all the time now. Delete the call.
2021-06-15 22:48:50 -04:00
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: drop arch-specific config.h All of the settings in here are handled by the common top-level config.h, so drop the individual arch-config.h files entirely. This will also help guarantee that we don't add any new arch specific defines that would affect common code which will help with the effort of unifying them.
2021-06-13 01:54:48 -04:00
2021-06-16 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
* config.in: Removed.
sim: move dv-sockser define to CPPFLAGS This is the only define left in m4/ that is not in the common config.h, so move it to sim_hw_cflags so we can drop the arch-specific config.h.
2021-06-13 01:52:01 -04:00
2021-06-15 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
sim: assume sys/select.h always exists Now that gnulib provides this, assume it exists.
2021-05-29 15:20:28 -04:00
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* dv-lm32uart.c: Include sys/select.h.
sim: overhaul alignment settings management Currently, the sim-config module will abort if alignment settings haven't been specified by the port's configure.ac. This is a bit weird when we've allowed SIM_AC_OPTION_ALIGNMENT to seem like it's optional to use. Thus everyone invokes it. There are 4 alignment settings, but really only 2 matters: strict and nonstrict. The "mixed" setting is just the default ("unset"), and "forced" isn't used directly by anyone (it's available as a runtime option for some ports). The m4 macro has 2 args: the "wire" settings (which represents the hardwired port behavior), and the default settings (which are used if nothing else is specified). If none are specified, then the build won't work (see above as if SIM_AC_OPTION_ALIGNMENT wasn't called). If default settings are provided, then that is used, but we allow the user to override at runtime. Otherwise, the "wire" settings are used and user runtime options to change are ignored. Most ports specify a default, or set the "wire" to nonstrict. A few set "wire" to strict, but it's not clear that's necessary as it doesn't make the code behavior, by default, any different. It might make things a little faster, but we should provide the user the choice of the compromises to make: force a specific mode at compile time for faster runtime, or allow the choice at runtime. More likely it seems like an oversight when these ports were initially created, and/or copied & pasted from existing ports. With all that backstory, let's get to what this commit does. First kill off the idea of a compile-time default alignment and set it to nonstrict in the common code. For any ports that want strict alignment by default, that code is moved to sim_open while initializing the sim. That means WITH_DEFAULT_ALIGNMENT can be completely removed. Moving the default alignment to the runtime also allows removal of setting the "wire" settings at configure time. Which allows removing of all arguments to SIM_AC_OPTION_ALIGNMENT and moving that call to common code. The macro logic can be reworked to not pass WITH_ALIGNMENT as -D CPPFLAG and instead move it to config.h. All of these taken together mean we can hoist the macro up to the top level and share it among all sims so behavior is consistent among all the ports.
2021-06-07 00:54:20 -04:00
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT.
* sim-if.c (sim_open): Set current_alignment.
sim: unify assert build settings Move the --sim-enable-assert option up to the common dir so we only test & export it once across all ports.
2021-06-06 18:45:05 -04:00
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, config.in, configure: Regenerate.
sim: unify platform function & header tests Move the various platform tests up a level to avoid duplication across the ports. When building multiple versions, this speeds things up a bit. For now we move the obvious stuff up a level, but we don't turn own the config.h entirely just yet -- we still have some tests related to libraries that need consideration.
2021-05-17 20:34:52 -04:00
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
sim: cgen: inline cgen_init logic This function has done only one thing: post-process command line settings to see if profiling or tracing has been enabled, and if so, set the run_fast_p flag in the simulator state. That flag is only used in one place: to select the fast or slow cgen engine. By inlining the run_fast_p logic to the one place it's used, we can delete a good amount of logic specific to cgen ports: both the call to cgen_init and the conditional simulator state. This in turn allows us to have a single simulator state struct across all ports so we can share objects more between them, and makes the sim_open calls look more consistent.
2021-06-05 10:21:46 -04:00
2021-06-09 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_open): Delete cgen_init call.
sim: cgen: invert sim_state storage for cgen ports
2016-01-21 21:13:06 -05:00
2021-05-17 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (struct sim_state): Delete.
sim: switch config.h usage to defs.h The defs.h header will take care of including the various config.h headers. For now, it's just config.h, but we'll add more when we integrate gnulib in. This header should be used instead of config.h, and should be the first include in every .c file. We won't rely on the old behavior where we expected files to include the port's sim-main.h which then includes the common sim-basics.h which then includes config.h. We have a ton of code that includes things before sim-main.h, and it sometimes needs to be that way. Creating a dedicated header avoids the ordering mess and implicit inclusion that shows up otherwise.
2021-05-01 18:05:23 -04:00
2021-05-16 Mike Frysinger <vapier@gentoo.org>
* dv-lm32cpu.c, dv-lm32timer.c, dv-lm32uart.c, lm32.c, sim-if.c,
traps.c, user.c: Include defs.h.
sim: riscv: move __int128 check to configure
2021-05-15 23:50:33 -04:00
2021-05-16 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
Add missing stdlib.h includes to sim This updates the various "mloop.in" files to emit an include of stdlib.h, to avoid warnings about 'abort' being undeclared. One such warning now remains, in mn10300.igen. I don't know offhand the best way to fix this one. 2021-05-04 Tom Tromey <tromey@adacore.com> * mloop.in: Include <stdlib.h>. sim/iq2000/ChangeLog 2021-05-04 Tom Tromey <tromey@adacore.com> * mloop.in: Include <stdlib.h>. sim/lm32/ChangeLog 2021-05-04 Tom Tromey <tromey@adacore.com> * mloop.in: Include <stdlib.h>. sim/m32r/ChangeLog 2021-05-04 Tom Tromey <tromey@adacore.com> * mloop.in: Include <stdlib.h>. sim/or1k/ChangeLog 2021-05-04 Tom Tromey <tromey@adacore.com> * mloop.in: Include <stdlib.h>.
2021-05-04 08:56:12 -06:00
2021-05-04 Tom Tromey <tromey@adacore.com>
* mloop.in: Include <stdlib.h>.
sim: add support for build-time ar & ranlib This is needed when building for a target whose ar & ranlib are incompatible with the current build system. For example, building for Windows on a Linux system. Then manually import the automake rule for libigen.a, but tweak the tool variables to use the FOR_BUILD variants.
2021-05-01 17:16:23 -04:00
2021-05-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: nrun: add local strsignal prototype While libiberty provides a definition for this for systems that lack the function (e.g. Windows), it doesn't provide a prototype. So add our own local copy in the one file that uses the func.
2021-05-01 16:30:59 -04:00
2021-05-01 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
sim: nltvals: unify common syscall tables Since libgloss provides a default syscall table for arches, use that to provide the default syscall table for ports. Only the exceptions need to be enumerated now with the common logic as the default.
2021-04-25 18:11:35 -04:00
2021-04-26 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (NL_TARGET): Delete.
sim: simplify hardware m4 macro Every port using this sets the 1st arg to yes and the 2nd arg to "". These are the defaults we probably want anyways in order to unify the codebase, so move them to the macro and only allow ports to declare extra hardware models.
2021-04-23 21:58:21 -04:00
2021-04-23 Mike Frysinger <vapier@gentoo.org>
* configure.ac (SIM_AC_OPTION_HARDWARE): Delete first two args.
* configure: Regenerate.
Do not check for sys/time.h or sys/times.h This updates the sim so that it unconditionally uses sys/time.h. This is in agreement with existing code, and a recent change to BFD. I also think that sys/times.h is never needed by the sim, so this patch removes the check and the one spot that was conditionally including it. sim/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for sys/time.h or sys/times.h. sim/aarch64/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/avr/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/bfin/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/bpf/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/common/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * sim-utils.c: Update includes. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * simops.c: Update includes. * configure, config.in: Rebuild. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * rvdummy.c: Update includes. * dv-rv.c: Update includes. * configure, config.in: Rebuild. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/erc32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/example-synacor/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/ft32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/h8300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m32c/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mcore/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/microblaze/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/moxie/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/msp430/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/ppc/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * mon.c: Update includes. * emul_unix.c: Update includes. (do_unix_gettimeofday): Update condition. sim/pru/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/riscv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * interp.c: Update includes. * configure, config.in: Rebuild. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild.
2021-04-22 19:51:54 -06:00
2021-04-22 Tom Tromey <tom@tromey.com>
* configure, config.in: Rebuild.
Remove and modernize dependencies in sim Some spots in the sim build used manual dependencies, and some spots did a compilation by hand but did not use the automatic dependency tracking code. This patch fixes these spots. I didn't touch ppc, because it doesn't use the common Makefile code. I also didn't touch objects that are for the build machine, because automatic dependencies don't work for those. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (armemu26.o, armemu32.o): Use COMPILE and POSTCOMPILE. sim/bpf/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, cpu.o, sim-if.o, traps.o): Remove. (mloop-le.o, mloop-be.o, decode-le.o, decode-be.o, sim-le.o) (sim-be.o): Use COMPILE and POSTCOMPILE. (SIM_EXTRA_DEPS): Add eng-le.h, eng-be.h. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (simops.o): Remove. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o, dv-cris.o, dv-rv.o, arch.o, traps.o) (devices.o, crisv10f.o, mloopv10f.o, cpuv10.o, decodev10.o) (modelv10.o, crisv32f.o, mloopv32f.o, cpuv32.o, decodev32.o) (modelv32.o): Remove. (SIM_EXTRA_DEPS): Add engv10.h. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (simops.o): Remove. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, devices.o, frv.o, traps.o, pipeline.o) (interrupts.o, memory.o, cache.o, options.o, reset.o) (registers.o, profile.o, profile-fr400.o, profile-fr450.o) (profile-fr500.o, profile-fr550.o, sim-if.o, mloop.o, cpu.o) (decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o): Remove. (arch.o): Use COMPILE and POSTCOMPILE. (devices.o, iq2000.o, mloop.o, cpu.o, decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (arch.o, traps.o, sim-if.o, lm32.o, mloop.o) (cpu.o, decode.o, sem.o, model.o): Remove. (SIM_EXTRA_DEPS): Add eng.h. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (sim-if.o, arch.o, traps.o, traps-linux.o) (devices.o, m32r.o, mloop.o, cpu.o, decode.o, sem.o, model.o) (m32rx.o, mloopx.o, cpux.o, decodex.o, semx.o, modelx.o) (m32r2.o, mloop2.o, cpu2.o, decode2.o, sem2.o, model2.o): Remove. (SIM_EXTRA_DEPS): Add eng.h, engx.h, eng2.h. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o): Remove. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o, m16run.o, micromipsrun.o, multi-run.o): Remove. (SIM_EXTRA_DEPS): New variable. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o): Remove. (idecode.o op_utils.o semantics.o): Remove. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (mloop.o, arch.o, cpu.o, decode.o, sem.o) (sem-switch.o, model.o): Remove. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (err.o, fpu.o, gdb-if.o, load.o, main.o, mem.o) (reg.o, rl78.o): Remove. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (err.o, fpu.o, gdb-if.o, load.o, main.o, mem.o) (misc.o, reg.o, rx.o, syscalls.o, trace.o): Remove. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (SIM_EXTRA_DEPS): New variable. (interp.o): Remove. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Makefile.in (interp.o, simops.o, semantics.o): Remove.
2021-04-22 19:51:54 -06:00
2021-04-22 Tom Tromey <tom@tromey.com>
* Makefile.in (arch.o, traps.o, sim-if.o, lm32.o, mloop.o)
(cpu.o, decode.o, sem.o, model.o): Remove.
(SIM_EXTRA_DEPS): Add eng.h.
Require GNU make GDB has required GNU make for quite some time, and this patch applies this approach to the sim as well. Requiring GNU make means that automatic dependency tracking can be simple and reliable, and it also makes other refactorings simpler. sim/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for make. sim/aarch64/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/arm/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/avr/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/bfin/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/common/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * Make-common.in: Require GNU make. sim/cr16/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/cris/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/d10v/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/erc32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/example-synacor/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/frv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/ft32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/h8300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/iq2000/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/lm32/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/m32c/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/m32r/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/m68hc11/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/mcore/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/microblaze/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/mips/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/mn10300/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/moxie/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/msp430/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/or1k/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/pru/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/riscv/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/rl78/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/rx/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/sh/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild. sim/v850/ChangeLog 2021-04-22 Tom Tromey <tom@tromey.com> * configure: Rebuild.
2021-04-22 19:51:54 -06:00
2021-04-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
sim: regen against sim/m4/ My scripts weren't updated to use new -I../m4 as the first arg.
2021-04-21 20:39:24 -04:00
2021-04-21 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4: Regenerate.
sim: use -Werror when probing for supported warning flags When building with clang, we get: error: unknown warning option '-Wmissing-parameter-type' [-Werror,-Wunknown-warning-option] This is because clang only warns by default when encountering an unknown warning option, and the probe for supported warning flags is done without -Werror. All flags are therefore accepted by configure, but then it breaks when actually compiling a source file with -Werror. This is equivalent to this commit in gdb: 3e019bdc20eb81b91ab5bc774386201b874c0bac gdb: Use -Werror when checking for (un)supported warning flags We then see some other compilation errors when building with clang and -Werror, they can be dealt with later.
2021-04-21 14:51:10 -04:00
2021-04-21 Simon Marchi <simon.marchi@polymtl.ca>
* configure: Regenerate.
sim: switch to AC_CHECK_FUNCS_ONCE & merge a little This avoids duplicate tests for functions between common m4, arches, and any other sources that would trigger func tests. Also manually delete known duplicate function tests between the m4, bfin, and v850 ports.
2021-04-18 21:50:07 -04:00
2021-04-18 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim lm32: Use a known-good shell with genmloop.sh. Explicitly use a known-good shell found by autoconf for executing additional scripts in genmloop.sh rather than the building user's shell. sim/lm32/ChangeLog: * Makefile.in: Pass -shell to genmloop.sh.
2021-04-15 16:03:15 -07:00
2021-04-15 John Baldwin <jhb@FreeBSD.org>
* Makefile.in: Pass -shell to genmloop.sh.
sim: cgen: move cgen_cpu_max_extra_bytes logic into the common code Every arch handles this the same way, so move it to the common code. This will also make unifying the sim_cpu structure easier.
2016-08-12 22:12:41 +08:00
2021-04-12 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all.
Do not use old-style definitions in sim This changes all the non-generated (hand-written) code in sim to use "new" (post-K&R) style function definitions. 2021-04-08 Tom Tromey <tom@tromey.com> * bpf.c (bpf_def_model_init): Use new-style declaration. sim/common/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * cgen-utils.c (RORQI, ROLQI, RORHI, ROLHI, RORSI, ROLSI): Use new-style declaration. sim/erc32/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sis.c (run_sim, main): Use new-style declaration. * interf.c (run_sim, sim_open, sim_close, sim_load) (sim_create_inferior, sim_store_register, sim_fetch_register) (sim_info, sim_stop_reason, flush_windows, sim_do_command): Use new-style declaration. * help.c (usage, gen_help): Use new-style declaration. * func.c (batch, set_regi, set_rega, disp_reg, limcalc) (reset_stat, show_stat, init_bpt, int_handler, init_signals) (disp_fpu, disp_regs, disp_ctrl, disp_mem, dis_mem, event) (init_event, set_int, advance_time, now, wait_for_irq, check_bpt) (reset_all, sys_reset, sys_halt): Use new-style declaration. * float.c (get_accex, clear_accex, set_fsr): Use new-style declaration. * exec.c (sub_cc, add_cc, log_cc, dispatch_instruction, fpexec) (chk_asi, execute_trap, check_interrupts, init_regs): Use new-style declaration. * erc32.c (init_sim, reset, decode_ersr, mecparerror) (error_mode, decode_memcfg, decode_wcr, decode_mcr, sim_halt) (close_port, exit_sim, mec_reset, mec_intack, chk_irq, mec_irq) (set_sfsr, mec_read, mec_write, init_stdio, restore_stdio) (port_init, read_uart, write_uart, flush_uart, uarta_tx) (uartb_tx, uart_rx, uart_intr, uart_irq_start, wdog_intr) (wdog_start, rtc_intr, rtc_start, rtc_counter_read) (rtc_scaler_set, rtc_reload_set, gpt_intr, gpt_start) (gpt_counter_read, gpt_scaler_set, gpt_reload_set, timer_ctrl) (memory_read, memory_write, get_mem_ptr, sis_memory_write) (sis_memory_read): Use new-style declaration. sim/frv/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, frv_sim_close, sim_create_inferior): Use new-style declaration. sim/h8300/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * compile.c (cmdline_location): Use new-style declaration. sim/iq2000/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, sim_create_inferior): Use new-style declaration. * iq2000.c (fetch_str): Use new-style declaration. sim/lm32/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, sim_create_inferior): Use new-style declaration. sim/m32r/ChangeLog 2021-04-08 Tom Tromey <tom@tromey.com> * sim-if.c (sim_open, sim_create_inferior): Use new-style declaration.
2021-04-08 06:41:25 -06:00
2021-04-08 Tom Tromey <tom@tromey.com>
* sim-if.c (sim_open, sim_create_inferior): Use new-style
declaration.
sim: unify toolchain settings The toplevel, common, and igen dirs all have their own code for setting up toolchain settings. Unify all of that in a new macro.
2021-01-17 14:45:25 -05:00
2021-04-02 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, configure: Regenerate.
sim: require AC_PROG_CPP explicitly All the scripts were using this implicitly already, so there's no real change for them, but we want to call it explicitly as the CPP tool is used to generate nltvals.def.
2021-02-21 19:24:10 -05:00
2021-02-28 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: common: split up acinclude.m4 into individual m4 files This file is quite large and is getting unmanageable. Split it apart to follow aclocal best practices by putting one-macro-per-file. There shouldn't be any real functional changes here as can be seen in the configure script regens.
2021-02-06 22:51:30 -05:00
2021-02-21 Mike Frysinger <vapier@gentoo.org>
* configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
* aclocal.m4, configure: Regenerate.
sim: switch to AC_CONFIG_MACRO_DIRS Rather than hand maintain m4 includes in various autotool files, use AC_CONFIG_MACRO_DIRS to declare the relevant search paths. This simplifies the code, makes it more robust, and cleans out unused logic from configure.
2021-02-06 19:46:16 -05:00
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
* aclocal.m4, configure: Regenerate.
sim: drop use of bfd/configure.host These settings might have made sense in darker compiler times, but I think they're largely obsolete now. Looking through the values that get used in HDEFINES, it's quite limited, and configure itself should handle them. If we still need something, we can leverage standard autoconf macros instead, after we get a clear user report. TDEFINES was never set anywhere and was always empty, so prune that.
2021-01-17 13:39:03 -05:00
2021-02-06 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: call SIM_AC_OPTION_WARNINGS(no) in remaining ports We want all ports to opt into extra warnings as the default compiler settings lets a lot slide. Opt all the ports that haven't already in to the warning system. None of them build with -Werror, so disable that by default. Hopefully someone finds these important enough to start fixing at some point.
2021-01-09 14:16:10 -05:00
2021-01-11 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Call SIM_AC_OPTION_WARNINGS.
* configure: Regenerate.
sim: clean up C11 header includes Since we require C11 now, we can assume many headers exist, and clean up all of the conditional includes. It's not like any of this code actually accounted for the headers not existing, just whether we could include them. The strings.h cleanup is a little nuanced: it isn't in C11, but every use of it in the codebase will include strings.h only if string.h doesn't exist. Since we now assume the C11 string.h exists, we'll never include strings.h, so we can delete it.
2021-01-09 03:56:10 -05:00
2021-01-11 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
* sim-if.c: Delete HAVE_STDLIB_H.
sim: clean up stale AC_PREREQ refs This was purged from the tree when we upgraded to autoconf-2.69, but a few references in the sim tree were missed.
2021-01-09 02:12:27 -05:00
2021-01-09 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: require a C11 compiler With GDB requiring a C++11 compiler now, this hopefully shouldn't be a big deal. It's been 10 years since C11 came out, so should be plenty of time to upgrade. This will allow us to start cleaning up random header logic and many of our non-standard custom types.
2021-01-08 02:24:51 -05:00
2021-01-08 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: update bug URI to https://
2021-01-03 03:09:04 -05:00
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
Honor an existing CC_FOR_BUILD in the environment for sim. This matches the equivalent bits in bfd/acinclude.m4 sim/ChangeLog: * configure.ac: Honor existing CC_FOR_BUILD in environment. * configure: Regenerate. sim/aarch64/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * configure: Regenerate. sim/avr/ChangeLog: * configure: Regenerate. sim/bfin/ChangeLog: * configure: Regenerate. sim/common/ChangeLog: * acinclude.m4 (SIM_AC_COMMON) Honor existing CC_FOR_BUILD in environment. sim/cr16/ChangeLog: * configure: Regenerate. sim/cris/ChangeLog: * configure: Regenerate. sim/d10v/ChangeLog: * configure: Regenerate. sim/erc32/ChangeLog: * configure: Regenerate. sim/frv/ChangeLog: * configure: Regenerate. sim/ft32/ChangeLog: * configure: Regenerate. sim/h8300/ChangeLog: * configure: Regenerate. sim/iq2000/ChangeLog: * configure: Regenerate. sim/lm32/ChangeLog: * configure: Regenerate. sim/m32c/ChangeLog: * configure: Regenerate. sim/m32r/ChangeLog: * configure: Regenerate. sim/m68hc11/ChangeLog: * configure: Regenerate. sim/mcore/ChangeLog: * configure: Regenerate. sim/microblaze/ChangeLog: * configure: Regenerate. sim/mips/ChangeLog: * configure: Regenerate. sim/mn10300/ChangeLog: * configure: Regenerate. sim/moxie/ChangeLog: * configure: Regenerate. sim/msp430/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * configure: Regenerate. sim/rx/ChangeLog: * configure: Regenerate. sim/sh/ChangeLog: * configure: Regenerate. sim/sh64/ChangeLog: * configure: Regenerate. sim/v850/ChangeLog: * configure: Regenerate.
2017-09-06 10:16:12 -07:00
2017-09-06 John Baldwin <jhb@FreeBSD.org>
* configure: Regenerate.
sim: use ARRAY_SIZE instead of ad-hoc sizeof calculations
2017-02-13 00:12:35 -05:00
2017-02-13 Mike Frysinger <vapier@gentoo.org>
* decode.c (lm32bf_init_idesc_table): Use ARRAY_SIZE.
sim: unify symbol table handling The common sim tracing code already handles loading and tracking of symbols from the target program so that it can show symbol info in trace/disassembly calls. Once we touch up the trace code and add a few API callbacks, ports don't need to do loading and searching of symbol tables themselves anymore.
2016-01-21 22:17:59 -05:00
2016-08-15 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (find_limit): Change prototype to take a SIM_DESC.
Replace symbol lookup code with a call to trace_sym_value.
(sim_open): Update find_limit call.
sim: move many common settings from CPPFLAGS to config.h Rather than stuffing the command line with a bunch of -D flags, start moving things to config.h which is managed by autoheader. This makes the makefile a bit simpler and the build output tighter, and it makes the migration to automake easier as there are fewer vars to juggle. We'll want to move the other options out too, but it'll take more work.
2016-01-09 04:09:35 -05:00
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
sim: drop unused SIM_AC_OPTION_PACKAGES This was imported from the ppc sim, but that was only used to control a single file, and that is already governed by the hw models. There's no need to have a sep configure option here, especially since none of the other sims are using it. Even when the code is enabled, there's no runtime overhead.
2016-01-10 17:49:48 -05:00
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: allow the environment configure option everywhere Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in order to make the configure flag available. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports too.
2016-01-10 16:52:25 -05:00
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
* configure: Regenerate.
sim: drop --enable-sim-cflags option No other sub directory provides such a configuration option, so drop it from the sim dir as well. This cleans up a good bit of code in the process. If people want to use custom flags for just the sim, they can still run configure+make by hand in the sim subdir and use the normal CFLAGS settings.
2016-01-09 04:00:53 -05:00
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: drop --enable-sim-{regparm,stdcall} options These options were never exposed for most sims (just the ppc one), and they are really only useful on 32-bit x86 systems. Considering modern systems tend to be 64-bit x86_64 and how well modern compilers are at optimizing code, these have outlived their usefulness.
2016-01-09 05:13:37 -05:00
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: allow the inline configure option everywhere Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order to make the configure flag available. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports too.
2016-01-09 05:58:01 -05:00
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: drop targ-vals.def->nltvals.def indirection We don't have alternative nltvals.def files, so always symlinking the targ-vals.def file to it doesn't gain us anything. It does make the build more complicated though and a pain to convert to something newer (like automake). Drop the symlinking entirely. In the future, we'll want to explode this file anyways into the respective arch dirs so things can be selected dynamically at runtime, so it's not like we'll be bringing this back.
2016-01-10 03:50:08 -05:00
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: allow the assert configure option everywhere Currently ports have to call SIM_AC_OPTION_ASSERT explicitly in order to make the configure flag available, which none of them do. There's no real reason to not allow this flag for all ports, so move it to the common sim macro. This way we get standard behavior across all ports.
2016-01-10 15:55:44 -05:00
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: drop common/cconfig.h in favor of a single config.h The common subdir sets up a cconfig.h file to hold checks for the common code. In practice, most files still end up using config.h instead which just leads to confusion. Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON so we can drop the cconfig.h file altogether. Now there is only a single config.h file like normal.
2016-01-08 20:23:37 -05:00
2016-01-09 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
sim: sim_{create_inferior,open,parse_args}: constify argv/env slightly 2016-01-03 Mike Frysinger <vapier@gentoo.org> * sim-options.c (sim_parse_args): Mark argv array const. * sim-options.h (sim_parse_args): Likewise.
2016-01-03 01:51:44 -05:00
2016-01-06 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_open): Mark argv const.
(sim_create_inferior): Mark argv and env const.
sim: punt x86-specific bswap logic The compiler/C library should produce reasonable code for htonl/ntohl, and at least glibc tries pretty hard to always produce good code for them. This logic only had support for 32-bit x86 systems anymore, and it's unlikely people were even opting into this, so drop it all.
2016-01-04 04:06:01 -05:00
2016-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: parse_args: display getopt error ourselves Fix a long standing todo where we let getopt write directly to stderr when an invalid option is passed. Use the sim io funcs instead as they go through the filtered callbacks that gdb wants.
2016-01-03 21:40:34 -05:00
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_open): Update sim_parse_args comment.
sim: drop host endian configure option The --enable-sim-hostendian flag was purely so people had an escape route for when cross-compiling. This is because historically, AC_C_BIGENDIAN did not work in those cases. That was fixed a while ago though, so we can require that macro everywhere now and simplify a good bit of code.
2016-01-03 00:36:13 -05:00
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
* configure: Regenerate.
sim: convert to bfd_endian Rather than re-invent endian defines, as well as maintain our own list of OS & arch-specific includes, punt all that logic in favor of the bfd ones already set up and maintained elsewhere. We already rely on the bfd library, so leveraging the endian aspect should be fine.
2016-01-02 17:46:16 -05:00
2016-01-02 Mike Frysinger <vapier@gentoo.org>
* arch.h (TARGET_BIG_ENDIAN): Delete.
* configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG.
* configure: Regenerate.
sim: iq2000/m32r/lm32/sh64: delete dead option code The iq2000/m32r/sh64 option parsing logic appears to have always been dead. At least iq2000/sh64 are simply copy & paste rot from m32r. The lm32 option parsing hack here hasn't been needed for a while -- this was fixed back in commit 11409fac6b95d71a92848a4499b02d60a4f4c5bb in the common code.
2016-01-02 10:29:51 -05:00
2016-01-02 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (free_state, print_lm32_misc_cpu): Delete prototypes.
(lm32_option_handler, OPTION_ENDIAN, lm32_options): Delete.
(sim_open): Delete sim_add_option_table call.
sim: delete dead current_state globals The global current_state handle to the current simulator state is a design idea that was half implemented, but never really cleaned up. The point was to have a global variable pointing to the state so that funcs could more quickly & easily access the state anywhere. We've instead moved in the direction of passing state around everywhere and don't have any intention of moving back. I also can't find any references to gdb using this variable, or to cgen related "dump_regs" functions, both of which were used in the comments related to this code.
2016-01-02 09:23:06 -05:00
2016-01-02 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (current_state): Delete.
(sim_open): Delete current_state assignment.
sim: unify sim-hload Pretty much all targets are using this module already, so add it to the common list of objects. The only oddball out here is cris and that's because it supports loading via an offset for all the phdrs. We drop support for that.
2015-04-10 19:40:34 -04:00
2015-12-27 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-hload.o.
sim: punt WITH_DEVICES & tconfig.h support No arch is using this anymore, and we want all new ports using the hardware framework instead. Punt WITH_DEVICES and the two callbacks device_io_{read,write}_buffer. We can also punt the tconfig.h file as no port is using it anymore. This fixes in-tree builds that get confused by picking up the wrong one (common/ vs <port>/) caused by commit ae7d0cac8ce971f7108d270c. Any port that needs to set up a global define can use their own sim-main.h file that they must provide regardless.
2015-12-26 20:20:23 -05:00
2015-12-26 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
sim: standardize sim_create_inferior handling of argv a bit more For targets that process argv in sim_create_inferior, improve the code: - provide more details in the comment - make the check for when to re-init more robust - clean out legacy sim_copy_argv code This will be cleaned up more in the future when we have a common inferior creation function, but at least help new ports get it right until then.
2015-12-26 07:05:41 -05:00
2015-12-26 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_create_inferior): Replace old #if 0 code with dupargv.
sim: sim-model: build for everyone Rather than include this for some targets, set it up so we can build it all the time via the common code. This makes it easier for targets to opt into it when they're ready, increases build coverage, and allows us to centralize much of the logic. We also get to delete tconfig.h from two more targets -- they were setting WITH_DEVICES to 0 which has the same behavior as not defining it at all. While the SIM_HAVE_MODEL knob is gone, we now have WITH_MODEL_P, but it is only used by the common sim-model code. We use it to declare dummy model lists when the arch hasn't created its own.
2015-12-25 04:27:27 -05:00
2015-12-25 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-model.o.
sim: move MACH/MODEL types into SIM_xxx namespace The "MACH" and "MODEL" names are a bit generic and collide with symbols used by other sections of code (like h8300's opcodes). Since these are sim-specific types, they really should have a "SIM_" prefix.
2015-12-25 04:12:55 -05:00
2015-12-25 Mike Frysinger <vapier@gentoo.org>
* arch.c: Rename MACH to SIM_MACH.
* cpuall.h: Likewise.
* model.c: Rename MACH to SIM_MACH, MACH_IMP_PROPERTIES to
SIM_MACH_IMP_PROPERTIES, and MODEL to SIM_MODEL.
sim: move WITH_SCACHE_PBB to sim-main.h This helps us break up tconfig.h more. Any file using this define should be pulling in sim-main.h already, so things should continue working.
2015-12-25 02:34:40 -05:00
2015-12-25 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (WITH_SCACHE_PBB): Move from ...
* tconfig.h (WITH_SCACHE_PBB): ... here. Delete file.
sim: make LMA loading the default for all targets Most targets already default to loading code via their LMA, but for a few, this means the default changes from loading VMA to LMA. It's better to have the different targets be consistent, and allows some code clean up.
2015-12-24 21:36:09 -05:00
2015-12-24 Mike Frysinger <vapier@gentoo.org>
* tconfig.h (SIM_HANDLES_LMA): Delete.
sim: sim-stop/sim-reason/sim-reg: move to common obj list Now that all arches (for the most part) have moved over, move sim-stop.o, sim-reason.o, and sim-reg.o to the common object list and out of all the arch ports.
2015-11-15 20:06:42 -08:00
2015-11-15 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-reason.o, sim-reg.o, and
sim-stop.o.
sim: clean up redundant objects Some of the target makefiles listed objects that were already pulled in via SIM_NEW_COMMON_OBJS. Clean those up.
2015-11-15 02:43:11 -05:00
2015-11-14 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-signal.o.
sim: sim-close: unify sim_close logic Other than the nice advantage of all sims having to declare one fewer common function, this also fixes leakage in pretty much every sim. Many were not freeing any resources, and a few were inconsistent as to the ones they did. Now we have a single module that takes care of all the logic for us. Most of the non-cgen based ones could be deleted outright. The cgen ones required adding a callback to the arch-specific cleanup func. The few that still have close callbacks are to manage their internal state. We do not convert erc32, m32c, ppc, rl78, or rx as they do not use the common sim core.
2015-03-22 23:10:09 -04:00
2015-11-14 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_close): Delete.
sim: use AS_HELP_STRING everywhere This helps standardize the configure --help output.
2015-06-23 23:43:48 +05:45
2015-06-23 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: syscall: add common sim_syscall helpers Many ports have the same sim syscall logic, so add some helpers to handle all the common details. The arches still have to deal with the unpacking and packing of the syscall arguments, but the rest of the sim<->callback glue is now shared.
2015-06-15 19:22:38 +05:45
2015-06-17 Mike Frysinger <vapier@gentoo.org>
* traps.c (lm32bf_scall_insn): Replace call to cb_syscall with
sim_syscall_multi.
sim: syscall: unify memory helpers Almost every port implements these two callbacks in the same way, so unify them in the common layer.
2015-06-15 21:09:21 +05:45
2015-06-17 Mike Frysinger <vapier@gentoo.org>
* traps.c: Include sim-syscall.h.
(syscall_read_mem, syscall_write_mem): Delete.
(lm32bf_scall_insn): Change syscall_read_mem/syscall_write_mem
to sim_syscall_read_mem/sim_syscall_write_mem.
sim: drop -DTRACE from configure No code uses this anymore and the symbol conflicts with the new TRACE helper. Punt it from configure.
2015-06-12 10:32:54 -04:00
2015-06-12 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: update configure.in->configure.ac docs A few places still refer to the configure.in file; update them.
2015-06-12 12:04:42 -04:00
2015-06-12 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: cgen: namespace custom trace functions The cgen code declares some macros/funcs using the trace_xxx prefix, but the code isn't generic and only works with cgen targets. This is blocking the creation of new common trace functions. Let's blindly add cgen_xxx prefixes to all these symbols. Some already use this convention to avoid conflicts, so it makes sense to align them. In the future we might want to move some to the common trace core, but one thing at a time.
2015-06-12 13:29:02 +05:45
2015-06-12 Mike Frysinger <vapier@gentoo.org>
* decode.c (lm32bf_decode): Change TRACE_EXTRACT to CGEN_TRACE_EXTRACT.
* mloop.in (execute): Change TRACE_INSN_INIT to CGEN_TRACE_INSN_INIT,
TRACE_INSN to CGEN_TRACE_INSN, and TRACE_INSN_FINI to CGEN_TRACE_INSN_FINI.
* sem.c: Rename TRACE_RESULT to CGEN_TRACE_RESULT.
* sem-switch.c: Likewise.
sim: clean up duplicate sim-engine hooks Now that we've unified sim-cpu, we can delete the duplicate sim-engine hooks -- these targets defined these only because they didn't fully implement the sim-cpu callbacks.
2015-04-18 04:38:33 -04:00
2015-04-18 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (SIM_ENGINE_HALT_HOOK, SIM_ENGINE_RESTART_HOOK): Delete.
sim: trim old USING_SIM_BASE_H define This doesn't appear to have been used since 1998, but wasn't cleaned up since. So much for being "quick" ;).
2015-04-18 04:22:25 -04:00
2015-04-18 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (USING_SIM_BASE_H): Delete.
sim: unify SIM_CPU definition Since every target typedefs this the same way, move it to the common code. We have to leave Blackfin behind here for now because of inter-dependencies on types and headers: sim-base.h includes sim-model.h which needs types in machs.h which needs types in bfim-sim.h which needs SIM_CPU.
2015-04-18 04:19:56 -04:00
2015-04-18 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (_sim_cpu, SIM_CPU): Delete.
sim: unify sim_cia definition Almost every target defines sim_cia the same way -- either using the address_word type directly, or a type of equivalent size. The only odd one out is sh64 (who has 32bit address_word and 64bit cia), and even that case doesn't seem to make sense. We'll put off clean up though of sh64 and at least set up a sensible default for everyone.
2015-04-18 04:08:56 -04:00
2015-04-18 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (sim_cia): Delete.
sim: replace CIA_{GET,SET} with CPU_PC_{GET,SET} The CIA_{GET,SET} macros serve the same function as CPU_PC_{GET,SET} except the latter adds a layer of indirection via the sim state. This lets models set up different functions at runtime and doesn't reach so directly into the arch-specific cpu state. It also doesn't make sense to have two sets of macros that do exactly the same thing, so lets standardize on the one that gets us more.
2015-04-16 02:11:12 -04:00
2015-04-17 Mike Frysinger <vapier@gentoo.org>
* dv-lm32cpu.c (deliver_lm32cpu_interrupt): Change CIA_GET to
CPU_PC_GET.
(lm32cpu_port_event): Likewise.
* sim-main.h (CIA_GET, CIA_SET): Delete.
* traps.c (lm32_core_signal): Change CIA_SET to CPU_PC_SET.
sim: unify sim-cpu usage Now that all the targets are utilizing CPU_PC_{FETCH,STORE}, and the cpu state is multicore, and the STATE_CPU defines match, we can move it all to the common code.
2015-04-15 02:13:23 -04:00
2015-04-15 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-cpu.o.
* sim-main.h (STATE_CPU): Delete.
sim: cris/frv/h8300/iq2000/lm32/m32r/sh64: standardize cpu state This sets up the sim_state structure and the cpu member to match what we do in most other sims, and what the common code suggests. This is a step to unifying on the sim-cpu.o object.
2015-04-15 01:22:34 -04:00
2015-04-15 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (struct sim_state): Change cpu to an array of pointers.
(STATE_CPU): Handle WITH_SMP.
sim: fix the PKGVERSION define This should be SIM, not GDB.
2015-04-13 02:38:57 -04:00
2015-04-13 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: move sim-engine.o/sim-hrw.o to the common list This makes these two objects available to all sims by default.
2015-04-06 23:40:00 -04:00
2015-04-06 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
sim: update zlib handling With zlib being mandatory, and the updated m4 configs, we need to regen and use the new settings w/bfd to avoid linkage errors.
2015-03-31 23:32:49 -04:00
2015-03-31 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
sim: fix sim-hardware configure option The current default handling for the --enable-sim-hardware option ends up forcing the value to whatever is set as the first argument when calling the macro (by virtue of how autoconf works). Relocate the setup code to the 4th parameter of the AC_ARG_ENABLE macro to fix it. This was caused by the simplification work in 1517bd274290e06af498ef7e49. Reported-by: Hans-Peter Nilsson <hans-peter.nilsson@axis.com>
2015-03-23 22:19:41 -04:00
2015-03-24 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: drop support for requiring hw support Since no sim is using the "always" option to SIM_AC_OPTION_HARDWARE, and we don't want to require hw support to always be enabled, drop the option. This leads to a slight simplification in the macro too as we can collapse the sim_hw_p variable.
2015-03-23 22:45:13 -04:00
2015-03-23 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim: dv-sockser: move build to common dir If dv-sockser is available, lets add it to the common SIM_HW_OBJS variable so it is always included automatically. Now ports do not have to shoe horn it in directly themselves. It does mean it will be compiled for targets that don't explicitly use it, but that's really what we want anyways.
2015-03-22 22:36:12 -04:00
2015-03-23 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
* Makefile.in (SIM_OBJS): Delete @SIM_DV_SOCKSER_O@.
sim: rename tconfig.in to tconfig.h Rather than manually include tconfig.h when we think we'll need it (which is error prone as it can define symbols we expect from config.h), have it be included directly by config.h. Since we know we have to include that header everywhere already, this will make sure tconfig.h isn't missed. It should also be fine as tconfig.h is supposed to be simple and only set up a few core defines for the target. This allows us to stop symlinking it in place all the time and just use it straight out of the respective source directory.
2015-03-14 23:41:25 -04:00
2015-03-16 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, config.in, configure: Regenerate.
* tconfig.in: Rename file ...
* tconfig.h: ... here.
sim: dv-sockser: push module init prototype down Pull out the duplicated dv_sockser_install prototype from the tconfig.in files and put it in the one place it gets used -- sim-module.c. This is still arguably incorrect, but it's better than the status quo where the tconfig.in has to include header files and duplicate the dv-sockser func. The tconfig header is meant to be simple and contain a target defines.
2015-03-15 02:55:08 -04:00
2015-03-15 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Add @SIM_DV_SOCKSER_O@.
sim: make nrun the default run program We want people to stop using the run.c frontend, but it's hard to notice when it's still set as the default. Lets flip things so nrun.c is the default, and users of run.c will get an error by default. We turn that error into a warning for existing sims so we don't break them -- this is mostly meant for people starting new ports.
2015-02-19 03:46:01 -05:00
2015-03-14 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_RUN_OBJS): Delete.
Fix --diable-shared --enable-plugins build breakage Directories that don't use libtool need to add -ldl (on most *nix hosts) to provide dlopen for libbfd. config/ * plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to LIBS via AC_SEARCH_LIBS. gdb/ * acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl. * config.in: Regenerate. sim/ppc/ * configure.ac: Invoke AC_PLUGINS. * config.in: Regenerate. and regen lots of configure files.
2014-08-19 21:59:56 +09:30
2014-08-19 Alan Modra <amodra@gmail.com>
* configure: Regenerate.
Regenerate sim configury.
2014-08-15 15:46:40 -07:00
2014-08-15 Roland McGrath <mcgrathr@google.com>
* configure: Regenerate.
* config.in: Regenerate.
strip off +x bits on non-executable/script files These files are source files and have no business being +x. We couldn't easily fix it in CVS (you need login+write access to the raw rcs files), but we can fix this w/git. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-12-03 19:40:24 -05:00
2013-12-07 Mike Frysinger <vapier@gentoo.org>
* ChangeLog: Remove +x file mode.
Regenerate sim configure files to pick up support for powerpc64le in libtool.m4.
2013-09-23 00:32:27 +00:00
2013-09-23 Alan Modra <amodra@gmail.com>
* configure: Regenerate.
sim: use AM_MAINTAINER_MODE I noticed the sim code is using an old implementation of the maintainer logic. I cut it over to the new macro (like gdb has been doing). In practice, it makes no difference currently as nothing in the sim tree uses it, but I have a follow up commit for the Blackfin tree that needs it.
2013-06-05 01:42:13 +00:00
2013-06-03 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, configure: Regenerate.
sim: rewrite SIM_AC_OPTION_HARDWARE a bit to simplify things There's no need to put the majority of the logic into the 3rd arg of the AC_ARG_ENABLE. Coupled with the lack of indentation, it makes it hard to follow, error prone to update, and duplicates code (with the 4th arg). So pull the logic out of the 3rd arg and outside of the AC_ARG_ENABLE macro. This allows us to gut the 4th arg entirely, merge with the code that followed the macro, and fix bugs related to the new dv-sockser in the process. Hopefully building the various sims with the default sim-hardware settings, as well as with explicit --{dis,en}able-sim-hardware flags, should all just work now.
2013-03-26 18:00:04 +00:00
2013-03-26 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
Define PACKAGE macro in all sims' config.h. Some of the common includes in include/gdb such as callback.h include bfd.h. But there was a recent change in bfd-in.h to require that config.h be included before bfd.h can be included: /* PR 14072: Ensure that config.h is included first. */ #if !defined PACKAGE && !defined PACKAGE_VERSION #error config.h must be included before this header #endif PACKAGE_VERSION is always defined by default by the AC_INIT autoconf macro, but PACKAGE isn't. This patch updates the SIM_AC_COMMON macro to define it, and then regenerates all configure scripts and config.in files. sim/common/changeLog: * acinclude.m4 (SIM_AC_COMMON): Define PACKAGE. * config.in, configure: Regenerate. sim/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * config.in, configure: Regenerate. sim/avr/ChangeLog: * config.in, configure: Regenerate. sim/bfin/ChangeLog: * config.in, configure: Regenerate. sim/cr16/ChangeLog: * config.in, configure: Regenerate. sim/cris/ChangeLog: * config.in, configure: Regenerate. sim/d10v/ChangeLog: * config.in, configure: Regenerate. sim/erc32/ChangeLog: * config.in, configure: Regenerate. sim/frv/ChangeLog: * config.in, configure: Regenerate. sim/h8300/ChangeLog: * config.in, configure: Regenerate. sim/iq2000/ChangeLog: * config.in, configure: Regenerate. sim/lm32/ChangeLog: * config.in, configure: Regenerate. sim/m32c/ChangeLog: * config.in, configure: Regenerate. sim/m32r/ChangeLog: * config.in, configure: Regenerate. sim/m68hc11/ChangeLog: * config.in, configure: Regenerate. sim/mcore/ChangeLog: * config.in, configure: Regenerate. sim/microblaze/ChangeLog: * config.in, configure: Regenerate. sim/mips/ChangeLog: * config.in, configure: Regenerate. sim/mn10300/ChangeLog: * config.in, configure: Regenerate. sim/moxie/ChangeLog: * config.in, configure: Regenerate. sim/ppc/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * config.in, configure: Regenerate. sim/rx/ChangeLog: * config.in, configure: Regenerate. sim/sh/ChangeLog: * config.in, configure: Regenerate. sim/sh64/ChangeLog: * config.in, configure: Regenerate. sim/v850/ChangeLog: * config.in, configure: Regenerate. sim/testsuite/ChangeLog: * configure: Regenerate.
2012-06-15 17:20:10 +00:00
2012-06-15 Joel Brobecker <brobecker@adacore.com>
* config.in, configure: Regenerate.
[PATCH] sim: make sure to include strsignal prototype Before POSIX standardized strsignal(), old systems would hide the prototype unless the normal extension defines were enabled. So use the AC_USE_SYSTEM_EXTENSIONS helper for that. Then make sure we include string.h ourselves in nrun.c rather than relying on implicit includes via other sim headers. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-24 05:38:43 +00:00
2012-03-24 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, config.in, configure: Regenerate.
sim: generate build dependencies on the fly Lift the code that GDB is using to generate dependencies on the fly and port it over to the sim. Now people shouldn't have to manually maintain these in their Makefile's. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-03 18:23:51 +00:00
2011-12-03 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4: New file.
* configure: Regenerate.
sim: dv-cfi: check for log2 support in libm when enabled The dv-cfi model uses log2() internally, so make sure we automatically link in libm when required. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-19 21:28:27 +00:00
2011-10-19 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate after common/acinclude.m4 update.
sim: rename common/aclocal.m4 to common/acinclude.m4 Automake likes to dump macros automatically used into the aclocal.m4 file, but the common/aclocal.m4 naming prevents that. So rename it to the more normal "acinclude.m4" so the aclocal tool can work. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-18 00:31:00 +00:00
2011-10-17 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Change include to common/acinclude.m4.
sim: move from common.m4 to SIM_AC_COMMON Now that the sourceware tree generally requires autoconf-2.64, update the sim tree to require that too. This allows us to drop the long standing SIM_AC_COMMON/common.m4 workaround as autoconf 2.64+ seems to work for me. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-18 00:17:24 +00:00
2011-10-17 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
call. Replace common.m4 include with SIM_AC_COMMON.
* configure: Regenerate.
sim: start a unified sim_do_command Since sim_do_command for many people simply calls sim_args_command, start a unified version of it. For people who handle their own options, they could switch to this by using sim_add_option_table instead. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-05 19:06:38 +00:00
2011-07-05 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_do_command): Delete.
Regenerate cgen-derived files.
2010-02-12 02:44:26 +00:00
2010-02-11 Doug Evans <dje@sebabeach.org>
* cpu.h, * decode.c, * model.c, * sem-switch.c, * sem.c: Regenerate.
Sync Libtool from GCC. /: * libtool.m4: Sync from git Libtool. * ltmain.sh: Likewise. * ltoptions.m4: Likewise. * ltversion.m4: Likewise. * lt~obsolete.m4: Likewise. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/: * avr/configure: Regenerate. * cris/configure: Regenerate. * microblaze/configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate. gprof/: * Makefile.in: Regenerate. * configure: Regenerate. opcodes/: * Makefile.in: Regenerate. * configure: Regenerate. gas/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. ld/: * configure: Regenerate. gdb/testsuite/: * gdb.cell/configure: Regenerate. binutils/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. bfd/: * Makefile.in: Regenerate. * configure: Regenerate. bfd/doc/: * Makefile.in: Regenerate.
2010-01-09 21:11:44 +00:00
2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* configure: Regenerate.
* cpu.h: Regenerate. * decode.c: Regenerate.
2010-01-06 05:10:53 +00:00
2010-01-05 Doug Evans <dje@sebabeach.org>
* cpu.h: Regenerate.
* decode.c: Regenerate.
Regenerate cgen files, update copyright year.
2010-01-02 19:09:21 +00:00
2010-01-02 Doug Evans <dje@sebabeach.org>
* arch.c, * arch.h, * cpu.c, * cpu.h, * cpuall.h, * decode.c,
* decode.h, * model.c, * sem-switch.c, * sem.c: Regenerate, update
copyright year.
* cgen-engine.h (EXTRACT_MSB0_LGSINT, EXTRACT_MSB0_LGUINT): Define. (EXTRACT_LSB0_LGSINT, EXTRACT_LSB0_LGUINT): Define. (EXTRACT_FN, SEMANTIC_FN): Use CGEN_INSN_WORD in prototype instead of CGEN_INSN_INT. plus, cgen files: Regenerate.
2009-11-23 04:12:17 +00:00
2009-11-22 Doug Evans <dje@sebabeach.org>
* cpu.h: Regenerate.
* cpuall.h: Regenerate.
* decode.c: Regenerate.
* decode.h: Regenerate.
* arch.c: Regenerate. * arch.h: Regenerate. * cpu.c: Regenerate. * cpu.h: Regenerate. * cpuall.h: Regenerate. * decode.c: Regenerate. * decode.h: Regenerate. * model.c: Regenerate. * sem-switch.c: Regenerate. * sem.c: Regenerate.
2009-11-04 05:42:21 +00:00
2009-11-03 Doug Evans <dje@sebabeach.org>
* arch.c: Regenerate.
* arch.h: Regenerate.
* cpu.c: Regenerate.
* cpu.h: Regenerate.
* cpuall.h: Regenerate.
* decode.c: Regenerate.
* decode.h: Regenerate.
* model.c: Regenerate.
* sem-switch.c: Regenerate.
* sem.c: Regenerate.
* Makefile.in (stamp-arch): Update path to lm32.cpu. (stamp-cpu): Ditto.
2009-10-28 04:24:44 +00:00
2009-10-27 Doug Evans <dje@sebabeach.org>
* Makefile.in (stamp-arch): Update path to lm32.cpu.
(stamp-cpu): Ditto.
Fixup readline and sim including of override.m4 readline/examples/rlfe/: * configure.in: m4_include toplevel config/override.m4. * configure: Regenerate. readline/ChangeLog.gdb: * configure.in: m4_include toplevel config/override.m4. * configure: Regenerate. sim/: * configure.ac: m4_include toplevel config/override.m4. * configure: Regenerate. * avr/configure: Regenerate. * cris/configure: Regenerate. sim/common/: * aclocal.m4: m4_include toplevel config/override.m4. * configure: Regenerate. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/igen/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/ppc/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate.
2009-08-22 11:36:40 +00:00
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Regenerate tree using Autoconf 2.64 and Automake 1.11. config/: * override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64. /: * configure: Regenerate. etc/: * configure: Regenerate. sim/common/: * config.in: Regenerate. * configure: Likewise. sim/iq2000/: * config.in: Regenerate. * configure: Likewise. sim/d10v/: * config.in: Regenerate. * configure: Likewise. sim/igen/: * config.in: Regenerate. * configure: Likewise. sim/m32r/: * config.in: Regenerate. * configure: Likewise. sim/frv/: * config.in: Regenerate. * configure: Likewise. sim/: * avr/config.in: Regenerate. * avr/configure: Likewise. * configure: Likewise. * cris/config.in: Likewise. * cris/configure: Likewise. sim/h8300/: * config.in: Regenerate. * configure: Likewise. sim/mn10300/: * config.in: Regenerate. * configure: Likewise. sim/ppc/: * config.in: Regenerate. * configure: Likewise. sim/erc32/: * config.in: Regenerate. * configure: Likewise. sim/arm/: * config.in: Regenerate. * configure: Likewise. sim/m68hc11/: * config.in: Regenerate. * configure: Likewise. sim/lm32/: * config.in: Regenerate. * configure: Likewise. sim/sh64/: * config.in: Regenerate. * configure: Likewise. sim/v850/: * config.in: Regenerate. * configure: Likewise. sim/cr16/: * config.in: Regenerate. * configure: Likewise. sim/moxie/: * config.in: Regenerate. * configure: Likewise. sim/m32c/: * config.in: Regenerate. * configure: Likewise. sim/mips/: * config.in: Regenerate. * configure: Likewise. sim/mcore/: * config.in: Regenerate. * configure: Likewise. sim/testsuite/d10v-elf/: * configure: Regenerate. sim/testsuite/: * configure: Regenerate. sim/testsuite/frv-elf/: * configure: Regenerate. sim/testsuite/m32r-elf/: * configure: Regenerate. sim/testsuite/mips64el-elf/: * configure: Regenerate. sim/sh/: * config.in: Regenerate. * configure: Likewise. gold/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * testsuite/Makefile.in: Likewise. gprof/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * configure: Likewise. * gconfig.in: Likewise. opcodes/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gas/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. ld/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gdb/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. * gnulib/Makefile.in: Likewise. gdb/doc/: * configure: Regenerate. gdb/gdbserver/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. gdb/testsuite/: * configure: Regenerate. * gdb.hp/configure: Likewise. * gdb.hp/gdb.aCC/configure: Likewise. * gdb.hp/gdb.base-hp/configure: Likewise. * gdb.hp/gdb.compat/configure: Likewise. * gdb.hp/gdb.defects/configure: Likewise. * gdb.hp/gdb.objdbg/configure: Likewise. * gdb.stabs/configure: Likewise. binutils/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. bfd/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. bfd/doc/: * Makefile.in: Regenerate. readline/: * configure: Regenerate. readline/examples/rlfe/: * configure: Regenerate.
2009-08-22 16:56:56 +00:00
* config.in: Regenerate.
* configure: Likewise.
Fixup readline and sim including of override.m4 readline/examples/rlfe/: * configure.in: m4_include toplevel config/override.m4. * configure: Regenerate. readline/ChangeLog.gdb: * configure.in: m4_include toplevel config/override.m4. * configure: Regenerate. sim/: * configure.ac: m4_include toplevel config/override.m4. * configure: Regenerate. * avr/configure: Regenerate. * cris/configure: Regenerate. sim/common/: * aclocal.m4: m4_include toplevel config/override.m4. * configure: Regenerate. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/igen/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/ppc/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate.
2009-08-22 11:36:40 +00:00
* configure: Regenerate.
* Makefile.in (traps.o): Add dependency on targ-vals.h to fix parallel makes.
2009-07-08 06:16:46 +00:00
2009-07-07 Doug Evans <dje@sebabeach.org>
* Makefile.in (traps.o): Add dependency on targ-vals.h to fix
parallel makes.
Add ChangeLog
2009-05-18 13:27:12 +00:00
2009-05-18 Jon Beniston <jon@beniston.com>
Remove leading/trailing white spaces in ChangeLog
2015-07-24 04:08:12 -07:00
* Makefile.in: New file.
* arch.c: New file.
* arch.h: New file.
* config.in: New file.
* configure: New file.
* configure.ac: New file.
* cpu.c: New file.
* cpu.h: New file.
* cpuall.h: New file.
* decode.c: New file.
* decode.h: New file.
* dv-lm32cpu.c: New file.
* dv-lm32timer.c: New file.
* dv-lm32uart.c: New file.
* lm32.c: New file.
* lm32-sim.h: New file.
* mloop.in: New file.
* model.c: New file.
* sem.c: New file.
* sem-switch.c: New file.
* sim-if.c: New file.
* sim-main.c: New file.
* tconfig.in: New file.
* traps.c: New file.
* user.c: New file.
Reference in New Issue Copy Permalink