yggdrasil/binutils-gdb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[gdb] Fix more typos in comments (2)

Browse Source 
Fix typos in comments.  NFC.

Tested on x86_64-linux.

gdb/ChangeLog:

2019-10-26  Tom de Vries  <tdevries@suse.de>

	* aarch64-linux-tdep.c: Fix typos in comments.
	* aarch64-tdep.c: Same.
	* ada-lang.c: Same.
	* amd64-nat.c: Same.
	* arc-tdep.c: Same.
	* arch/aarch64-insn.c: Same.
	* block.c: Same.
	* breakpoint.h: Same.
	* btrace.h: Same.
	* c-varobj.c: Same.
	* cli/cli-decode.c: Same.
	* cli/cli-script.c: Same.
	* cli/cli-utils.h: Same.
	* coff-pe-read.c: Same.
	* coffread.c: Same.
	* compile/compile-cplus-symbols.c: Same.
	* compile/compile-object-run.c: Same.
	* completer.c: Same.
	* corelow.c: Same.
	* cp-support.c: Same.
	* demangle.c: Same.
	* dwarf-index-write.c: Same.
	* dwarf2-frame.c: Same.
	* dwarf2-frame.h: Same.
	* eval.c: Same.
	* frame-base.h: Same.
	* frame.h: Same.
	* gdbcmd.h: Same.
	* gdbtypes.h: Same.
	* gnu-nat.c: Same.
	* guile/scm-objfile.c: Same.
	* i386-tdep.c: Same.
	* i386-tdep.h: Same.
	* infcall.c: Same.
	* infcall.h: Same.
	* linux-nat.c: Same.
	* m68k-tdep.c: Same.
	* macroexp.c: Same.
	* memattr.c: Same.
	* mi/mi-cmd-disas.c: Same.
	* mi/mi-getopt.h: Same.
	* mi/mi-main.c: Same.
	* minsyms.c: Same.
	* nat/aarch64-sve-linux-sigcontext.h: Same.
	* objfiles.h: Same.
	* ppc-linux-nat.c: Same.
	* ppc-linux-tdep.c: Same.
	* ppc-tdep.h: Same.
	* progspace.h: Same.
	* prologue-value.h: Same.
	* python/py-evtregistry.c: Same.
	* python/py-instruction.h: Same.
	* record-btrace.c: Same.
	* record-full.c: Same.
	* remote.c: Same.
	* rs6000-tdep.c: Same.
	* ser-tcp.c: Same.
	* sol-thread.c: Same.
	* sparc-sol2-tdep.c: Same.
	* sparc64-tdep.c: Same.
	* stabsread.c: Same.
	* symfile.c: Same.
	* symtab.h: Same.
	* target.c: Same.
	* tracepoint.c: Same.
	* tui/tui-data.h: Same.
	* tui/tui-io.c: Same.
	* tui/tui-win.c: Same.
	* tui/tui.c: Same.
	* unittests/rsp-low-selftests.c: Same.
	* user-regs.h: Same.
	* utils.c: Same.
	* utils.h: Same.
	* valarith.c: Same.
	* valops.c: Same.
	* valprint.c: Same.
	* valprint.h: Same.
	* value.c: Same.
	* value.h: Same.
	* varobj.c: Same.
	* x86-nat.h: Same.
	* xtensa-tdep.c: Same.

gdb/gdbserver/ChangeLog:

2019-10-26  Tom de Vries  <tdevries@suse.de>

	* linux-aarch64-low.c: Fix typos in comments.
	* linux-arm-low.c: Same.
	* linux-low.c: Same.
	* linux-ppc-low.c: Same.
	* proc-service.c: Same.
	* regcache.h: Same.
	* server.c: Same.
	* tracepoint.c: Same.
	* win32-low.c: Same.

gdb/stubs/ChangeLog:

2019-10-26  Tom de Vries  <tdevries@suse.de>

	* ia64vms-stub.c: Fix typos in comments.
	* m32r-stub.c: Same.
	* m68k-stub.c: Same.
	* sh-stub.c: Same.

gdb/testsuite/ChangeLog:

2019-10-26  Tom de Vries  <tdevries@suse.de>

	* gdb.base/bigcore.c: Fix typos in comments.
	* gdb.base/ctf-ptype.c: Same.
	* gdb.base/long_long.c: Same.
	* gdb.dwarf2/dw2-op-out-param.S: Same.
	* gdb.python/py-evthreads.c: Same.
	* gdb.reverse/i387-stack-reverse.c: Same.
	* gdb.trace/tfile.c: Same.
	* lib/compiler.c: Same.
	* lib/compiler.cc: Same.

Change-Id: I8573d84a577894270179ae30f46c48d806fc1beb
This commit is contained in:
Tom de Vries 2019-10-26 09:55:32 +02:00
parent 1cc3da765d
commit 30baf67b65
108 changed files with 240 additions and 124 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

85
gdb/ChangeLog
View File

@ -1,3 +1,88 @@
2019-10-26 Tom de Vries <tdevries@suse.de>
* aarch64-linux-tdep.c: Fix typos in comments.
* aarch64-tdep.c: Same.
* ada-lang.c: Same.
* amd64-nat.c: Same.
* arc-tdep.c: Same.
* arch/aarch64-insn.c: Same.
* block.c: Same.
* breakpoint.h: Same.
* btrace.h: Same.
* c-varobj.c: Same.
* cli/cli-decode.c: Same.
* cli/cli-script.c: Same.
* cli/cli-utils.h: Same.
* coff-pe-read.c: Same.
* coffread.c: Same.
* compile/compile-cplus-symbols.c: Same.
* compile/compile-object-run.c: Same.
* completer.c: Same.
* corelow.c: Same.
* cp-support.c: Same.
* demangle.c: Same.
* dwarf-index-write.c: Same.
* dwarf2-frame.c: Same.
* dwarf2-frame.h: Same.
* eval.c: Same.
* frame-base.h: Same.
* frame.h: Same.
* gdbcmd.h: Same.
* gdbtypes.h: Same.
* gnu-nat.c: Same.
* guile/scm-objfile.c: Same.
* i386-tdep.c: Same.
* i386-tdep.h: Same.
* infcall.c: Same.
* infcall.h: Same.
* linux-nat.c: Same.
* m68k-tdep.c: Same.
* macroexp.c: Same.
* memattr.c: Same.
* mi/mi-cmd-disas.c: Same.
* mi/mi-getopt.h: Same.
* mi/mi-main.c: Same.
* minsyms.c: Same.
* nat/aarch64-sve-linux-sigcontext.h: Same.
* objfiles.h: Same.
* ppc-linux-nat.c: Same.
* ppc-linux-tdep.c: Same.
* ppc-tdep.h: Same.
* progspace.h: Same.
* prologue-value.h: Same.
* python/py-evtregistry.c: Same.
* python/py-instruction.h: Same.
* record-btrace.c: Same.
* record-full.c: Same.
* remote.c: Same.
* rs6000-tdep.c: Same.
* ser-tcp.c: Same.
* sol-thread.c: Same.
* sparc-sol2-tdep.c: Same.
* sparc64-tdep.c: Same.
* stabsread.c: Same.
* symfile.c: Same.
* symtab.h: Same.
* target.c: Same.
* tracepoint.c: Same.
* tui/tui-data.h: Same.
* tui/tui-io.c: Same.
* tui/tui-win.c: Same.
* tui/tui.c: Same.
* unittests/rsp-low-selftests.c: Same.
* user-regs.h: Same.
* utils.c: Same.
* utils.h: Same.
* valarith.c: Same.
* valops.c: Same.
* valprint.c: Same.
* valprint.h: Same.
* value.c: Same.
* value.h: Same.
* varobj.c: Same.
* x86-nat.h: Same.
* xtensa-tdep.c: Same.
2019-10-25 Ali Tamur <tamur@google.com>
* charset.c (find_charset_names): Reflect API change.

2
gdb/aarch64-linux-tdep.c
View File

@ -1347,7 +1347,7 @@ aarch64_linux_get_syscall_number (struct gdbarch *gdbarch, thread_info *thread)
This function will only ever get called when stopped at the entry or exit
of a syscall, so by checking for 0 in x0 (arg0/retval), x1 (arg1), x8
(syscall), x29 (FP) and x30 (LR) we can infer:
1) Either inferior is at exit from sucessful execve.
1) Either inferior is at exit from successful execve.
2) Or inferior is at entry to a call to io_setup with invalid arguments and
a corrupted FP and LR.
It should be safe enough to assume case 1. */

2
gdb/aarch64-tdep.c
View File

@ -1414,7 +1414,7 @@ struct aarch64_call_info
};
/* Pass a value in a sequence of consecutive X registers. The caller
is responsbile for ensuring sufficient registers are available. */
is responsible for ensuring sufficient registers are available. */
static void
pass_in_x (struct gdbarch *gdbarch, struct regcache *regcache,

4
gdb/ada-lang.c
View File

@ -6443,7 +6443,7 @@ ada_is_ignored_field (struct type *type, int field_num)
/* Anonymous field names should not be printed.
brobecker/2007-02-20: I don't think this can actually happen
but we don't want to print the value of annonymous fields anyway. */
but we don't want to print the value of anonymous fields anyway. */
if (name == NULL)
return 1;
@ -10117,7 +10117,7 @@ ada_value_cast (struct type *type, struct value *arg2)
information nor the associated type structure in GDB are able to
express such dynamic types. So what the debugger does is to create
"fixed" versions of the type that applies to the specific object.
We also informally refer to this opperation as "fixing" an object,
We also informally refer to this operation as "fixing" an object,
which means creating its associated fixed type.
Example: when printing the value of variable "Yes" above, its fixed

2
gdb/amd64-nat.c
View File

@ -34,7 +34,7 @@
register set indexed by register number, and the number of
registers supported by the mapping. We don't need mappings for the
floating-point and SSE registers, since the difference between
64-bit and 32-bit variants are negligable. The difference in the
64-bit and 32-bit variants are negligible. The difference in the
number of SSE registers is already handled by the target code. */
/* General-purpose register mapping for native 32-bit code. */

4
gdb/arc-tdep.c
View File

@ -969,7 +969,7 @@ arc_is_in_prologue (struct gdbarch *gdbarch, const struct arc_instruction &insn,
/* Store of some register. May or may not update base address register. */
if (insn.insn_class == STORE || insn.insn_class == PUSH)
{
/* There is definetely at least one operand - register/value being
/* There is definitely at least one operand - register/value being
stored. */
gdb_assert (insn.operands_count > 0);
@ -1886,7 +1886,7 @@ arc_tdesc_init (struct gdbarch_info info, const struct target_desc **tdesc,
}
}
/* Mandatory AUX registeres are intentionally few and are common between
/* Mandatory AUX registers are intentionally few and are common between
ARCompact and ARC v2, so same code can be used for both. */
feature = tdesc_find_feature (tdesc_loc, aux_minimal_feature_name);
if (feature == NULL)

2
gdb/arch/aarch64-insn.c
View File

@ -47,7 +47,7 @@ extract_signed_bitfield (uint32_t insn, unsigned width, unsigned offset)
INSN is the instruction opcode.
MASK specifies the bits within the opcode that are to be tested
agsinst for a match with PATTERN. */
against for a match with PATTERN. */
static int
decode_masked_match (uint32_t insn, uint32_t mask, uint32_t pattern)

2
gdb/block.c
View File

@ -343,7 +343,7 @@ block_set_using (struct block *block,
}
/* If BLOCK_NAMESPACE (block) is NULL, allocate it via OBSTACK and
ititialize its members to zero. */
initialize its members to zero. */
static void
block_initialize_namespace (struct block *block, struct obstack *obstack)

4
gdb/breakpoint.h
View File

@ -375,7 +375,7 @@ public:
agent_expr_up cmd_bytecode;
/* Signals that breakpoint conditions and/or commands need to be
re-synched with the target. This has no use other than
re-synced with the target. This has no use other than
target-side breakpoints. */
bool needs_update = false;
@ -672,7 +672,7 @@ enum watchpoint_triggered
/* Some targets (e.g., embedded PowerPC) need two debug registers to set
a watchpoint over a memory region. If this flag is true, GDB will use
only one register per watchpoint, thus assuming that all acesses that
only one register per watchpoint, thus assuming that all accesses that
modify a memory location happen at its starting address. */
extern bool target_exact_watchpoints;

2
gdb/btrace.h
View File

@ -445,7 +445,7 @@ extern int btrace_find_insn_by_number (struct btrace_insn_iterator *,
unsigned int number);
/* Dereference a branch trace call iterator. Return a pointer to the
function the iterator points to or NULL if the interator points past
function the iterator points to or NULL if the iterator points past
the end of the branch trace. */
extern const struct btrace_function *
btrace_call_get (const struct btrace_call_iterator *);

4
gdb/c-varobj.c
View File

@ -82,7 +82,7 @@ adjust_value_for_child_access (struct value **value,
/* Pointers to structures are treated just like
structures when accessing children. Don't
dererences pointers to other types. */
dereference pointers to other types. */
if (TYPE_CODE (*type) == TYPE_CODE_PTR)
{
struct type *target_type = get_target_type (*type);
@ -765,7 +765,7 @@ cplus_describe_child (const struct varobj *parent, int index,
--type_index;
/* If the type is anonymous and the field has no name,
set an appopriate name. */
set an appropriate name. */
field_name = TYPE_FIELD_NAME (type, type_index);
if (field_name == NULL || *field_name == '\0')
{

4
gdb/cli/cli-decode.c
View File

@ -1038,7 +1038,7 @@ apropos_cmd (struct ui_file *stream,
command that requires subcommands. Also called by saying just
"help".)
I am going to split this into two seperate comamnds, help_cmd and
I am going to split this into two separate commands, help_cmd and
help_list. */
void
@ -1570,7 +1570,7 @@ undef_cmd_error (const char *cmdtype, const char *q)
unless ALLOW_UNKNOWN is negative.
CMDTYPE precedes the word "command" in the error message.
If INGNORE_HELP_CLASSES is nonzero, ignore any command list
If IGNORE_HELP_CLASSES is nonzero, ignore any command list
elements which are actually help classes rather than commands (i.e.
the function field of the struct cmd_list_element is 0). */

2
gdb/cli/cli-script.c
View File

@ -251,7 +251,7 @@ print_command_lines (struct ui_out *uiout, struct command_line *cmd,
}
/* An if command. Recursively print both arms before
continueing. */
continuing. */
if (list->control_type == if_control)
{
uiout->field_fmt (NULL, "if %s", list->line);

2
gdb/cli/cli-utils.h
View File

@ -56,7 +56,7 @@ extern void report_unrecognized_option_error (const char *command,
/* Builds the help string for a command documented by PREFIX,
followed by the extract_info_print_args help for ENTITY_KIND. If
DOCUMENT_N_FLAG is true then help text descibing the -n flag is also
DOCUMENT_N_FLAG is true then help text describing the -n flag is also
included. */
const char *info_print_args_help (const char *prefix,

2
gdb/coff-pe-read.c
View File

@ -614,7 +614,7 @@ read_pe_exported_syms (minimal_symbol_reader &reader,
/* Extract from ABFD the offset of the .text section.
This offset is mainly related to the offset within the file.
The value was previously expected to be 0x1000 for all files,
but some Windows OS core DLLs seem to use 0x10000 section alignement
but some Windows OS core DLLs seem to use 0x10000 section alignment
which modified the return value of that function.
Still return default 0x1000 value if ABFD is NULL or
if '.text' section is not found, but that should not happen... */

2
gdb/coffread.c
View File

@ -456,7 +456,7 @@ record_minimal_symbol (minimal_symbol_reader &reader,
{
/* Because the value of these symbols is within a function code
range, these symbols interfere with the symbol-from-address
reverse lookup; this manifests itselfs in backtraces, or any
reverse lookup; this manifests itself in backtraces, or any
other commands that prints symbolic addresses. Just pretend
these symbols do not exist. */
return NULL;

2
gdb/compile/compile-cplus-symbols.c
View File

@ -194,7 +194,7 @@ convert_one_symbol (compile_cplus_instance *instance,
if (scope.nested_type () != GCC_TYPE_NONE)
{
/* We found a symbol for this type that was defined inside
some other symbol, e.g., a class tyepdef defined. */
some other symbol, e.g., a class typedef defined. */
return;
}

2
gdb/compile/compile-object-run.c
View File

@ -77,7 +77,7 @@ do_module_cleanup (void *arg, int registers_valid)
addr_value = value_from_pointer (ptr_type, data->out_value_addr);
/* SCOPE_DATA would be stale unlesse EXECUTEDP != NULL. */
/* SCOPE_DATA would be stale unless EXECUTEDP != NULL. */
compile_print_value (value_ind (addr_value), data->scope_data);
}
}

2
gdb/completer.c
View File

@ -865,7 +865,7 @@ complete_explicit_location (completion_tracker &tracker,
else if (quoted_arg_end[1] == ' ')
{
/* We're maybe past the explicit location argument.
Skip the argument without interpretion, assuming the
Skip the argument without interpretation, assuming the
user may want to create pending breakpoint. Offer
the keyword and explicit location options as possible
completions. */

2
gdb/corelow.c
View File

@ -330,7 +330,7 @@ maybe_say_no_core_file_now (int from_tty)
printf_filtered (_("No core file now.\n"));
}
/* Backward compatability with old way of specifying core files. */
/* Backward compatibility with old way of specifying core files. */
void
core_file_command (const char *filename, int from_tty)

2
gdb/cp-support.c
View File

@ -985,7 +985,7 @@ cp_find_first_component_aux (const char *name, int permissive)
/* Operator names can show up in unexpected places. Since these can
contain parentheses or angle brackets, they can screw up the
recursion. But not every string 'operator' is part of an
operater name: e.g. you could have a variable 'cooperator'. So
operator name: e.g. you could have a variable 'cooperator'. So
this variable tells us whether or not we should treat the string
'operator' as starting an operator. */
int operator_possible = 1;

2
gdb/demangle.c
View File

@ -75,7 +75,7 @@ show_asm_demangle (struct ui_file *file, int from_tty,
static const char *current_demangling_style_string;
/* The array of names of the known demanglyng styles. Generated by
/* The array of names of the known demangling styles. Generated by
_initialize_demangler from libiberty_demanglers[] array. */
static const char **demangling_style_names;

2
gdb/dwarf-index-write.c
View File

@ -951,7 +951,7 @@ private:
{
public:
/* Object costructor to be called for current DWARF2_PER_OBJFILE.
/* Object constructor to be called for current DWARF2_PER_OBJFILE.
All .debug_str section strings are automatically stored. */
debug_str_lookup (struct dwarf2_per_objfile *dwarf2_per_objfile)
: m_abfd (dwarf2_per_objfile->objfile->obfd),

2
gdb/dwarf2-frame.c
View File

@ -1343,7 +1343,7 @@ dwarf2_frame_sniffer (const struct frame_unwind *self,
if (!dwarf2_frame_unwinders_enabled_p)
return 0;
/* Grab an address that is guarenteed to reside somewhere within the
/* Grab an address that is guaranteed to reside somewhere within the
function. get_frame_pc(), with a no-return next function, can
end up returning something past the end of this function's body.
If the frame we're sniffing for is a signal frame whose start

2
gdb/dwarf2-frame.h
View File

@ -41,7 +41,7 @@ enum dwarf2_frame_reg_rule
DWARF2_FRAME_REG_UNSPECIFIED = 0,
/* The term "undefined" comes from the DWARF2 CFI spec which this
code is moddeling; it indicates that the register's value is
code is modeling; it indicates that the register's value is
"undefined". GCC uses the less formal term "unsaved". Its
definition is a combination of REG_UNDEFINED and REG_UNSPECIFIED.
The failure to differentiate the two helps explain a few problems

2
gdb/eval.c
View File

@ -342,7 +342,7 @@ evaluate_struct_tuple (struct value *struct_val,
/* Recursive helper function for setting elements of array tuples.
The target is ARRAY (which has bounds LOW_BOUND to HIGH_BOUND); the
element value is ELEMENT; EXP, POS and NOSIDE are as usual.
Evaluates index expresions and sets the specified element(s) of
Evaluates index expressions and sets the specified element(s) of
ARRAY to ELEMENT. Returns last index value. */
static LONGEST

2
gdb/frame-base.h
View File

@ -36,7 +36,7 @@ struct regcache;
debug info. It is assumed that dwarf2, stabs, ... will each
provide their own methods.
A typical implmentation will return the same value for base,
A typical implementation will return the same value for base,
locals-base and args-base. That value, however, will likely be
different to the frame ID's stack address. */

2
gdb/frame.h
View File

@ -21,7 +21,7 @@
#define FRAME_H 1
/* The following is the intended naming schema for frame functions.
It isn't 100% consistent, but it is aproaching that. Frame naming
It isn't 100% consistent, but it is approaching that. Frame naming
schema:
Prefixes:

2
gdb/gdbcmd.h
View File

@ -2,7 +2,7 @@
of the possible command languages. If necessary, a hook (that may be
present or not) must be used and set to the appropriate routine by any
command language that cares about it. If you are having to include this
file you are possibly doing things the old way. This file will disapear.
file you are possibly doing things the old way. This file will dissapear.
fnasser@redhat.com */
/* Header file for GDB-specific command-line stuff.

12
gdb/gdbserver/ChangeLog
View File

@ -1,3 +1,15 @@
2019-10-26 Tom de Vries <tdevries@suse.de>
* linux-aarch64-low.c: Fix typos in comments.
* linux-arm-low.c: Same.
* linux-low.c: Same.
* linux-ppc-low.c: Same.
* proc-service.c: Same.
* regcache.h: Same.
* server.c: Same.
* tracepoint.c: Same.
* win32-low.c: Same.
2019-10-25 Tom Tromey <tromey@adacore.com>
* utils.c (xstrdup): Remove.

6
gdb/gdbserver/linux-aarch64-low.c
View File

@ -1948,7 +1948,7 @@ aarch64_install_fast_tracepoint_jump_pad (CORE_ADDR tpoint,
for (i = 30; i >= 0; i -= 2)
p += emit_stp_q_offset (p, i, i + 1, sp, i * 16);
/* Push general puspose registers on the stack. Note that we do not need
/* Push general purpose registers on the stack. Note that we do not need
to push x31 as it represents the xzr register and not the stack
pointer in a STR instruction.
@ -2116,7 +2116,7 @@ aarch64_install_fast_tracepoint_jump_pad (CORE_ADDR tpoint,
; This instruction is a normal store with memory ordering
; constraints. Thanks to this we do not have to put a data
; barrier instruction to make sure all data read and writes are done
; before this instruction is executed. Furthermore, this instrucion
; before this instruction is executed. Furthermore, this instruction
; will trigger an event, letting other threads know they can grab
; the lock.
STLR xzr, [x0]
@ -2311,7 +2311,7 @@ aarch64_emit_prologue (void)
the current stack pointer in the frame pointer. This way, it is not
clobbered when calling C functions.
Finally, throughtout every operation, we are using register x0 as the
Finally, throughout every operation, we are using register x0 as the
top of the stack, and x1 as a scratch register. */
p += emit_stp (p, x0, x1, sp, preindex_memory_operand (-2 * 16));

2
gdb/gdbserver/linux-arm-low.c
View File

@ -249,7 +249,7 @@ get_next_pcs_is_thumb (struct arm_get_next_pcs *self)
return arm_is_thumb_mode ();
}
/* Read memory from the inferiror.
/* Read memory from the inferior.
BYTE_ORDER is ignored and there to keep compatiblity with GDB's
read_memory_unsigned_integer. */
static ULONGEST

2
gdb/gdbserver/linux-low.c
View File

@ -1613,7 +1613,7 @@ linux_detach (process_info *process)
complete_ongoing_step_over ();
/* Stop all threads before detaching. First, ptrace requires that
the thread is stopped to sucessfully detach. Second, thread_db
the thread is stopped to successfully detach. Second, thread_db
may need to uninstall thread event breakpoints from memory, which
only works with a stopped process anyway. */
stop_all_lwps (0, NULL);

2
gdb/gdbserver/linux-ppc-low.c
View File

@ -1588,7 +1588,7 @@ ppc_install_fast_tracepoint_jump_pad (CORE_ADDR tpoint, CORE_ADDR tpaddr,
6. Restore SP
7. Build a jump for back to the program
8. Copy/relocate original instruction
9. Build a jump for replacing orignal instruction. */
9. Build a jump for replacing original instruction. */
/* Adjust stack pointer. */
if (is_64)

2
gdb/gdbserver/proc-service.c
View File

@ -21,7 +21,7 @@
#include "server.h"
/* This file is currently tied to GNU/Linux. It should scale well to
another libthread_db implementation, with the approriate gdbserver
another libthread_db implementation, with the appropriate gdbserver
hooks, but for now this means we can use GNU/Linux's target data. */
#include "linux-low.h"

2
gdb/gdbserver/regcache.h
View File

@ -42,7 +42,7 @@ struct regcache : public reg_buffer_common
int registers_owned = 0;
unsigned char *registers = nullptr;
#ifndef IN_PROCESS_AGENT
/* One of REG_UNAVAILBLE or REG_VALID. */
/* One of REG_UNAVAILABLE or REG_VALID. */
unsigned char *register_status = nullptr;
#endif

2
gdb/gdbserver/server.c
View File

@ -79,7 +79,7 @@ static bool exit_requested;
/* --once: Exit after the first connection has closed. */
bool run_once;
/* Whether to report TARGET_WAITKING_NO_RESUMED events. */
/* Whether to report TARGET_WAITKIND_NO_RESUMED events. */
static bool report_no_resumed;
bool non_stop;

6
gdb/gdbserver/tracepoint.c
View File

@ -1002,7 +1002,7 @@ EXTERN_C_POP
/* Control structure holding the read/write/etc. pointers into the
trace buffer. We need more than one of these to implement a
transaction-like mechanism to garantees that both GDBserver and the
transaction-like mechanism to guarantees that both GDBserver and the
in-process agent can try to change the trace buffer
simultaneously. */
@ -5154,7 +5154,7 @@ traceframe_walk_blocks (unsigned char *database, unsigned int datasize,
return NULL;
}
/* Look for the block of type TYPE_WANTED in the trameframe starting
/* Look for the block of type TYPE_WANTED in the traceframe starting
at DATABASE of DATASIZE bytes long. TFNUM is the traceframe
number. */
@ -6310,7 +6310,7 @@ download_trace_state_variables (void)
into GDBserver's trace buffer. This always uploads either all or
no trace frames. This is the counter part of
`trace_alloc_trace_buffer'. See its description of the atomic
synching mechanism. */
syncing mechanism. */
static void
upload_fast_traceframes (void)

4
gdb/gdbserver/win32-low.c
View File

@ -146,7 +146,7 @@ win32_set_thread_context (win32_thread_info *th)
will often not be true. In those cases, the context returned by
GetThreadContext will not be correct by the time the thread
stops, hence we can't set that context back into the thread when
resuming - it will most likelly crash the inferior.
resuming - it will most likely crash the inferior.
Unfortunately, there is no way to know when the thread will
really stop. To work around it, we'll only write the context
back to the thread when either the user or GDB explicitly change
@ -1426,7 +1426,7 @@ get_child_debug_event (struct target_waitstatus *ourstatus)
else
#endif
{
/* Keep the wait time low enough for confortable remote
/* Keep the wait time low enough for comfortable remote
interruption, but high enough so gdbserver doesn't become a
bottleneck. */
if (!WaitForDebugEvent (&current_event, 250))

2
gdb/gdbtypes.h
View File

@ -292,7 +292,7 @@ DEF_ENUM_FLAGS_TYPE (enum type_instance_flag_value, type_instance_flags);
#define TYPE_GNU_IFUNC(t) (TYPE_MAIN_TYPE (t)->flag_gnu_ifunc)
/* * Type owner. If TYPE_OBJFILE_OWNED is true, the type is owned by
the objfile retrieved as TYPE_OBJFILE. Otherweise, the type is
the objfile retrieved as TYPE_OBJFILE. Otherwise, the type is
owned by an architecture; TYPE_OBJFILE is NULL in this case. */
#define TYPE_OBJFILE_OWNED(t) (TYPE_MAIN_TYPE (t)->flag_objfile_owned)

2
gdb/gnu-nat.c
View File

@ -1731,7 +1731,7 @@ S_exception_raise_request (mach_port_t port, mach_port_t reply_port,
}
}
else
/* A supppressed exception, which ignore. */
/* A suppressed exception, which ignore. */
{
inf->wait.suppress = 1;
mach_port_deallocate (mach_task_self (), reply_port);

2
gdb/guile/scm-objfile.c
View File

@ -346,7 +346,7 @@ gdbscm_execute_objfile_script (const struct extension_language_defn *extlang,
ofscm_current_objfile = NULL;
}
/* (current-objfile) -> <gdb:obfjile>
/* (current-objfile) -> <gdb:objfile>
Return the current objfile, or #f if there isn't one.
Ideally this would be named ofscm_current_objfile, but that name is
taken by the variable recording the current objfile. */

2
gdb/i386-tdep.c
View File

@ -1622,7 +1622,7 @@ i386_analyze_frame_setup (struct gdbarch *gdbarch,
/* Check for some special instructions that might be migrated by
GCC into the prologue and skip them. At this point in the
prologue, code should only touch the scratch registers %eax,
%ecx and %edx, so while the number of posibilities is sheer,
%ecx and %edx, so while the number of possibilities is sheer,
it is limited.
Make sure we only skip these instructions if we later see the

2
gdb/i386-tdep.h
View File

@ -260,7 +260,7 @@ struct gdbarch_tdep
/* Floating-point registers. */
/* All FPU control regusters (except for FIOFF and FOOFF) are 16-bit
/* All FPU control registers (except for FIOFF and FOOFF) are 16-bit
(at most) in the FPU, but are zero-extended to 32 bits in GDB's
register cache. */

2
gdb/infcall.c
View File

@ -841,7 +841,7 @@ call_function_by_hand_dummy (struct value *function,
void parameterless generic dummy frame calls to frameless
functions will create a sequence of effectively identical
frames (SP, FP and TOS and PC the same). This, not
suprisingly, results in what appears to be a stack in an
surprisingly, results in what appears to be a stack in an
infinite loop --- when GDB tries to find a generic dummy
frame on the internal dummy frame stack, it will always
find the first one.

2
gdb/infcall.h
View File

@ -43,7 +43,7 @@ extern CORE_ADDR find_function_addr (struct value *function,
function returned. May fail to return, if a breakpoint or signal
is hit during the execution of the function.
DFEAULT_RETURN_TYPE is used as function return type if the return
DEFAULT_RETURN_TYPE is used as function return type if the return
type is unknown. This is used when calling functions with no debug
info.

4
gdb/linux-nat.c
View File

@ -1468,7 +1468,7 @@ linux_nat_target::detach (inferior *inf, int from_tty)
inferiors running. */
/* Stop all threads before detaching. ptrace requires that the
thread is stopped to sucessfully detach. */
thread is stopped to successfully detach. */
iterate_over_lwps (ptid_t (pid), stop_callback);
/* ... and wait until all of them have reported back that
they're no longer running. */
@ -3726,7 +3726,7 @@ linux_nat_target::kill ()
ptid_t ptid = ptid_t (inferior_ptid.pid ());
/* Stop all threads before killing them, since ptrace requires
that the thread is stopped to sucessfully PTRACE_KILL. */
that the thread is stopped to successfully PTRACE_KILL. */
iterate_over_lwps (ptid, stop_callback);
/* ... and wait until all of them have reported back that
they're no longer running. */

2
gdb/m68k-tdep.c
View File

@ -257,7 +257,7 @@ m68k_value_to_register (struct frame_info *frame, int regnum,
The 68020/030/040/060 do support an FPU, either as a coprocessor
(68881/2) or built-in (68040/68060). That's why System V release 4
(SVR4) instroduces a new calling convention specified by the SVR4
(SVR4) introduces a new calling convention specified by the SVR4
psABI. Integer values are returned in %d0/%d1, pointer return
values in %a0 and floating values in %fp0. When calling functions
returning a structure the caller should pass a pointer to a buffer

2
gdb/macroexp.c
View File

@ -1333,7 +1333,7 @@ expand (const char *id,
/* If the single token in SRC_FIRST followed by the tokens in SRC_REST
constitute a macro invokation not forbidden in NO_LOOP, append its
constitute a macro invocation not forbidden in NO_LOOP, append its
expansion to DEST and return non-zero. Otherwise, return zero, and
leave DEST unchanged.

2
gdb/memattr.c
View File

@ -133,7 +133,7 @@ create_user_mem_region (CORE_ADDR lo, CORE_ADDR hi,
int ix = std::distance (user_mem_region_list.begin (), it);
/* Check for an overlapping memory region. We only need to check
in the vicinity - at most one before and one after the
in the vincinity - at most one before and one after the
insertion point. */
for (int i = ix - 1; i < ix + 1; i++)
{

2
gdb/mi/mi-cmd-disas.c
View File

@ -36,7 +36,7 @@
FILENAME: The name of the file where we want disassemble from.
LINE: The line around which we want to disassemble. It will
disassemble the function that contins that line.
disassemble the function that contains that line.
HOW_MANY: Number of disassembly lines to display. With source, it
is the number of disassembly lines only, not counting the source
lines.

2
gdb/mi/mi-getopt.h
View File

@ -58,7 +58,7 @@ extern int mi_getopt_allow_unknown (const char *prefix, int argc,
/* mi_valid_noargs determines if ARGC/ARGV are a valid set of
parameters to satisfy an MI function that is not supposed to
recieve any arguments.
receive any arguments.
An MI function that should not receive arguments can still be
passed parameters after the special option '--' such as below.

6
gdb/mi/mi-main.c
View File

@ -1234,12 +1234,12 @@ mi_cmd_data_evaluate_expression (const char *command, char **argv, int argc)
the ``x'' command.
WORD-SIZE: size of each ``word''; 1,2,4, or 8 bytes.
NR_ROW: Number of rows.
NR_COL: The number of colums (words per row).
NR_COL: The number of columns (words per row).
ASCHAR: (OPTIONAL) Append an ascii character dump to each row. Use
ASCHAR for unprintable characters.
Reads SIZE*NR_ROW*NR_COL bytes starting at ADDR from memory and
displayes them. Returns:
displays them. Returns:
{addr="...",rowN={wordN="..." ,... [,ascii="..."]}, ...}
@ -1359,7 +1359,7 @@ mi_cmd_data_read_memory (const char *command, char **argv, int argc)
uiout->field_core_addr ("next-page", gdbarch, addr + total_bytes);
uiout->field_core_addr ("prev-page", gdbarch, addr - total_bytes);
/* Build the result as a two dimentional table. */
/* Build the result as a two dimensional table. */
{
int row;
int row_byte;

2
gdb/minsyms.c
View File

@ -737,7 +737,7 @@ lookup_minimal_symbol_by_pc_section (CORE_ADDR pc_in, struct obj_section *sectio
or equal to the desired pc value, we accomplish two things:
(1) the case where the pc value is larger than any minimal
symbol address is trivially solved, (2) the address associated
with the hi index is always the one we want when the interation
with the hi index is always the one we want when the iteration
terminates. In essence, we are iterating the test interval
down until the pc value is pushed out of it from the high end.

2
gdb/nat/aarch64-sve-linux-sigcontext.h
View File

@ -133,7 +133,7 @@ struct sve_context {
struct user_sve_header {
__u32 size; /* total meaningful regset content in bytes */
__u32 max_size; /* maxmium possible size for this thread */
__u32 max_size; /* maximum possible size for this thread */
__u16 vl; /* current vector length */
__u16 max_vl; /* maximum possible vector length */
__u16 flags;

4
gdb/objfiles.h
View File

@ -69,8 +69,8 @@ struct partial_symbol;
testcase are broken for some targets. In this test the functions
are all implemented as part of one file and the testcase is not
necessarily linked with a start file (depending on the target).
What happens is, that the first frame is printed normaly and
following frames are treated as being inside the enttry file then.
What happens is, that the first frame is printed normally and
following frames are treated as being inside the entry file then.
This way, only the #0 frame is printed in the backtrace output.''
Ref "frame.c" "NOTE: vinschen/2003-04-01".

2
gdb/ppc-linux-nat.c
View File

@ -616,7 +616,7 @@ fetch_register (struct regcache *regcache, int tid, int regno)
if (altivec_register_p (gdbarch, regno))
{
/* If this is the first time through, or if it is not the first
time through, and we have comfirmed that there is kernel
time through, and we have confirmed that there is kernel
support for such a ptrace request, then go and fetch the
register. */
if (have_ptrace_getvrregs)

2
gdb/ppc-linux-tdep.c
View File

@ -150,7 +150,7 @@ static struct target_so_ops powerpc_so_ops;
Examine the PLT again. Note that the loading of the shared
library has initialized the PLT to code which loads a constant
(which I think is an index into the GOT) into r11 and then
branchs a short distance to the code which actually does the
branches a short distance to the code which actually does the
resolving.
(gdb) x/2i 0x100409d4

2
gdb/ppc-tdep.h
View File

@ -433,7 +433,7 @@ extern int ppc_process_record (struct gdbarch *gdbarch,
/* Instruction size. */
#define PPC_INSN_SIZE 4
/* Estimate for the maximum number of instrctions in a function epilogue. */
/* Estimate for the maximum number of instructions in a function epilogue. */
#define PPC_MAX_EPILOGUE_INSTRUCTIONS 52
#endif /* ppc-tdep.h */

2
gdb/progspace.h
View File

@ -140,7 +140,7 @@ struct program_space
typedef next_adapter<struct objfile> objfiles_range;
/* Return an iterarable object that can be used to iterate over all
/* Return an iterable object that can be used to iterate over all
objfiles. The basic use is in a foreach, like:
for (objfile *objf : pspace->objfiles ()) { ... } */

2
gdb/prologue-value.h
View File

@ -121,7 +121,7 @@ enum prologue_value_kind
understand and maintain. In the approach used here:
- It's easier to see that the analyzer is correct: you just see
whether the analyzer properly (albiet conservatively) simulates
whether the analyzer properly (albeit conservatively) simulates
the effect of each instruction.
- It's easier to extend the analyzer: you can add support for new

2
gdb/python/py-evtregistry.c
View File

@ -112,7 +112,7 @@ gdbpy_initialize_eventregistry (void)
(PyObject *) &eventregistry_object_type);
}
/* Retern the number of listeners currently connected to this
/* Return the number of listeners currently connected to this
registry. */
int

2
gdb/python/py-instruction.h
View File

@ -24,7 +24,7 @@
/* Python type object for the abstract gdb.Instruction class. This class
contains getters for four elements: "pc" (int), "data" (buffer), "decode"
(str) and "size" (int) that must be overriden by sub classes. */
(str) and "size" (int) that must be overridden by sub classes. */
extern PyTypeObject py_insn_type;
#endif /* PYTHON_PY_INSTRUCTION_H */

2
gdb/record-btrace.c
View File

@ -1861,7 +1861,7 @@ record_btrace_frame_dealloc_cache (struct frame_info *self, void *this_cache)
}
/* btrace recording does not store previous memory content, neither the stack
frames content. Any unwinding would return errorneous results as the stack
frames content. Any unwinding would return erroneous results as the stack
contents no longer matches the changed PC value restored from history.
Therefore this unwinder reports any possibly unwound registers as
<unavailable>. */

2
gdb/record-full.c
View File

@ -53,7 +53,7 @@
mode, and we build up an execution log in which, for each executed
instruction, we record all changes in memory and register state.
This is invisible to the user, to whom it just looks like an
ordinary debugging session (except for performance degredation).
ordinary debugging session (except for performance degradation).
In replay mode, instead of actually letting the inferior run as a
process, we simulate its execution by playing back the recorded

2
gdb/remote.c
View File

@ -2829,7 +2829,7 @@ remote_target::thread_name (struct thread_info *info)
/* About these extended threadlist and threadinfo packets. They are
variable length packets but, the fields within them are often fixed
length. They are redundent enough to send over UDP as is the
length. They are redundant enough to send over UDP as is the
remote protocol in general. There is a matching unit test module
in libstub. */

2
gdb/rs6000-tdep.c
View File

@ -1360,7 +1360,7 @@ rs6000_skip_stack_check (struct gdbarch *gdbarch, const CORE_ADDR start_pc)
return pc;
}
/* Third sequence: No probe; instead, a comparizon between the stack size
/* Third sequence: No probe; instead, a comparison between the stack size
limit (saved in a run-time global variable) and the current stack
pointer:

2
gdb/ser-tcp.c
View File

@ -307,7 +307,7 @@ net_open (struct serial *scb, const char *name)
/* Flag to indicate whether we've got a connection refused. It will
be true if any of the connections tried was refused. */
bool got_connrefused;
/* If a connection succeeeds, SUCCESS_AINFO will point to the
/* If a connection succeeds, SUCCESS_AINFO will point to the
'struct addrinfo' that succeed. */
struct addrinfo *success_ainfo = NULL;
unsigned int polls = 0;

4
gdb/sol-thread.c
View File

@ -22,7 +22,7 @@
to provide access to the Solaris user-mode thread implementation.
Solaris threads are true user-mode threads, which are invoked via
the thr_* and pthread_* (native and POSIX respectivly) interfaces.
the thr_* and pthread_* (native and POSIX respectively) interfaces.
These are mostly implemented in user-space, with all thread context
kept in various structures that live in the user's heap. These
should not be confused with lightweight processes (LWPs), which are
@ -253,7 +253,7 @@ td_err_string (td_err_e errcode)
return buf;
}
/* Return the libthread_db state string assicoated with STATECODE.
/* Return the libthread_db state string associated with STATECODE.
If STATECODE is unknown, return an appropriate message. */
static const char *

2
gdb/sparc-sol2-tdep.c
View File

@ -239,7 +239,7 @@ sparc_sol2_static_transform_name (const char *name)
be incorrect in some places, at least for SPARC. The
globalization prefix is encoded into an N_OPT stab, with the form
"G=<prefix>". The globalization prefix always seems to start
with a dollar sign '$'; a dot '.' is used as a seperator. So we
with a dollar sign '$'; a dot '.' is used as a separator. So we
simply strip everything up until the last dot. */
if (name[0] == '$')

2
gdb/sparc64-tdep.c
View File

@ -1199,7 +1199,7 @@ sparc64_16_byte_align_p (struct type *type)
/* Store floating fields of element ELEMENT of an "parameter array"
that has type TYPE and is stored at BITPOS in VALBUF in the
apropriate registers of REGCACHE. This function can be called
appropriate registers of REGCACHE. This function can be called
recursively and therefore handles floating types in addition to
structures. */

2
gdb/stabsread.c
View File

@ -4548,7 +4548,7 @@ cleanup_undefined_types_1 (void)
undef_types_length = 0;
}
/* Try to fix all the undefined types we ecountered while processing
/* Try to fix all the undefined types we encountered while processing
this unit. */
void

7
gdb/stubs/ChangeLog
View File

@ -1,3 +1,10 @@
2019-10-26 Tom de Vries <tdevries@suse.de>
* ia64vms-stub.c: Fix typos in comments.
* m32r-stub.c: Same.
* m68k-stub.c: Same.
* sh-stub.c: Same.
2019-01-21 Tom Tromey <tom@tromey.com>
* ia64vms-stub.c: Fix includes.

4
gdb/stubs/ia64vms-stub.c
View File

@ -1924,7 +1924,7 @@ sock_write (const unsigned char *buf, int len)
}
}
/* Compute the cheksum and send the packet. */
/* Compute the checksum and send the packet. */
static void
send_pkt (void)
@ -2251,7 +2251,7 @@ excp_handler (struct chf$signal_array *sig,
/* Self protection. FIXME: Should be per thread ? */
static int in_handler = 0;
/* Completly ignore some conditions (signaled indirectly by this stub). */
/* Completely ignore some conditions (signaled indirectly by this stub). */
switch (code)
{
case LIB$_KEYNOTFOU & STS$M_COND_ID:

2
gdb/stubs/m32r-stub.c
View File

@ -542,7 +542,7 @@ handle_exception (int exceptionVector)
/* qCRC support */
/* Table used by the crc32 function to calcuate the checksum. */
/* Table used by the crc32 function to calculate the checksum. */
static unsigned long crc32_table[256] = { 0, 0 };
static unsigned long

2
gdb/stubs/m68k-stub.c
View File

@ -45,7 +45,7 @@
* program counter and status register onto the supervisor stack and then
* transfers execution to a location specified in it's vector table.
* The handlers for the exception vectors are hardwired to jmp to an address
* given by the relation: (exception - 256) * 6. These are decending
* given by the relation: (exception - 256) * 6. These are descending
* addresses starting from -6, -12, -18, ... By allowing 6 bytes for
* each entry, a jsr, jmp, bsr, ... can be used to enter the exception
* handler. Using a jsr to handle an exception has an added benefit of

4
gdb/stubs/sh-stub.c
View File

@ -111,7 +111,7 @@
r... = register contents
or... WAA The process exited, and AA is
the exit status. This is only
applicable for certains sorts of
applicable for certain sorts of
targets.
kill request k
@ -137,7 +137,7 @@
Responses can be run-length encoded to save space. A '*' means that
the next character is an ASCII encoding giving a repeat count which
stands for that many repititions of the character preceding the '*'.
stands for that many repetitions of the character preceding the '*'.
The encoding is n+29, yielding a printable character where n >=3
(which is where rle starts to win). Don't use an n > 126.

2
gdb/symfile.c
View File

@ -1044,7 +1044,7 @@ finish_new_objfile (struct objfile *objfile, symfile_add_flags add_flags)
For NAME description see the objfile constructor.
ADD_FLAGS encodes verbosity, whether this is main symbol file or
extra, such as dynamically loaded code, and what to do with breakpoins.
extra, such as dynamically loaded code, and what to do with breakpoints.
ADDRS is as described for syms_from_objfile_1, above.
ADDRS is ignored when SYMFILE_MAINLINE bit is set in ADD_FLAGS.

2
gdb/symtab.h
View File

@ -1044,7 +1044,7 @@ struct symbol_block_ops
register, the CFA as defined by DWARF unwinding information, ...
So this specific method is supposed to compute the frame base address such
as for nested fuctions, the static link computes the same address. For
as for nested functions, the static link computes the same address. For
instance, considering DWARF debugging information, the static link is
computed with DW_AT_static_link and this method must be used to compute
the corresponding DW_AT_frame_base attribute. */

2
gdb/target.c
View File

@ -140,7 +140,7 @@ static int show_memory_breakpoints = 0;
/* These globals control whether GDB attempts to perform these
operations; they are useful for targets that need to prevent
inadvertant disruption, such as in non-stop mode. */
inadvertent disruption, such as in non-stop mode. */
bool may_write_registers = true;

12
gdb/testsuite/ChangeLog
View File

@ -1,3 +1,15 @@
2019-10-26 Tom de Vries <tdevries@suse.de>
* gdb.base/bigcore.c: Fix typos in comments.
* gdb.base/ctf-ptype.c: Same.
* gdb.base/long_long.c: Same.
* gdb.dwarf2/dw2-op-out-param.S: Same.
* gdb.python/py-evthreads.c: Same.
* gdb.reverse/i387-stack-reverse.c: Same.
* gdb.trace/tfile.c: Same.
* lib/compiler.c: Same.
* lib/compiler.cc: Same.
2019-10-25 Tom de Vries <tdevries@suse.de>
* gdb.reverse/sigall-precsave.exp: Use -wrap and $gdb_test_name in

4
gdb/testsuite/gdb.base/bigcore.c
View File

@ -121,7 +121,7 @@ maximize_rlimit (int resource, const char *prefix)
print_string ("\n");
}
/* Maintain a doublely linked list. */
/* Maintain a doubly linked list. */
struct list
{
struct list *next;
@ -194,7 +194,7 @@ main ()
}
/* Compute an initial chunk size. The math is dodgy but it works
for the moment. Perhaphs there's a constant around somewhere.
for the moment. Perhaps there's a constant around somewhere.
Limit this to max_core_size bytes - no point in trying to
allocate more than can be written to the corefile. */
{

2
gdb/testsuite/gdb.base/ctf-ptype.c
View File

@ -17,7 +17,7 @@
/*
* Test file with lots of different types, for testing the
* "ptype" command on CTF data. It's devired from ptype.c.
* "ptype" command on CTF data. It's derived from ptype.c.
*/
/*

2
gdb/testsuite/gdb.base/long_long.c
View File

@ -80,7 +80,7 @@ int known_types()
int main() {
/* Pack Byte, Half, Word and Giant arrays with byte-orderd values.
/* Pack Byte, Half, Word and Giant arrays with byte-ordered values.
That way "(gdb) x" gives the same output on different
architectures. */
pack (b, 1, 2);

2
gdb/testsuite/gdb.dwarf2/dw2-op-out-param.S
View File

@ -28,7 +28,7 @@
like gdb to behave in a user friendly, and helpful way when presented
with such dwarf. */
/* There are 4 test cases in this assembler file. In each case funcion
/* There are 4 test cases in this assembler file. In each case function
main calls each test function in turn, each test case then calls the
breakpt function.

2
gdb/testsuite/gdb.python/py-evthreads.c
View File

@ -33,7 +33,7 @@ void* thread3 (void* d)
void* thread2 (void* d)
{
/* Do not quit thread3 asynchronously wrt thread2 stop - wait first on
thread3_id to stop. It would complicate testcase receiption of the
thread3_id to stop. It would complicate testcase reception of the
events. */
pthread_create (&thread3_id, NULL, thread3, NULL); pthread_join (thread3_id, NULL);

2
gdb/testsuite/gdb.reverse/i387-stack-reverse.c
View File

@ -14,7 +14,7 @@ void empty_fpu_stack()
"ffree %st(7)");
}
/* tests floating point arithmatic */
/* tests floating point arithmetic */
void test_arith_floats()
{

2
gdb/testsuite/gdb.trace/tfile.c
View File

@ -176,7 +176,7 @@ write_basic_trace_file (void)
/* Make up a simulated trace buffer. */
/* (Encapsulate better if we're going to do lots of this; note that
buffer endianness is the target program's enddianness.) */
buffer endianness is the target program's endianness.) */
trptr = trbuf;
tfile_write_16 (1);

2
gdb/testsuite/lib/compiler.c
View File

@ -45,7 +45,7 @@ set compiler_info [join {gcc __GNUC__ __GNUC_MINOR__ "unknown"} -]
#if defined (__xlc__)
/* IBM'x xlc compiler. NOTE: __xlc__ expands to a double quoted string of four
numbers seperated by '.'s: currently "7.0.0.0" */
numbers separated by '.'s: currently "7.0.0.0" */
set need_a_set [regsub -all {\.} [join {xlc __xlc__} -] - compiler_info]
#endif

2
gdb/testsuite/lib/compiler.cc
View File

@ -33,7 +33,7 @@ set compiler_info [join {gcc __GNUC__ __GNUC_MINOR__ "unknown"} -]
#if defined (__xlc__)
/* IBM'x xlc compiler. NOTE: __xlc__ expands to a double quoted string of four
numbers seperated by '.'s: currently "7.0.0.0" */
numbers separated by '.'s: currently "7.0.0.0" */
set need_a_set [regsub -all {\.} [join {xlc __xlc__} -] - compiler_info]
#endif

2
gdb/tracepoint.c
View File

@ -2136,7 +2136,7 @@ tfind_1 (enum trace_find_type type, int num,
DON'T give an error, but DO change the state of
traceframe_number etc. to invalid.
The rationalle is that if you typed the command, you
The rationale is that if you typed the command, you
might just have committed a typo or something, and you'd
like to NOT lose your current debugging state. However
if you're in a user-defined command or especially in a

2
gdb/tui/tui-data.h
View File

@ -181,7 +181,7 @@ public:
{
}
/* Set whether this window is highglighted. */
/* Set whether this window is highlighted. */
void set_highlight (bool highlight)
{
is_highlighted = highlight;

2
gdb/tui/tui-io.c
View File

@ -90,7 +90,7 @@ key_is_start_sequence (int ch)
be garbled. This is implemented with a pipe that TUI reads and
readline writes to. A gdb input handler is created so that reading
the pipe is handled automatically. This will probably not work on
non-Unix platforms. The best fix is to make readline clean enougth
non-Unix platforms. The best fix is to make readline clean enough
so that is never write on stdout.
Note SCz/2002-09-01: we now use more readline hooks and it seems

4
gdb/tui/tui-win.c
View File

@ -1050,7 +1050,7 @@ tui_adjust_win_heights (struct tui_win_info *primary_win_info,
second_win = *(tui_source_windows ().begin ());
}
if (primary_win_info == TUI_CMD_WIN)
{ /* Split the change in height accross the 1st & 2nd
{ /* Split the change in height across the 1st & 2nd
windows, adjusting them as well. */
/* Subtract the locator. */
int first_split_diff = diff / 2;
@ -1072,7 +1072,7 @@ tui_adjust_win_heights (struct tui_win_info *primary_win_info,
second_split_diff++;
}
}
/* Make sure that the minimum hieghts are
/* Make sure that the minimum heights are
honored. */
while ((first_win->height + first_split_diff) < 3)
{

2
gdb/tui/tui.c
View File

@ -405,7 +405,7 @@ tui_enable (void)
if (tui_active)
return;
/* To avoid to initialize curses when gdb starts, there is a defered
/* To avoid to initialize curses when gdb starts, there is a deferred
curses initialization. This initialization is made only once
and the first time the curses mode is entered. */
if (tui_finish_init)

2
gdb/unittests/rsp-low-selftests.c
View File

@ -34,7 +34,7 @@ static void test_hex2bin_byte_vector ()
bv = hex2bin ("");
SELF_CHECK (bv.size () == 0);
/* Test a well-formated hex string. */
/* Test a well-formatted hex string. */
bv = hex2bin ("abcd01");
SELF_CHECK (bv.size () == 3);
SELF_CHECK (bv[0] == 0xab);

2
gdb/user-regs.h
View File

@ -36,7 +36,7 @@
/* TODO: cagney/2003-06-27: Need to think more about how these
registers are added, read, and modified. At present they are kind
of assumed to be read-only. Should it, for instance, return a
register descriptor that contains all the relvent access methods. */
register descriptor that contains all the relevant access methods. */
struct frame_info;
struct gdbarch;

4
gdb/utils.c
View File

@ -1281,7 +1281,7 @@ init_page_info (void)
|| getenv ("EMACS") || getenv ("INSIDE_EMACS"))
{
/* The number of lines per page is not mentioned in the terminal
description or EMACS evironment variable is set. This probably
description or EMACS environment variable is set. This probably
means that paging is not useful, so disable paging. */
lines_per_page = UINT_MAX;
}
@ -3098,7 +3098,7 @@ parse_pid_to_attach (const char *args)
return pid;
}
/* Substitute all occurences of string FROM by string TO in *STRINGP. *STRINGP
/* Substitute all occurrences of string FROM by string TO in *STRINGP. *STRINGP
must come from xrealloc-compatible allocator and it may be updated. FROM
needs to be delimited by IS_DIR_SEPARATOR or DIRNAME_SEPARATOR (or be
located at the start or end of *STRINGP. */

2
gdb/utils.h
View File

@ -125,7 +125,7 @@ void reset_prompt_for_continue_wait_time (void);
/* Return the time spent in prompt_for_continue. */
std::chrono::steady_clock::duration get_prompt_for_continue_wait_time ();
/* Parsing utilites. */
/* Parsing utilities. */
extern int parse_pid_to_attach (const char *args);

2
gdb/valarith.c
View File

@ -335,7 +335,7 @@ value_user_defined_op (struct value **argp, gdb::array_view<value *> args,
arg1.operator @ (arg1,arg2) and return that value (where '@' is any
binary operator which is legal for GNU C++).
OP is the operatore, and if it is BINOP_ASSIGN_MODIFY, then OTHEROP
OP is the operator, and if it is BINOP_ASSIGN_MODIFY, then OTHEROP
is the opcode saying how to modify it. Otherwise, OTHEROP is
unused. */

Some files were not shown because too many files have changed in this diff Show More