* Rename files for 14-character limits:

gdbserver/remote-gutils.c -> gdbserver/utils.c
	gdbserver/remote-inflow.c -> gdbserver/low-lynx.c
	gdbserver/remote-inflow-sparc.c -> gdbserver/low-sparc.c
	gdbserver/remote-server.c -> gdbserver/server.c
	remote-monitor.c -> remote-mon.c
	* Makefile.in, gdbserver/Makefile.in, config/m68k/monitor.mt:
	Change accordingly.
	* gdbserver/Makefile.in: Remove more junk inherited from gdb Makefile.

gdb/.Sanitize

@@ -188,7 +188,7 @@ remote-es.c
 remote-hms.c
 remote-mips.c
 remote-mm.c
-remote-monitor.c
+remote-mon.c
 remote-nindy.c
 remote-sim.c
 remote-st.c

gdb/ChangeLog

@@ -1,3 +1,15 @@
+Fri Aug 27 09:30:40 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* Rename files for 14-character limits:
+	gdbserver/remote-gutils.c -> gdbserver/utils.c
+	gdbserver/remote-inflow.c -> gdbserver/low-lynx.c
+	gdbserver/remote-inflow-sparc.c -> gdbserver/low-sparc.c
+	gdbserver/remote-server.c -> gdbserver/server.c
+	remote-monitor.c -> remote-mon.c
+	* Makefile.in, gdbserver/Makefile.in, config/m68k/monitor.mt:
+	Change accordingly.
+	* gdbserver/Makefile.in: Remove more junk inherited from gdb Makefile.
+
 Thu Aug 26 14:32:51 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 
 	* infcmd.c, inferior.h (run_stack_dummy): If we stop somewhere

gdb/Makefile.in

@@ -812,7 +812,7 @@ ALLDEPFILES = 29k-share/udi/udip2soc.c 29k-share/udi/udr.c \
 	nindy-share/ttyflush.c nindy-tdep.c \
 	ns32k-pinsn.c paread.c procfs.c pyr-pinsn.c pyr-tdep.c pyr-xdep.c \
 	remote-adapt.c remote-bug.c remote-eb.c remote-es.c remote-hms.c remote-mips.c \
-	remote-mm.c remote-monitor.c remote-nindy.c remote-sim.c remote-st.c \
+	remote-mm.c remote-mon.c remote-nindy.c remote-sim.c remote-st.c \
 	remote-udi.c remote-vx.c remote-z8k.c rs6000-nat.c rs6000-pinsn.c \
 	rs6000-tdep.c ser-go32.c ser-tcp.c sh-tdep.c solib.c sparc-nat.c \
 	sparc-pinsn.c sparc-tdep.c sun3-nat.c sun386-nat.c symm-tdep.c \
@@ -1212,7 +1212,7 @@ remote-mips.o: remote-mips.c $(wait_h) $(defs_h) $(gdbcmd_h) \
 remote-mm.o: remote-mm.c $(bfd_h) $(wait_h) $(defs_h) $(inferior_h) \
 	minimon.h target.h terminal.h
 
-remote-monitor.o: remote-monitor.c $(wait_h) $(command_h) $(defs_h) \
+remote-mon.o: remote-mon.c $(wait_h) $(command_h) $(defs_h) \
 	$(gdbcore_h) monitor.h serial.h target.h
 
 remote-nindy.o: remote-nindy.c $(ieee-float_h) $(wait_h) $(command_h) \

gdb/gdbserver/.Sanitize

@@ -26,17 +26,15 @@ Things-to-keep:
 Makefile.in
 README
 configure.in
-remote-gutils.c
+low-lynx.c
-remote-inflow.c
+low-sparc.c
-remote-server.c
 remote-utils.c
+server.c
 server.h
+utils.c
 
 Things-to-lose:
 
-
-remote-inflow-sparc.c
-
 Do-last:
 
 # End of file.

gdb/gdbserver/Makefile.in

@@ -0,0 +1,284 @@
+#Copyright 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+# This file is part of GDB.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+prefix = /usr/local
+
+program_transform_name =
+exec_prefix = $(prefix)
+bindir = $(exec_prefix)/bin
+libdir = $(exec_prefix)/lib
+tooldir = $(libdir)/$(target_alias)
+
+datadir = $(prefix)/lib
+mandir = $(prefix)/man
+man1dir = $(mandir)/man1
+man2dir = $(mandir)/man2
+man3dir = $(mandir)/man3
+man4dir = $(mandir)/man4
+man5dir = $(mandir)/man5
+man6dir = $(mandir)/man6
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+man9dir = $(mandir)/man9
+infodir = $(prefix)/info
+includedir = $(prefix)/include
+docdir = $(datadir)/doc
+
+SHELL = /bin/sh
+
+INSTALL = install -c
+INSTALL_PROGRAM = $(INSTALL)
+INSTALL_DATA = $(INSTALL)
+
+AR = ar
+AR_FLAGS = qv
+RANLIB = ranlib
+
+# Flags that describe where you can find the termcap library.
+# This can be overridden in the host Makefile fragment file.
+TERMCAP = -ltermcap
+
+# System V: If you compile gdb with a compiler which uses the coff
+# encapsulation feature (this is a function of the compiler used, NOT
+# of the m-?.h file selected by config.gdb), you must make sure that
+# the GNU nm is the one that is used by munch.
+
+# If you are compiling with GCC, make sure that either 1) You use the
+# -traditional flag, or 2) You have the fixed include files where GCC
+# can reach them.  Otherwise the ioctl calls in inflow.c
+# will be incorrectly compiled.  The "fixincludes" script in the gcc
+# distribution will fix your include files up.
+#CC=cc
+#CC=gcc -traditional
+GCC=gcc
+
+# Directory containing source files.  Don't clean up the spacing,
+# this exact string is matched for by the "configure" script.
+srcdir = .
+
+# It is also possible that you will need to add -I/usr/include/sys to the
+# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which 
+# is where it should be according to Posix).
+
+# If you use bison instead of yacc, it needs to include the "-y" argument.
+#BISON=bison -y
+BISON=yacc
+YACC=$(BISON)
+
+# where to find texinfo; GDB dist should include a recent one
+TEXIDIR=${srcdir}/../texinfo
+
+# where to find makeinfo, preferably one designed for texinfo-2
+MAKEINFO=makeinfo
+
+# Set this up with gcc if you have gnu ld and the loader will print out
+# line numbers for undefinded refs.
+#CC-LD=gcc -static
+CC-LD=${CC}
+
+# Where is the "include" directory?  Traditionally ../include or ./include
+INCLUDE_DIR =  ${srcdir}/../../include
+INCLUDE_DEP = $$(INCLUDE_DIR)
+
+# Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
+# or ./mmalloc  (When we want the binary library built from it, we use
+# ${MMALLOC_DIR}${subdir}.)
+# Note that mmalloc can still be used on systems without mmap().
+# To use your system malloc, comment out the following defines.
+MMALLOC_DIR = ${srcdir}/../mmalloc
+MMALLOC_DEP = $$(MMALLOC_DIR)
+# To use your system malloc, uncomment MMALLOC_DISABLE.
+#MMALLOC_DISABLE = -DNO_MMALLOC
+# To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
+#MMALLOC_CHECK = -DNO_MMALLOC_CHECK
+MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
+
+# Where is the source dir for the READLINE library?  Traditionally in .. or .
+# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
+READLINE_DIR = ${srcdir}/../readline
+READLINE_DEP = $$(READLINE_DIR)
+
+# All the includes used for CFLAGS and for lint.
+# -I. for config files.
+# -I${srcdir} possibly for regex.h also.
+# -I${srcdir}/config for more generic config files.
+INCLUDE_CFLAGS = -I. -I${srcdir} -I${srcdir}/.. -I${srcdir}/../config -I$(INCLUDE_DIR)
+
+# M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
+# from the config/ directory.
+GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS}
+#PROFILE_CFLAGS = -pg
+
+# CFLAGS is specifically reserved for setting from the command line
+# when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".
+CFLAGS = -g
+# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
+INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
+LDFLAGS = $(CFLAGS)
+
+# Perhaps should come from parent Makefile
+VERSION = gdbserver-4.9.1
+DIST=gdb
+
+LINT=/usr/5bin/lint
+LINTFLAGS= -I${BFD_DIR}
+
+# Host and target-dependent makefile fragments come in here.
+####
+# End of host and target-dependent makefile fragments
+
+# All source files that go into linking GDB remote server.
+
+SFILES = $(srcdir)/utils.c $(srcdir)/low-lynx.c $(srcdir)/low-sparc.c \
+	 $(srcdir)/server.c $(srcdir)/remote-utils.c
+
+DEPFILES = $(GDBSERVER_DEPFILES)
+
+SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES)
+TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS} 
+
+OBS = utils.o $(GDBSERVER_DEPFILES) server.o remote-utils.o
+
+# Prevent Sun make from putting in the machine type.  Setting
+# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
+.c.o:
+	${CC} -c ${INTERNAL_CFLAGS} $<
+
+all: gdbserver
+
+installcheck:
+check:
+info dvi:
+install-info:
+clean-info:
+
+gdbserver: $(OBS) ${ADD_DEPS} ${CDEPS}
+	${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdbserver $(OBS) \
+	  $(GDBSERVER_LIBS)
+
+config.status:
+	@echo "You must configure gdbserver.  Look at the README file for details."
+	@false
+
+# Put the proper machine-specific files first, so M-. on a machine
+# specific routine gets the one for the correct machine.
+# The xyzzy stuff below deals with empty DEPFILES
+TAGS:	${TAGFILES}
+	etags `find ${srcdir}/config -name $(TM_FILE) -print` \
+	  `find ${srcdir}/config -name ${XM_FILE} -print` \
+	  `find ${srcdir}/config -name ${NAT_FILE} -print` \
+	  `for i in yzzy ${DEPFILES}; do \
+	     if [ x$$i != xyzzy ]; then \
+	       echo ${srcdir}/$$i | sed -e 's/\.o$$/\.c/' ; \
+	     fi; \
+	   done` \
+	  ${TAGFILES}
+tags: TAGS
+
+# Making distributions of GDB and friends.
+
+# Make a tar file containing the GDB directory of the distribution.
+gdb.tar.Z: force_update
+	$(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
+	$(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z
+
+# Make a directory `proto-gdb.dir' that contains an image of the GDB
+# directory of the distribution, built up with symlinks.  Note that this
+# make target is not directly referenced by any other rules in this makefile,
+# it is referenced by the makefile in the parent directory.
+make-proto-gdb.dir: force_update 
+	$(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
+	$(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1
+
+# Set up the GDB source directory for distribution, by building all files that
+# are products of other files.
+setup-to-dist: update-depend force_update
+	../configure none
+	(cd doc; $(MAKE) $(MFLAGS) GDBvn.texi)
+	$(MAKE) $(MFLAGS) gdb.info
+	$(MAKE) $(MFLAGS) refcard.ps
+
+# Update the "depend" and "alldeps.mak" files in a source directory.
+# We update alldeps.mak first, since it is used to generate the list
+# of files to be checked for dependencies.
+update-depend: update-alldeps force_update
+	../configure none -norecursion
+	rm -f depend
+	$(MAKE) $(MFLAGS) depend
+
+# Update the "alldeps.mak" file in a source directory.
+update-alldeps: force_update
+	../configure none -norecursion
+	rm -f alldeps.mak
+	$(MAKE) $(MFLAGS) alldeps.mak
+
+# Build a tar file from a proto-gdb.dir.
+gdb-$(VERSION).tar.Z: force_update
+	rm -f gdb.tar gdb-$(VERSION).tar.Z
+	$(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1
+	ln -s proto-gdb.dir $(DIST)
+	tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z
+	rm -rf $(DIST) proto-gdb.dir
+
+clean:
+	rm -f *.o ${ADD_FILES} *~
+	rm -f init.c version.c
+	rm -f gdbserver core make.log
+
+distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
+	rm -f tm.h xm.h config.status
+	rm -f Makefile
+
+realclean: clean
+	rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
+	rm -f tm.h xm.h config.status
+	rm -f Makefile
+
+STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
+
+Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
+	$(SHELL) ./config.status
+
+force:
+
+version.c: Makefile
+	echo 'char *version = "$(VERSION)";' >version.c
+
+# GNU Make has an annoying habit of putting *all* the Makefile variables
+# into the environment, unless you include this target as a circumvention.
+# Rumor is that this will be fixed (and this target can be removed)
+# in GNU Make 4.0.
+.NOEXPORT:
+
+# GNU Make 3.63 has a different problem: it keeps tacking command line
+# overrides onto the definition of $(MAKE).  This variable setting
+# will remove them.
+MAKEOVERRIDES=
+
+## This is ugly, but I don't want GNU make to put these variables in
+## the environment.  Older makes will see this as a set of targets
+## with no dependencies and no actions.
+unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
+
+server.o : ${srcdir}/server.c ${srcdir}/server.h
+remote-utils.o : ${srcdir}/remote-utils.c ${srcdir}/server.h
+low-lynx.o : ${srcdir}/low-lynx.c ${srcdir}/server.h
+low-sparc.o : $(srcdir)/low-sparc.c $(srcdir)/server.h
+utils.o : ${srcdir}/utils.c ${srcdir}/server.h
+
+# This is the end of "Makefile.in".

gdb/gdbserver/remote-server.c

@@ -1,115 +0,0 @@
-/* Main code for remote server for GDB.
-   Copyright (C) 1989, 1993 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#include "server.h"
-
-main (argc, argv)
-     int argc;
-     char *argv[];
-{
-  char ch, status, own_buf[2000], mem_buf[2000];
-  int i = 0;
-  unsigned char signal;
-  unsigned int mem_addr, len;
-
-  if (setjmp(toplevel))
-    {
-      fprintf(stderr, "Exiting\n");
-      exit(1);
-    }
-
-  if (argc < 3)
-    error("Usage: gdbserver tty prog [args ...]");
-
-  inferior_pid = create_inferior (argv[2], &argv[2]);
-  fprintf (stderr, "Process %s created; pid = %d\n", argv[2], inferior_pid);
-
-  signal = mywait (&status);	/* Wait till we are at 1st instr in prog */
-
-  /* We are now stopped at the first instruction of the target process */
-
-  while (1)
-    {
-      remote_open (argv[1]);
-
-      setjmp(toplevel);
-      while (getpkt (own_buf) > 0)
-	{
-	  i = 0;
-	  ch = own_buf[i++];
-	  switch (ch)
-	    {
-	    case '?':
-	      prepare_resume_reply (own_buf, status, signal);
-	      break;
-	    case 'g':
-	      convert_int_to_ascii (registers, own_buf, REGISTER_BYTES);
-	      break;
-	    case 'G':
-	      convert_ascii_to_int (&own_buf[1], registers, REGISTER_BYTES);
-	      store_inferior_registers (-1);
-	      write_ok (own_buf);
-	      break;
-	    case 'm':
-	      decode_m_packet (&own_buf[1], &mem_addr, &len);
-	      read_inferior_memory (mem_addr, mem_buf, len);
-	      convert_int_to_ascii (mem_buf, own_buf, len);
-	      break;
-	    case 'M':
-	      decode_M_packet (&own_buf[1], &mem_addr, &len, mem_buf);
-	      if (write_inferior_memory (mem_addr, mem_buf, len) == 0)
-		write_ok (own_buf);
-	      else
-		write_enn (own_buf);
-	      break;
-	    case 'c':
-	      myresume (0, 0);
-	      signal = mywait (&status);
-	      prepare_resume_reply (own_buf, status, signal);
-	      break;
-	    case 's':
-	      myresume (1, 0);
-	      signal = mywait (&status);
-	      prepare_resume_reply (own_buf, status, signal);
-	      break;
-	    case 'k':
-	      fprintf (stderr, "Killing inferior\n");
-	      kill_inferior ();
-	      inferior_pid = create_inferior (argv[2], &argv[2]);
-	      fprintf (stderr, "Process %s created; pid = %d\n", argv[2],
-		       inferior_pid);
-	      signal = mywait (&status); /* Wait till we are at 1st instr in prog */
-	      break;
-	    default:
-	      printf ("\nUnknown option chosen by master\n");
-	      write_enn (own_buf);
-	      break;
-	    }
-
-	  putpkt (own_buf);
-	}
-
-      /* We come here when getpkt fails.  Close the connection, and re-open it
-         at the top of the loop.  */
-
-      fprintf (stderr, "Remote side has terminated connection.  GDBserver will reopen the connection.\n");
-
-      remote_close ();
-    }
-}