* lib/mi-support.exp (mi_expect_stop): New.
(mi_run_cmd): Change the token. Use mi_send_resuming_command, use mi_expect_stop. (mi_execute_to_helper): Rename to mi_execute_to. (mi_send_resuming_command): Add more error patterns. (mi_wait_for_stop): Renamed to... (mi_get_stop_line): ...this. (mi_run_inline_test): Adjust. * gdb.mi/mi-cli.exp: Use mi_execute_to/mi_expect_stop. * gdb.mi/mi-console.exp: Likewise. * gdb.mi/mi-pending.exp: Likewise. * gdb.mi/mi-simplerun.exp: Likewise. * gdb.mi/mi-stack.exp: Likewise. * gdb.mi/mi-stepi.exp: Likewise. * gdb.mi/mi-syn-frame.exp: Add comment. * gdb.mi/mi-until.exp: Likewise. * gdb.mi/mi-var-display.exp: Likewise. * gdb.mi/mi-watch.exp: Likewise. * gdb.mi/mi2-cli.exp: Likewise. * gdb.mi/mi2-console.exp: Likewise. * gdb.mi/mi2-simplerun.exp: Likewise. * gdb.mi/mi2-stack.exp: Likewise. * gdb.mi/mi2-stepi.exp: Likewise. * gdb.mi/mi2-until.exp: Likewise. * gdb.mi/mi2-var-display.exp: Likewise. * gdb.mi/mi2-watch.exp: Likewise.
This commit is contained in:
Vladimir Prus
parent
051568b4d0
commit
bb3784283e
@ -1,3 +1,34 @@
|
||||
2008-04-05 Vladimir Prus <vladimir@codesourcery.com>
|
||||
|
||||
* lib/mi-support.exp (mi_expect_stop): New.
|
||||
(mi_run_cmd): Change the
|
||||
token. Use mi_send_resuming_command, use
|
||||
mi_expect_stop.
|
||||
(mi_execute_to_helper): Rename to mi_execute_to.
|
||||
(mi_send_resuming_command): Add more error patterns.
|
||||
(mi_wait_for_stop): Renamed to...
|
||||
(mi_get_stop_line): ...this.
|
||||
(mi_run_inline_test): Adjust.
|
||||
|
||||
* gdb.mi/mi-cli.exp: Use mi_execute_to/mi_expect_stop.
|
||||
* gdb.mi/mi-console.exp: Likewise.
|
||||
* gdb.mi/mi-pending.exp: Likewise.
|
||||
* gdb.mi/mi-simplerun.exp: Likewise.
|
||||
* gdb.mi/mi-stack.exp: Likewise.
|
||||
* gdb.mi/mi-stepi.exp: Likewise.
|
||||
* gdb.mi/mi-syn-frame.exp: Add comment.
|
||||
* gdb.mi/mi-until.exp: Likewise.
|
||||
* gdb.mi/mi-var-display.exp: Likewise.
|
||||
* gdb.mi/mi-watch.exp: Likewise.
|
||||
* gdb.mi/mi2-cli.exp: Likewise.
|
||||
* gdb.mi/mi2-console.exp: Likewise.
|
||||
* gdb.mi/mi2-simplerun.exp: Likewise.
|
||||
* gdb.mi/mi2-stack.exp: Likewise.
|
||||
* gdb.mi/mi2-stepi.exp: Likewise.
|
||||
* gdb.mi/mi2-until.exp: Likewise.
|
||||
* gdb.mi/mi2-var-display.exp: Likewise.
|
||||
* gdb.mi/mi2-watch.exp: Likewise.
|
||||
|
||||
2008-04-04 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
|
||||
|
||||
* gdb.base/watch_thread_num.exp: Use gdb_compile_pthreads.
|
||||
|
||||
@ -96,19 +96,8 @@ mi_gdb_test "-interpreter-exec console \"list\"" \
|
||||
".*\~\"$line_main_body\[\\\\t \]*callee1.*;\\\\n\".*\\^done" \
|
||||
"-interpreter-exec console \"list\""
|
||||
|
||||
# # NOTE: cagney/2003-02-03: Not yet.
|
||||
# mi_gdb_test "-exec-continue" \
|
||||
# {.*\*stopped,reason="breakpoint-hit",.*func="callee4".*file=".*basics.c",fullname="${fullname_syntax}${srcfile}",line="8"\}} \
|
||||
# "-interpreter-exec console \"continue to callee4\""
|
||||
send_gdb "999-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "999\\^running\[\r\n\]+$mi_gdb_prompt.*999\\*stopped,reason=.breakpoint-hit.*$mi_gdb_prompt$" {
|
||||
pass "continue to callee4"
|
||||
}
|
||||
timeout {
|
||||
fail "continue to callee4 (timeout)"
|
||||
}
|
||||
}
|
||||
mi_execute_to "exec-continue" "breakpoint-hit" "callee4" "" ".*basics.c" "27" "" \
|
||||
"continue to callee4"
|
||||
|
||||
# NOTE: cagney/2003-02-03: Not yet.
|
||||
# mi_gdb_test "100-interpreter-exec console \"delete 2\"" \
|
||||
@ -158,32 +147,11 @@ mi_gdb_test "600-break-insert -t basics.c:$line_main_hello" \
|
||||
{600\^done,bkpt=.number="3",type="breakpoint".*\}} \
|
||||
"-break-insert -t basics.c:\$line_main_hello"
|
||||
|
||||
# mi_gdb_test "-exec-continue" \
|
||||
# {.*\*stopped.*,file=".*basics.c",fullname="${fullname_syntax}${srcfile}",line="$line_main_hello"\}} \
|
||||
# "-exec-continue to line \$line_main_hello"
|
||||
send_gdb "700-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "700\\^running\[\r\n\]+$mi_gdb_prompt.*\\*stopped.*,file=\".*basics.c\",fullname=\"${fullname_syntax}${srcfile}\",line=.$line_main_hello.*$mi_gdb_prompt$" {
|
||||
pass "-exec-continue to line \$line_main_hello"
|
||||
}
|
||||
timeout {
|
||||
fail "-exec-continue to line \$line_main_hello"
|
||||
}
|
||||
}
|
||||
mi_execute_to "exec-continue" "" "main" "" ".*basics.c" $line_main_hello "" \
|
||||
"-exec-continue to line $line_main_hello"
|
||||
|
||||
# NOTE: cagney/2003-02-03: Not yet.
|
||||
# mi_gdb_test "-exec-next" \
|
||||
# {.*\*stopped,reason="end-stepping-range",.*,file=".*basics.c",fullname="${fullname_syntax}${srcfile}",line="$line_main_return"\}} \
|
||||
# "-exec-next to line \$line_main_return"
|
||||
send_gdb "800-exec-next\n"
|
||||
gdb_expect {
|
||||
-re "800\\^running\[\r\n\]+$mi_gdb_prompt.*\\*stopped,reason=.end-stepping-range.*,file=\".*basics.c\",fullname=\"${fullname_syntax}${srcfile}\",line=.$line_main_return.*$mi_gdb_prompt$" {
|
||||
pass "-exec-next to line \$line_main_return"
|
||||
}
|
||||
timeout {
|
||||
fail "-exec-next to line \$line_main_return"
|
||||
}
|
||||
}
|
||||
mi_execute_to "exec-next" "end-stepping-range" "main" "" ".*basics.c" $line_main_return "" \
|
||||
"-exec-next to line $line_main_return"
|
||||
|
||||
mi_gdb_test "-interpreter-exec console \"list\"" \
|
||||
"\~\"$line_main_return\[\\\\t ]*callme \\(1\\);\\\\n\".*\\^done" \
|
||||
|
||||
@ -51,12 +51,13 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb
|
||||
mi_run_to_main
|
||||
|
||||
# Next over the hello() call which will produce lots of output
|
||||
mi_gdb_test "47-exec-next" \
|
||||
"47\\^running" \
|
||||
mi_gdb_test "220-exec-next" \
|
||||
"220\\^running" \
|
||||
"Testing console output" \
|
||||
"Hello \\\\\"!\[\r\n\]+"
|
||||
|
||||
mi_gdb_test "" "47\\*stopped.*" "Finished step over hello"
|
||||
mi_expect_stop "end-stepping-range" "main" "" ".*mi-console.c" "14" "" \
|
||||
"finished step over hello"
|
||||
|
||||
mi_gdb_exit
|
||||
return 0
|
||||
|
||||
@ -68,8 +68,5 @@ mi_gdb_test "-break-insert -f pendfunc1" \
|
||||
"MI pending breakpoint on pendfunc1"
|
||||
|
||||
mi_run_cmd
|
||||
|
||||
# Make sure we hit breakpoint.
|
||||
mi_gdb_test "" \
|
||||
".*\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\".*func=\"pendfunc1\".*" \
|
||||
mi_expect_stop "breakpoint-hit" "pendfunc1" ".*" ".*" ".*" "" \
|
||||
"Run till MI pending breakpoint on pendfunc1"
|
||||
@ -113,17 +113,7 @@ proc test_running_the_program {} {
|
||||
# two prompts involved and this can lead to a race condition.
|
||||
# The following is equivalent to a send_gdb "000-exec-run\n"
|
||||
mi_run_cmd
|
||||
gdb_expect {
|
||||
-re "000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"main\",args=\\\[\\\],file=\".*basics.c\",line=\"$line_main_body\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "run to main"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {
|
||||
fail "run to main (2)"
|
||||
}
|
||||
timeout {
|
||||
fail "run to main (timeout)"
|
||||
}
|
||||
}
|
||||
mi_expect_stop "breakpoint-hit" "main" "" ".*basics.c" "$line_main_body" "" "run to main"
|
||||
}
|
||||
|
||||
proc test_controlled_execution {} {
|
||||
@ -191,23 +181,7 @@ proc test_program_termination {} {
|
||||
# -exec-abort
|
||||
# (normal termination of inferior)
|
||||
|
||||
# FIXME: "stopped" doesn't seem appropriate.
|
||||
# mi_gdb_test cannot be used for asynchronous commands because there are
|
||||
# two prompts involved and this can lead to a race condition.
|
||||
send_gdb "999-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "999\\^running\r\n$mi_gdb_prompt" {
|
||||
gdb_expect {
|
||||
-re "999\\*stopped,reason=\"exited-normally\"\r\n$mi_gdb_prompt$" {
|
||||
pass "continue to end"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "continue to end (2)"}
|
||||
timeout {fail "continue to end (timeout 2)"}
|
||||
}
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "continue to end (1)"}
|
||||
timeout {fail "continue to end (timeout 1)"}
|
||||
}
|
||||
mi_execute_to "exec-continue" "exited-normally" "" "" "" "" "" "continue to end"
|
||||
}
|
||||
|
||||
test_breakpoints_creation_and_listing
|
||||
|
||||
@ -173,13 +173,8 @@ proc test_stack_locals_listing {} {
|
||||
set line_callee4_return_0 [gdb_get_line_number "return 0;"]
|
||||
|
||||
# step until A, B, C, D have some reasonable values.
|
||||
send_gdb "-exec-next 4\n"
|
||||
gdb_expect {
|
||||
-re "\\^running\r\n${mi_gdb_prompt}\\*stopped,reason=\"end-stepping-range\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"callee4\",args=\\\[\\\],file=\".*${srcfile}\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$line_callee4_return_0\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "next's in callee4"
|
||||
}
|
||||
timeout { fail "next in callee4 (timeout)" }
|
||||
}
|
||||
mi_execute_to "exec-next 4" "end-stepping-range" "callee4" "" ".*${srcfile}" $line_callee4_return_0 ""\
|
||||
"next's in callee4"
|
||||
|
||||
mi_gdb_test "232-stack-list-locals 1" \
|
||||
"232\\^done,locals=\\\[\{name=\"A\",value=\"1\"\},\{name=\"B\",value=\"2\"\},\{name=\"C\",value=\"3\"\},\{name=\"D\",value=\"\\{0, 1, 2\\}\"\}\\\]" \
|
||||
|
||||
@ -47,47 +47,28 @@ proc test_stepi_nexti {} {
|
||||
set line_main_body [expr $line_main_head + 2]
|
||||
set line_main_hello [gdb_get_line_number "Hello, World!"]
|
||||
|
||||
send_gdb "111-exec-step-instruction\n"
|
||||
gdb_expect {
|
||||
-re "111\\^running\r\n${mi_gdb_prompt}111\\*stopped,reason=\"end-stepping-range\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"main\",args=\\\[\\\],file=\".*basics.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"(\[0-9\]+)\"\}\r\n$mi_gdb_prompt$" {
|
||||
set line $expect_out(2,string)
|
||||
if { $line >= $line_main_body && $line <= $line_main_hello } {
|
||||
pass "step-instruction at main"
|
||||
} else {
|
||||
fail "step-instruction at main"
|
||||
}
|
||||
}
|
||||
timeout {
|
||||
fail "step-instruction at main (timeout)"
|
||||
}
|
||||
set line [mi_execute_to "exec-step-instruction" "end-stepping-range" "main" "" \
|
||||
".*basics.c" "\[0-9\]+" "" "step-instruction at main"]
|
||||
if { $line >= $line_main_body && $line <= $line_main_hello } {
|
||||
pass "step-instruction at main (line check)"
|
||||
} else {
|
||||
fail "step-instruction at main (line check)"
|
||||
}
|
||||
|
||||
set line [mi_execute_to "exec-next-instruction" "end-stepping-range" "main" "" \
|
||||
".*basics.c" "\[0-9\]+" "" "next-instruction at main"]
|
||||
if { $line >= $line_main_body && $line <= $line_main_hello } {
|
||||
pass "next-instruction at main (line check)"
|
||||
} else {
|
||||
fail "next-instruction at main (line check)"
|
||||
}
|
||||
send_gdb "222-exec-next-instruction\n"
|
||||
gdb_expect {
|
||||
-re "222\\^running\r\n${mi_gdb_prompt}222\\*stopped,reason=\"end-stepping-range\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"main\",args=\\\[\\\],file=\".*basics.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"(\[0-9\]+)\"\}\r\n$mi_gdb_prompt$" {
|
||||
set line $expect_out(2,string)
|
||||
if { $line >= $line_main_body && $line <= $line_main_hello } {
|
||||
pass "next-instruction at main"
|
||||
} else {
|
||||
fail "next-instruction at main"
|
||||
}
|
||||
}
|
||||
timeout {
|
||||
fail "next-instruction at main (timeout)"
|
||||
}
|
||||
}
|
||||
send_gdb "333-exec-next-instruction\n"
|
||||
gdb_expect {
|
||||
-re "333\\^running\r\n${mi_gdb_prompt}333\\*stopped,reason=\"end-stepping-range\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"main\",args=\\\[\\\],file=\".*basics.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"(\[0-9\]+)\"\}\r\n$mi_gdb_prompt$" {
|
||||
set line $expect_out(2,string)
|
||||
if { $line >= $line_main_body && $line <= $line_main_hello } {
|
||||
pass "next-instruction at main"
|
||||
} else {
|
||||
fail "next-instruction at main"
|
||||
}
|
||||
}
|
||||
timeout {
|
||||
fail "next-instruction at main (timeout)"
|
||||
}
|
||||
|
||||
set line [mi_execute_to "exec-next-instruction" "end-stepping-range" "main" "" \
|
||||
".*basics.c" "\[0-9\]+" "" "next-instruction at main 2"]
|
||||
if { $line >= $line_main_body && $line <= $line_main_hello } {
|
||||
pass "next-instruction at main 2 (line check)"
|
||||
} else {
|
||||
fail "next-instruction at main 2 (line check)"
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -60,6 +60,8 @@ mi_gdb_test "403-exec-continue" \
|
||||
"403\\^running" \
|
||||
"testing exec continue"
|
||||
|
||||
# Presently, the *stopped notification for this case does not include
|
||||
# any information. This can be considered a bug.
|
||||
mi_gdb_test "" "403\\*stopped" "finished exec continue"
|
||||
|
||||
mi_gdb_test "404-stack-list-frames 0 0" \
|
||||
|
||||
@ -55,18 +55,7 @@ proc test_running_to_foo {} {
|
||||
"break-insert operation"
|
||||
|
||||
mi_run_cmd
|
||||
|
||||
gdb_expect {
|
||||
-re "000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"foo\",args=\\\[\\\],file=\".*until.c\",line=\"10\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "run to main"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {
|
||||
fail "run to main (2)"
|
||||
}
|
||||
timeout {
|
||||
fail "run to main (timeout)"
|
||||
}
|
||||
}
|
||||
mi_expect_stop "breakpoint-hit" "foo" "" ".*until.c" 10 "" "run to main"
|
||||
|
||||
mi_gdb_test "100-break-delete 1" "100\\^done" "break-delete 1"
|
||||
|
||||
@ -76,51 +65,19 @@ proc test_until {} {
|
||||
global mi_gdb_prompt
|
||||
global hex fullname_syntax srcfile
|
||||
|
||||
send_gdb "111-exec-until\n"
|
||||
gdb_expect {
|
||||
-re "111\\^running\r\n${mi_gdb_prompt}111\\*stopped,reason=\"end-stepping-range\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"foo\",args=\\\[\\\],file=\".*until.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"12\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "until after while loop"
|
||||
}
|
||||
-re "111\\^running\r\n${mi_gdb_prompt}111\\*stopped,reason=\"end-stepping-range\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"foo\",args=\\\[\\\],file=\".*until.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"9\"\}\r\n$mi_gdb_prompt$" {
|
||||
kfail gdb/2104 "until after while loop (went backwards)"
|
||||
}
|
||||
timeout {
|
||||
fail "until after while loop (timeout)"
|
||||
}
|
||||
}
|
||||
setup_kfail gdb/2104 "*-*-*"
|
||||
mi_execute_to "exec-until" "end-stepping-range" "foo" "" ".*until.c" "12" "" \
|
||||
"until after while loop"
|
||||
|
||||
send_gdb "222-exec-until 15\n"
|
||||
gdb_expect {
|
||||
-re "222\\^running\r\n${mi_gdb_prompt}222\\*stopped,reason=\"location-reached\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"foo\",args=\\\[\\\],file=\".*until.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"15\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "until line number"
|
||||
}
|
||||
timeout {
|
||||
fail "until line number (timeout)"
|
||||
}
|
||||
}
|
||||
mi_execute_to "exec-until 15" "location-reached" "foo" "" ".*until.c" "15" ""\
|
||||
"until line number"
|
||||
|
||||
send_gdb "333-exec-until until.c:17\n"
|
||||
gdb_expect {
|
||||
-re "333\\^running\r\n${mi_gdb_prompt}333\\*stopped,reason=\"location-reached\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"foo\",args=\\\[\\\],file=\".*until.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"17\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "until line number:file"
|
||||
}
|
||||
timeout {
|
||||
fail "until line number:file (timeout)"
|
||||
}
|
||||
}
|
||||
mi_execute_to "exec-until until.c:17" "location-reached" "foo" "" ".*until.c" "17" ""\
|
||||
"until line number:file"
|
||||
|
||||
# This is supposed to NOT stop at line 25. It stops right after foo is over.
|
||||
|
||||
send_gdb "444-exec-until until.c:25\n"
|
||||
gdb_expect {
|
||||
-re "444\\^running\r\n${mi_gdb_prompt}444\\*stopped,reason=\"location-reached\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"main\",args=\\\[\\\],file=\".*until.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"(23|24)\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "until after current function"
|
||||
}
|
||||
timeout {
|
||||
fail "until after current function (timeout)"
|
||||
}
|
||||
}
|
||||
|
||||
mi_execute_to "exec-until until.c:25" "location-reached" "main" "" ".*until.c" "(23|24)" ""\
|
||||
"until after current function"
|
||||
}
|
||||
|
||||
test_running_to_foo
|
||||
|
||||
@ -47,14 +47,7 @@ mi_gdb_test "200-break-insert $srcfile:$line_dct_end" \
|
||||
"break-insert operation"
|
||||
|
||||
mi_run_cmd
|
||||
# The running part has been checked already by mi_run_cmd
|
||||
gdb_expect {
|
||||
-re "\[\r\n\]*000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"do_children_tests\",args=\\\[\\\],file=\".*var-cmd.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$line_dct_end\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "run to do_children_tests"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "run to do_children_tests (2)"}
|
||||
timeout {fail "run to do_children_tests (timeout 2)"}
|
||||
}
|
||||
mi_expect_stop "breakpoint-hit" "do_children_tests" "" ".*var-cmd.c" $line_dct_end "" "run to main"
|
||||
|
||||
##### #####
|
||||
# #
|
||||
@ -337,15 +330,8 @@ mi_gdb_test "200-break-insert $line_dst_incr_a_2" \
|
||||
"200\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"do_special_tests\",file=\".*var-cmd.c\",line=\"$line_dst_incr_a_2\",times=\"0\"\}" \
|
||||
"break-insert operation"
|
||||
|
||||
send_gdb "-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "\\^running\r\n${mi_gdb_prompt}\\*stopped,reason=\"breakpoint-hit\",bkptno=\"2\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"do_special_tests\",args=\\\[\\\],file=\".*var-cmd.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$line_dst_incr_a_2\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "continue to do_special_tests"
|
||||
}
|
||||
timeout {
|
||||
fail "continue to do_special_tests (timeout)"
|
||||
}
|
||||
}
|
||||
mi_execute_to "exec-continue" "breakpoint-hit" "do_special_tests" "" ".*var-cmd.c" $line_dst_incr_a_2 "" \
|
||||
"continue to do_special_tests"
|
||||
|
||||
# Test: c_variable-7.10
|
||||
# Desc: create union u
|
||||
@ -586,26 +572,7 @@ gdb_expect {
|
||||
timeout { fail "print FP register (timeout)"}
|
||||
}
|
||||
|
||||
set line_incr_a_b_a [gdb_get_line_number "b = a;"]
|
||||
|
||||
mi_gdb_test "200-break-insert incr_a" \
|
||||
"200\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"incr_a\",file=\".*var-cmd.c\",line=\"$line_incr_a_b_a\",times=\"0\"\}" \
|
||||
"break-insert operation"
|
||||
send_gdb "-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "\\^running\r\n${mi_gdb_prompt}\\*stopped,reason=\"breakpoint-hit\",bkptno=\"3\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"incr_a\",args=\\\[\{name=\"a\",value=\"2\.*\"\}\\\],file=\".*var-cmd.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$line_incr_a_b_a\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "continue to incr_a"
|
||||
}
|
||||
-re "\\^running\r\n${mi_gdb_prompt}\\*stopped,reason=\"breakpoint-hit\",bkptno=\"3\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"incr_a\",args=\\\[\{name=\"a\",value=\"\.*\"\}\\\],file=\".*var-cmd.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"([expr $line_incr_a_b_a - 2]|[expr $line_incr_a_b_a - 1]|$line_incr_a_b_a)\"\}\r\n$mi_gdb_prompt$" {
|
||||
fail "continue to incr_a (compiler debug info incorrect)"
|
||||
}
|
||||
-re "\\^running\r\n${mi_gdb_prompt}.*\r\n$mi_gdb_prompt$" {
|
||||
fail "continue to incr_a (unknown output)"
|
||||
}
|
||||
timeout {
|
||||
fail "continue to incr_a (timeout)"
|
||||
}
|
||||
}
|
||||
mi_continue_to "incr_a"
|
||||
|
||||
# Test: c_variable-7.81
|
||||
# Desc: Create variables in different scopes
|
||||
|
||||
@ -132,38 +132,18 @@ proc test_watchpoint_triggering {type} {
|
||||
# -exec-continue (Here wp triggers)
|
||||
# -exec-continue (Here wp goes out of scope)
|
||||
|
||||
send_gdb "222-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "222\\^running\r\n$mi_gdb_prompt" {
|
||||
gdb_expect {
|
||||
-re "222\\*stopped,reason=\"watchpoint-trigger\",wpt=\{number=\"2\",exp=\"C\"\},value=\{old=\".*\",new=\"3\"\},thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"callee4\",args=\\\[\\\],file=\".*basics.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$line_callee4_return_0\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "watchpoint trigger"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "watchpoint trigger (2)"}
|
||||
timeout {fail "watchpoint trigger (timeout 2)"}
|
||||
}
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "watchpoint trigger (1)"}
|
||||
timeout {fail "watchpoint trigger (timeout 1)"}
|
||||
}
|
||||
mi_execute_to "exec-continue" "watchpoint-trigger" "callee4" "" \
|
||||
".*basics.c" $line_callee4_return_0 \
|
||||
{"" "wpt=\{number=\"2\",exp=\"C\"\},value=\{old=\".*\",new=\"3\"\}"} \
|
||||
"watchpoint trigger"
|
||||
|
||||
if { $type == "sw" } {
|
||||
setup_xfail *-*-*
|
||||
}
|
||||
send_gdb "223-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "223\\^running\r\n$mi_gdb_prompt" {
|
||||
gdb_expect {
|
||||
-re "\[\r\n\]*223\\*stopped,reason=\"watchpoint-scope\",wpnum=\"2\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"callee3\",args=\\\[.*\\\],file=\".*basics.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$line_callee3_close_brace\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "wp out of scope"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "wp out of scope (2)"}
|
||||
timeout {fail "wp out of scope (timeout 2)"}
|
||||
}
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "wp out of scope (1)"}
|
||||
timeout {fail "wp out of scope (timeout 1)"}
|
||||
}
|
||||
mi_execute_to "exec-continue" "watchpoint-scope" "callee3" ".*" \
|
||||
".*basics.c" $line_callee3_close_brace \
|
||||
{"" "wpnum=\"2\""} \
|
||||
"watchpoint trigger"
|
||||
clear_xfail *-*-*
|
||||
}
|
||||
|
||||
|
||||
@ -96,19 +96,8 @@ mi_gdb_test "-interpreter-exec console \"list\"" \
|
||||
".*\~\"$line_main_body\[\\\\t \]*callee1.*;\\\\n\".*\\^done" \
|
||||
"-interpreter-exec console \"list\""
|
||||
|
||||
# # NOTE: cagney/2003-02-03: Not yet.
|
||||
# mi_gdb_test "-exec-continue" \
|
||||
# {.*\*stopped,reason="breakpoint-hit",.*func="callee4".*file=".*basics.c",line="8"\}} \
|
||||
# "-interpreter-exec console \"continue to callee4\""
|
||||
send_gdb "999-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "999\\^running\[\r\n\]+$mi_gdb_prompt.*999\\*stopped,reason=.breakpoint-hit.*$mi_gdb_prompt$" {
|
||||
pass "continue to callee4"
|
||||
}
|
||||
timeout {
|
||||
fail "continue to callee4 (timeout)"
|
||||
}
|
||||
}
|
||||
mi_execute_to "exec-continue" "breakpoint-hit" "callee4" "" ".*basics.c" "27" "" \
|
||||
"continue to callee4"
|
||||
|
||||
# NOTE: cagney/2003-02-03: Not yet.
|
||||
# mi_gdb_test "100-interpreter-exec console \"delete 2\"" \
|
||||
@ -158,32 +147,11 @@ mi_gdb_test "600-break-insert -t basics.c:$line_main_hello" \
|
||||
{600\^done,bkpt=.number="3",type="breakpoint".*\}} \
|
||||
"-break-insert -t basics.c:\$line_main_hello"
|
||||
|
||||
# mi_gdb_test "-exec-continue" \
|
||||
# {.*\*stopped.*,file=".*basics.c",fullname="${fullname_syntax}${srcfile}",line="$line_main_hello"\}} \
|
||||
# "-exec-continue to line \$line_main_hello"
|
||||
send_gdb "700-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "700\\^running\[\r\n\]+$mi_gdb_prompt.*\\*stopped.*,file=\".*basics.c\",fullname=\"${fullname_syntax}${srcfile}\",line=.$line_main_hello.*$mi_gdb_prompt$" {
|
||||
pass "-exec-continue to line \$line_main_hello"
|
||||
}
|
||||
timeout {
|
||||
fail "-exec-continue to line \$line_main_hello"
|
||||
}
|
||||
}
|
||||
mi_execute_to "exec-continue" "" "main" "" ".*basics.c" $line_main_hello "" \
|
||||
"-exec-continue to line $line_main_hello"
|
||||
|
||||
# NOTE: cagney/2003-02-03: Not yet.
|
||||
# mi_gdb_test "-exec-next" \
|
||||
# {.*\*stopped,reason="end-stepping-range",.*,file=".*basics.c",fullname="${fullname_syntax}${srcfile}",line="$line_main_return"\}} \
|
||||
# "-exec-next to line \$line_main_return"
|
||||
send_gdb "800-exec-next\n"
|
||||
gdb_expect {
|
||||
-re "800\\^running\[\r\n\]+$mi_gdb_prompt.*\\*stopped,reason=.end-stepping-range.*,file=\".*basics.c\",fullname=\"${fullname_syntax}${srcfile}\",line=.$line_main_return.*$mi_gdb_prompt$" {
|
||||
pass "-exec-next to line \$line_main_return"
|
||||
}
|
||||
timeout {
|
||||
fail "-exec-next to line \$line_main_return"
|
||||
}
|
||||
}
|
||||
mi_execute_to "exec-next" "end-stepping-range" "main" "" ".*basics.c" $line_main_return "" \
|
||||
"-exec-next to line $line_main_return"
|
||||
|
||||
mi_gdb_test "-interpreter-exec console \"list\"" \
|
||||
"\~\"$line_main_return\[\\\\t ]*callme \\(1\\);\\\\n\".*\\^done" \
|
||||
|
||||
@ -51,9 +51,9 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb
|
||||
mi_run_to_main
|
||||
|
||||
# Next over the hello() call which will produce lots of output
|
||||
send_gdb "47-exec-next\n"
|
||||
send_gdb "220-exec-next\n"
|
||||
gdb_expect {
|
||||
-re "47\\^running\r\n$mi_gdb_prompt" {
|
||||
-re "220\\^running\r\n$mi_gdb_prompt" {
|
||||
pass "Started step over hello"
|
||||
}
|
||||
timeout {
|
||||
@ -83,14 +83,8 @@ if { ![target_info exists gdb,noinferiorio] } {
|
||||
}
|
||||
}
|
||||
|
||||
gdb_expect {
|
||||
-re "47\\*stopped.*$mi_gdb_prompt$" {
|
||||
pass "Finished step over hello"
|
||||
}
|
||||
timeout {
|
||||
fail "Finished step over hello (timeout)"
|
||||
}
|
||||
}
|
||||
mi_expect_stop "end-stepping-range" "main" "" ".*mi-console.c" "14" "" \
|
||||
"finished step over hello"
|
||||
|
||||
mi_gdb_exit
|
||||
return 0
|
||||
|
||||
@ -113,17 +113,7 @@ proc test_running_the_program {} {
|
||||
# two prompts involved and this can lead to a race condition.
|
||||
# The following is equivalent to a send_gdb "000-exec-run\n"
|
||||
mi_run_cmd
|
||||
gdb_expect {
|
||||
-re "000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"main\",args=\\\[\\\],file=\".*basics.c\",line=\"$line_main_body\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "run to main"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {
|
||||
fail "run to main (2)"
|
||||
}
|
||||
timeout {
|
||||
fail "run to main (timeout)"
|
||||
}
|
||||
}
|
||||
mi_expect_stop "breakpoint-hit" "main" "" ".*basics.c" "$line_main_body" "" "run to main"
|
||||
}
|
||||
|
||||
proc test_controlled_execution {} {
|
||||
@ -191,23 +181,7 @@ proc test_program_termination {} {
|
||||
# -exec-abort
|
||||
# (normal termination of inferior)
|
||||
|
||||
# FIXME: "stopped" doesn't seem appropriate.
|
||||
# mi_gdb_test cannot be used for asynchronous commands because there are
|
||||
# two prompts involved and this can lead to a race condition.
|
||||
send_gdb "999-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "999\\^running\r\n$mi_gdb_prompt" {
|
||||
gdb_expect {
|
||||
-re "999\\*stopped,reason=\"exited-normally\"\r\n$mi_gdb_prompt$" {
|
||||
pass "continue to end"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "continue to end (2)"}
|
||||
timeout {fail "continue to end (timeout 2)"}
|
||||
}
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "continue to end (1)"}
|
||||
timeout {fail "continue to end (timeout 1)"}
|
||||
}
|
||||
mi_execute_to "exec-continue" "exited-normally" "" "" "" "" "" "continue to end"
|
||||
}
|
||||
|
||||
test_breakpoints_creation_and_listing
|
||||
|
||||
@ -173,13 +173,8 @@ proc test_stack_locals_listing {} {
|
||||
set line_callee4_return_0 [gdb_get_line_number "return 0;"]
|
||||
|
||||
# step until A, B, C, D have some reasonable values.
|
||||
send_gdb "-exec-next 4\n"
|
||||
gdb_expect {
|
||||
-re "\\^running\r\n${mi_gdb_prompt}\\*stopped,reason=\"end-stepping-range\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"callee4\",args=\\\[\\\],file=\".*${srcfile}\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$line_callee4_return_0\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "next's in callee4"
|
||||
}
|
||||
timeout { fail "next in callee4 (timeout)" }
|
||||
}
|
||||
mi_execute_to "exec-next 4" "end-stepping-range" "callee4" "" ".*${srcfile}" $line_callee4_return_0 ""\
|
||||
"next's in callee4"
|
||||
|
||||
mi_gdb_test "232-stack-list-locals 1" \
|
||||
"232\\^done,locals=\\\[\{name=\"A\",value=\"1\"\},\{name=\"B\",value=\"2\"\},\{name=\"C\",value=\"3\"\},\{name=\"D\",value=\"\\{0, 1, 2\\}\"\}\\\]" \
|
||||
|
||||
@ -47,47 +47,28 @@ proc test_stepi_nexti {} {
|
||||
set line_main_body [expr $line_main_head + 2]
|
||||
set line_main_hello [gdb_get_line_number "Hello, World!"]
|
||||
|
||||
send_gdb "111-exec-step-instruction\n"
|
||||
gdb_expect {
|
||||
-re "111\\^running\r\n${mi_gdb_prompt}111\\*stopped,reason=\"end-stepping-range\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"main\",args=\\\[\\\],file=\".*basics.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"(\[0-9\]+)\"\}\r\n$mi_gdb_prompt$" {
|
||||
set line $expect_out(2,string)
|
||||
if { $line >= $line_main_body && $line <= $line_main_hello } {
|
||||
pass "step-instruction at main"
|
||||
} else {
|
||||
fail "step-instruction at main"
|
||||
}
|
||||
}
|
||||
timeout {
|
||||
fail "step-instruction at main (timeout)"
|
||||
}
|
||||
set line [mi_execute_to "exec-step-instruction" "end-stepping-range" "main" "" \
|
||||
".*basics.c" "\[0-9\]+" "" "step-instruction at main"]
|
||||
if { $line >= $line_main_body && $line <= $line_main_hello } {
|
||||
pass "step-instruction at main (line check)"
|
||||
} else {
|
||||
fail "step-instruction at main (line check)"
|
||||
}
|
||||
|
||||
set line [mi_execute_to "exec-next-instruction" "end-stepping-range" "main" "" \
|
||||
".*basics.c" "\[0-9\]+" "" "next-instruction at main"]
|
||||
if { $line >= $line_main_body && $line <= $line_main_hello } {
|
||||
pass "next-instruction at main (line check)"
|
||||
} else {
|
||||
fail "next-instruction at main (line check)"
|
||||
}
|
||||
send_gdb "222-exec-next-instruction\n"
|
||||
gdb_expect {
|
||||
-re "222\\^running\r\n${mi_gdb_prompt}222\\*stopped,reason=\"end-stepping-range\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"main\",args=\\\[\\\],file=\".*basics.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"(\[0-9\]+)\"\}\r\n$mi_gdb_prompt$" {
|
||||
set line $expect_out(2,string)
|
||||
if { $line >= $line_main_body && $line <= $line_main_hello } {
|
||||
pass "next-instruction at main"
|
||||
} else {
|
||||
fail "next-instruction at main"
|
||||
}
|
||||
}
|
||||
timeout {
|
||||
fail "next-instruction at main (timeout)"
|
||||
}
|
||||
}
|
||||
send_gdb "333-exec-next-instruction\n"
|
||||
gdb_expect {
|
||||
-re "333\\^running\r\n${mi_gdb_prompt}333\\*stopped,reason=\"end-stepping-range\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"main\",args=\\\[\\\],file=\".*basics.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"(\[0-9\]+)\"\}\r\n$mi_gdb_prompt$" {
|
||||
set line $expect_out(2,string)
|
||||
if { $line >= $line_main_body && $line <= $line_main_hello } {
|
||||
pass "next-instruction at main"
|
||||
} else {
|
||||
fail "next-instruction at main"
|
||||
}
|
||||
}
|
||||
timeout {
|
||||
fail "next-instruction at main (timeout)"
|
||||
}
|
||||
|
||||
set line [mi_execute_to "exec-next-instruction" "end-stepping-range" "main" "" \
|
||||
".*basics.c" "\[0-9\]+" "" "next-instruction at main 2"]
|
||||
if { $line >= $line_main_body && $line <= $line_main_hello } {
|
||||
pass "next-instruction at main 2 (line check)"
|
||||
} else {
|
||||
fail "next-instruction at main 2 (line check)"
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -56,18 +56,7 @@ proc test_running_to_foo {} {
|
||||
"break-insert operation"
|
||||
|
||||
mi_run_cmd
|
||||
|
||||
gdb_expect {
|
||||
-re "000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"foo\",args=\\\[\\\],file=\".*until.c\",line=\"10\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "run to main"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {
|
||||
fail "run to main (2)"
|
||||
}
|
||||
timeout {
|
||||
fail "run to main (timeout)"
|
||||
}
|
||||
}
|
||||
mi_expect_stop "breakpoint-hit" "foo" "" ".*until.c" 10 "" "run to main"
|
||||
|
||||
mi_gdb_test "100-break-delete 1" "100\\^done" "break-delete 1"
|
||||
|
||||
@ -77,51 +66,19 @@ proc test_until {} {
|
||||
global mi_gdb_prompt
|
||||
global hex fullname_syntax srcfile
|
||||
|
||||
send_gdb "111-exec-until\n"
|
||||
gdb_expect {
|
||||
-re "111\\^running\r\n${mi_gdb_prompt}111\\*stopped,reason=\"end-stepping-range\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"foo\",args=\\\[\\\],file=\".*until.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"12\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "until after while loop"
|
||||
}
|
||||
-re "111\\^running\r\n${mi_gdb_prompt}111\\*stopped,reason=\"end-stepping-range\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"foo\",args=\\\[\\\],file=\".*until.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"9\"\}\r\n$mi_gdb_prompt$" {
|
||||
kfail gdb/2104 "until after while loop (went backwards)"
|
||||
}
|
||||
timeout {
|
||||
fail "until after while loop (timeout)"
|
||||
}
|
||||
}
|
||||
setup_kfail gdb/2104 "*-*-*"
|
||||
mi_execute_to "exec-until" "end-stepping-range" "foo" "" ".*until.c" "12" "" \
|
||||
"until after while loop"
|
||||
|
||||
send_gdb "222-exec-until 15\n"
|
||||
gdb_expect {
|
||||
-re "222\\^running\r\n${mi_gdb_prompt}222\\*stopped,reason=\"location-reached\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"foo\",args=\\\[\\\],file=\".*until.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"15\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "until line number"
|
||||
}
|
||||
timeout {
|
||||
fail "until line number (timeout)"
|
||||
}
|
||||
}
|
||||
mi_execute_to "exec-until 15" "location-reached" "foo" "" ".*until.c" "15" ""\
|
||||
"until line number"
|
||||
|
||||
send_gdb "333-exec-until until.c:17\n"
|
||||
gdb_expect {
|
||||
-re "333\\^running\r\n${mi_gdb_prompt}333\\*stopped,reason=\"location-reached\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"foo\",args=\\\[\\\],file=\".*until.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"17\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "until line number:file"
|
||||
}
|
||||
timeout {
|
||||
fail "until line number:file (timeout)"
|
||||
}
|
||||
}
|
||||
mi_execute_to "exec-until until.c:17" "location-reached" "foo" "" ".*until.c" "17" ""\
|
||||
"until line number:file"
|
||||
|
||||
# This is supposed to NOT stop at line 25. It stops right after foo is over.
|
||||
|
||||
send_gdb "444-exec-until until.c:25\n"
|
||||
gdb_expect {
|
||||
-re "444\\^running\r\n${mi_gdb_prompt}444\\*stopped,reason=\"location-reached\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"main\",args=\\\[\\\],file=\".*until.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"(23|24)\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "until after current function"
|
||||
}
|
||||
timeout {
|
||||
fail "until after current function (timeout)"
|
||||
}
|
||||
}
|
||||
|
||||
mi_execute_to "exec-until until.c:25" "location-reached" "main" "" ".*until.c" "(23|24)" ""\
|
||||
"until after current function"
|
||||
}
|
||||
|
||||
test_running_to_foo
|
||||
|
||||
@ -47,14 +47,7 @@ mi_gdb_test "200-break-insert $srcfile:$line_dct_end" \
|
||||
"break-insert operation"
|
||||
|
||||
mi_run_cmd
|
||||
# The running part has been checked already by mi_run_cmd
|
||||
gdb_expect {
|
||||
-re "\[\r\n\]*000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"do_children_tests\",args=\\\[\\\],file=\".*var-cmd.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$line_dct_end\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "run to do_children_tests"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "run to do_children_tests (2)"}
|
||||
timeout {fail "run to do_children_tests (timeout 2)"}
|
||||
}
|
||||
mi_expect_stop "breakpoint-hit" "do_children_tests" "" ".*var-cmd.c" $line_dct_end "" "run to main"
|
||||
|
||||
##### #####
|
||||
# #
|
||||
@ -337,15 +330,8 @@ mi_gdb_test "200-break-insert $line_dst_incr_a_2" \
|
||||
"200\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"do_special_tests\",file=\".*var-cmd.c\",line=\"$line_dst_incr_a_2\",times=\"0\"\}" \
|
||||
"break-insert operation"
|
||||
|
||||
send_gdb "-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "\\^running\r\n${mi_gdb_prompt}\\*stopped,reason=\"breakpoint-hit\",bkptno=\"2\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"do_special_tests\",args=\\\[\\\],file=\".*var-cmd.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$line_dst_incr_a_2\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "continue to do_special_tests"
|
||||
}
|
||||
timeout {
|
||||
fail "continue to do_special_tests (timeout)"
|
||||
}
|
||||
}
|
||||
mi_execute_to "exec-continue" "breakpoint-hit" "do_special_tests" "" ".*var-cmd.c" $line_dst_incr_a_2 "" \
|
||||
"continue to do_special_tests"
|
||||
|
||||
# Test: c_variable-7.10
|
||||
# Desc: create union u
|
||||
@ -586,26 +572,7 @@ gdb_expect {
|
||||
timeout { fail "print FP register (timeout)"}
|
||||
}
|
||||
|
||||
set line_incr_a_b_a [gdb_get_line_number "b = a;"]
|
||||
|
||||
mi_gdb_test "200-break-insert incr_a" \
|
||||
"200\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"incr_a\",file=\".*var-cmd.c\",line=\"$line_incr_a_b_a\",times=\"0\"\}" \
|
||||
"break-insert operation"
|
||||
send_gdb "-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "\\^running\r\n${mi_gdb_prompt}\\*stopped,reason=\"breakpoint-hit\",bkptno=\"3\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"incr_a\",args=\\\[\{name=\"a\",value=\"2\.*\"\}\\\],file=\".*var-cmd.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"$line_incr_a_b_a\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "continue to incr_a"
|
||||
}
|
||||
-re "\\^running\r\n${mi_gdb_prompt}\\*stopped,reason=\"breakpoint-hit\",bkptno=\"3\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"incr_a\",args=\\\[\{name=\"a\",value=\"\.*\"\}\\\],file=\".*var-cmd.c\",fullname=\"${fullname_syntax}${srcfile}\",line=\"([expr $line_incr_a_b_a - 2]|[expr $line_incr_a_b_a - 1]|$line_incr_a_b_a)\"\}\r\n$mi_gdb_prompt$" {
|
||||
fail "continue to incr_a (compiler debug info incorrect)"
|
||||
}
|
||||
-re "\\^running\r\n${mi_gdb_prompt}.*\r\n$mi_gdb_prompt$" {
|
||||
fail "continue to incr_a (unknown output)"
|
||||
}
|
||||
timeout {
|
||||
fail "continue to incr_a (timeout)"
|
||||
}
|
||||
}
|
||||
mi_continue_to "incr_a"
|
||||
|
||||
# Test: c_variable-7.81
|
||||
# Desc: Create variables in different scopes
|
||||
|
||||
@ -132,38 +132,18 @@ proc test_watchpoint_triggering {type} {
|
||||
# -exec-continue (Here wp triggers)
|
||||
# -exec-continue (Here wp goes out of scope)
|
||||
|
||||
send_gdb "222-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "222\\^running\r\n$mi_gdb_prompt" {
|
||||
gdb_expect {
|
||||
-re "222\\*stopped,reason=\"watchpoint-trigger\",wpt=\{number=\"2\",exp=\"C\"\},value=\{old=\".*\",new=\"3\"\},thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"callee4\",args=\\\[\\\],file=\".*basics.c\",line=\"$line_callee4_return_0\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "watchpoint trigger"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "watchpoint trigger (2)"}
|
||||
timeout {fail "watchpoint trigger (timeout 2)"}
|
||||
}
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "watchpoint trigger (1)"}
|
||||
timeout {fail "watchpoint trigger (timeout 1)"}
|
||||
}
|
||||
mi_execute_to "exec-continue" "watchpoint-trigger" "callee4" "" \
|
||||
".*basics.c" $line_callee4_return_0 \
|
||||
{"" "wpt=\{number=\"2\",exp=\"C\"\},value=\{old=\".*\",new=\"3\"\}"} \
|
||||
"watchpoint trigger"
|
||||
|
||||
if { $type == "sw" } {
|
||||
setup_xfail *-*-*
|
||||
}
|
||||
send_gdb "223-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "223\\^running\r\n$mi_gdb_prompt" {
|
||||
gdb_expect {
|
||||
-re "\[\r\n\]*223\\*stopped,reason=\"watchpoint-scope\",wpnum=\"2\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"callee3\",args=\\\[.*\\\],file=\".*basics.c\",line=\"$line_callee3_close_brace\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "wp out of scope"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "wp out of scope (2)"}
|
||||
timeout {fail "wp out of scope (timeout 2)"}
|
||||
}
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "wp out of scope (1)"}
|
||||
timeout {fail "wp out of scope (timeout 1)"}
|
||||
}
|
||||
mi_execute_to "exec-continue" "watchpoint-scope" "callee3" ".*" \
|
||||
".*basics.c" $line_callee3_close_brace \
|
||||
{"" "wpnum=\"2\""} \
|
||||
"watchpoint trigger"
|
||||
clear_xfail *-*-*
|
||||
}
|
||||
|
||||
|
||||
@ -798,9 +798,9 @@ proc mi_run_cmd {args} {
|
||||
|
||||
if [target_info exists use_gdb_stub] {
|
||||
if [target_info exists gdb,do_reload_on_run] {
|
||||
send_gdb "000-exec-continue\n";
|
||||
send_gdb "220-exec-continue\n";
|
||||
gdb_expect 60 {
|
||||
-re "000\\^running\[\r\n\]+$mi_gdb_prompt$" {}
|
||||
-re "220\\^running\[\r\n\]+$mi_gdb_prompt$" {}
|
||||
default {}
|
||||
}
|
||||
return;
|
||||
@ -819,9 +819,9 @@ proc mi_run_cmd {args} {
|
||||
return
|
||||
}
|
||||
|
||||
send_gdb "000-exec-run $args\n"
|
||||
send_gdb "220-exec-run $args\n"
|
||||
gdb_expect {
|
||||
-re "000\\^running\r\n${mi_gdb_prompt}" {
|
||||
-re "220\\^running\r\n${mi_gdb_prompt}" {
|
||||
}
|
||||
timeout {
|
||||
perror "Unable to start target"
|
||||
@ -886,30 +886,10 @@ proc mi_runto_helper {func run_or_continue} {
|
||||
if {$run_or_continue == "run"} {
|
||||
mi_run_cmd
|
||||
} else {
|
||||
send_gdb "000-exec-continue\n"
|
||||
gdb_expect {
|
||||
-re "000\\^running\r\n${mi_gdb_prompt}" {
|
||||
}
|
||||
timeout {
|
||||
fail "$test"
|
||||
return -1
|
||||
}
|
||||
}
|
||||
mi_send_resuming_command "exec-continue" "$test"
|
||||
}
|
||||
|
||||
gdb_expect {
|
||||
-re ".*000\\*stopped,thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"$func\",args=\(\\\[.*\\\]\|\{.*\}\),file=\".*\",fullname=\"${fullname_syntax}.*\",line=\"\[0-9\]*\"\}\r\n$mi_gdb_prompt$" {
|
||||
pass "$test"
|
||||
return 0
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {
|
||||
fail "$test (2)"
|
||||
}
|
||||
timeout {
|
||||
fail "$test (timeout)"
|
||||
return -1
|
||||
}
|
||||
}
|
||||
mi_expect_stop "" $func ".*" ".*" "\[0-9\]+" "" $test
|
||||
}
|
||||
|
||||
proc mi_runto {func} {
|
||||
@ -931,32 +911,76 @@ proc mi_step { test } {
|
||||
return [mi_step_to {.*} {.*} {.*} {.*} $test]
|
||||
}
|
||||
|
||||
# cmd should not include the number or newline (i.e. "exec-step 3", not
|
||||
# "220-exec-step 3\n"
|
||||
# Wait for MI *stopped notification to appear.
|
||||
# The REASON, FUNC, ARGS, FILE and LINE are regular expressions
|
||||
# to match against whatever is output in *stopped. ARGS should
|
||||
# not include [] the list of argument is enclosed in, and other
|
||||
# regular expressions should not include quotes.
|
||||
# If EXTRA is a list of one element, it's the regular expression
|
||||
# for output expected right after *stopped, and before GDB prompt.
|
||||
# If EXTRA is a list of two elements, the first element is for
|
||||
# output right after *stopped, and the second element is output
|
||||
# right after reason field. The regex after reason should not include
|
||||
# the comma separating it from the following fields.
|
||||
#
|
||||
# When we fail to match output at all, -1 is returned. Otherwise,
|
||||
# the line at which we stop is returned. This is useful when exact
|
||||
# line is not possible to specify for some reason -- one can pass
|
||||
# the .* regexp for line, and then check the line programmatically.
|
||||
proc mi_expect_stop { reason func args file line extra test } {
|
||||
|
||||
# Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives
|
||||
# after the first prompt is printed.
|
||||
|
||||
proc mi_execute_to_helper { cmd reason func args file line extra test } {
|
||||
global suppress_flag
|
||||
if { $suppress_flag } {
|
||||
return -1
|
||||
}
|
||||
global mi_gdb_prompt
|
||||
global hex
|
||||
global decimal
|
||||
global fullname_syntax
|
||||
send_gdb "220-$cmd\n"
|
||||
|
||||
set after_stopped ""
|
||||
set after_reason ""
|
||||
if { [llength $extra] == 2 } {
|
||||
set after_stopped [lindex $extra 0]
|
||||
set after_reason [lindex $extra 1]
|
||||
set after_reason "${after_reason},"
|
||||
} elseif { [llength $extra] == 1 } {
|
||||
set after_stopped [lindex $extra 0]
|
||||
}
|
||||
|
||||
if { $reason == "exited-normally" } {
|
||||
|
||||
gdb_expect {
|
||||
-re "220\\*stopped,reason=\"exited-normally\"\r\n$mi_gdb_prompt$" {
|
||||
pass "$test"
|
||||
}
|
||||
-re ".*$mi_gdb_prompt$" {fail "continue to end (2)"}
|
||||
timeout {
|
||||
fail "$test (unknown output after running)"
|
||||
}
|
||||
}
|
||||
return
|
||||
}
|
||||
|
||||
set args "\\\[$args\\\]"
|
||||
|
||||
set bn ""
|
||||
if { $reason == "breakpoint-hit" } {
|
||||
set bn {bkptno="[0-9]+",}
|
||||
}
|
||||
|
||||
set r ""
|
||||
if { $reason != "" } {
|
||||
set r "reason=\"$reason\","
|
||||
}
|
||||
|
||||
verbose -log "mi_expect_stop: expecting: .*220\\*stopped,${r}${bn}${after_reason}thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"$func\",args=$args,file=\".*$file\",fullname=\"${fullname_syntax}$file\",line=\"$line\"\}$after_stopped\r\n$mi_gdb_prompt$"
|
||||
gdb_expect {
|
||||
-re "220\\^running\r\n${mi_gdb_prompt}.*220\\*stopped,reason=\"$reason\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"$func\",args=$args,file=\".*$file\",fullname=\"${fullname_syntax}$file\",line=\"$line\"\}$extra\r\n$mi_gdb_prompt$" {
|
||||
-re ".*220\\*stopped,${r}${bn}${after_reason}thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"$func\",args=$args,file=\".*$file\",fullname=\"${fullname_syntax}$file\",line=\"($line)\"\}$after_stopped\r\n$mi_gdb_prompt$" {
|
||||
pass "$test"
|
||||
return 0
|
||||
return $expect_out(2,string)
|
||||
}
|
||||
-re "220\\^running\r\n${mi_gdb_prompt}.*220\\*stopped,reason=\"$reason\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\".*\",args=\[\\\[\{\].*\[\\\]\}\],file=\".*\",fullname=\"${fullname_syntax}.*\",line=\"\[0-9\]*\"\}.*\r\n$mi_gdb_prompt$" {
|
||||
-re ".*220\\*stopped,${r}${bn}${after_reason}thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\".*\",args=\[\\\[\{\].*\[\\\]\}\],file=\".*\",fullname=\"${fullname_syntax}.*\",line=\"\[0-9\]*\"\}.*\r\n$mi_gdb_prompt$" {
|
||||
fail "$test (stopped at wrong place)"
|
||||
return -1
|
||||
}
|
||||
-re "220\\^running\r\n${mi_gdb_prompt}.*\r\n${mi_gdb_prompt}$" {
|
||||
-re ".*\r\n${mi_gdb_prompt}$" {
|
||||
fail "$test (unknown output after running)"
|
||||
return -1
|
||||
}
|
||||
@ -964,12 +988,24 @@ proc mi_execute_to_helper { cmd reason func args file line extra test } {
|
||||
fail "$test (timeout)"
|
||||
return -1
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
# cmd should not include the number or newline (i.e. "exec-step 3", not
|
||||
# "220-exec-step 3\n"
|
||||
|
||||
# Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives
|
||||
# after the first prompt is printed.
|
||||
|
||||
proc mi_execute_to { cmd reason func args file line extra test } {
|
||||
mi_execute_to_helper "$cmd" "$reason" "$func" "\\\[$args\\\]" \
|
||||
"$file" "$line" "$extra" "$test"
|
||||
global suppress_flag
|
||||
if { $suppress_flag } {
|
||||
return -1
|
||||
}
|
||||
|
||||
mi_send_resuming_command "$cmd" "$test"
|
||||
set r [mi_expect_stop $reason $func $args $file $line $extra $test]
|
||||
return $r
|
||||
}
|
||||
|
||||
proc mi_next_to { func args file line test } {
|
||||
@ -1269,8 +1305,16 @@ proc mi_send_resuming_command {command test} {
|
||||
gdb_expect {
|
||||
-re "220\\^running\r\n${mi_gdb_prompt}" {
|
||||
}
|
||||
-re ".*${mi_gdb_prompt}" {
|
||||
fail "$test (failed to resume)"
|
||||
}
|
||||
-re "220\\^error,msg=.*" {
|
||||
fail "$test (MI error)"
|
||||
return -1
|
||||
}
|
||||
timeout {
|
||||
fail $test
|
||||
fail "$test"
|
||||
return -1
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -1286,11 +1330,11 @@ proc mi_continue_to_line {location test} {
|
||||
|
||||
mi_tbreak $location
|
||||
mi_send_resuming_command "exec-continue" "run to $location (exec-continue)"
|
||||
return [mi_wait_for_stop $test]
|
||||
return [mi_get_stop_line $test]
|
||||
}
|
||||
|
||||
# Wait until gdb prints the current line.
|
||||
proc mi_wait_for_stop {test} {
|
||||
proc mi_get_stop_line {test} {
|
||||
|
||||
global mi_gdb_prompt
|
||||
|
||||
@ -1367,7 +1411,7 @@ proc mi_run_inline_test { testcase } {
|
||||
# Start the program afresh.
|
||||
mi_tbreak "$mi_autotest_source:$line"
|
||||
mi_run_cmd
|
||||
set line_now [mi_wait_for_stop "$testcase: step to $line"]
|
||||
set line_now [mi_get_stop_line "$testcase: step to $line"]
|
||||
set first 0
|
||||
} elseif {$line_now!=$line} {
|
||||
set line_now [mi_continue_to_line "$mi_autotest_source:$line" "continue to $line"]
|
||||
@ -1383,7 +1427,7 @@ proc mi_run_inline_test { testcase } {
|
||||
|
||||
# Single-step past the line.
|
||||
mi_send_resuming_command "exec-next" "$testcase: step over $line"
|
||||
set line_now [mi_wait_for_stop "$testcase: step over $line"]
|
||||
set line_now [mi_get_stop_line "$testcase: step over $line"]
|
||||
|
||||
# We probably want to use 'uplevel' so that statements
|
||||
# have direct access to global variables that the
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user