The SME (Scalable Matrix Extension) [1] exposes a new matrix register ZA with
variable sizes. It also exposes a new mode called streaming mode.
Similarly to SVE, the ZA register size is dictated by a vector length, but the
SME vector length is called streaming vetor length. The total size for
ZA in a given moment is svl x svl.
In streaming mode, the SVE registers have their sizes based on svl rather than
the regular vector length (vl).
The feature detection is controlled by the HWCAP2_SME bit, but actual support
should be validated by attempting a ptrace call for one of the new register
sets: NT_ARM_ZA and NT_ARM_SSVE.
Due to its large size, the ZA register is exposed as a vector of bytes, but we
introduce a number of pseudo-registers that gives various different views
into the ZA contents. These can be arranged in a couple categories: tiles and
tile slices.
Tiles are matrices the same size or smaller than ZA. Tile slices are vectors
which map to ZA's rows/columns in different ways.
A new dynamic target description is provided containing the ZA register, the SVG
register and the SVCR register. The size of ZA, like the SVE vector registers,
is based on the vector length register SVG (VG for SVE).
This patch enables SME register support for gdb.
[1] https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/scalable-matrix-extension-armv9-a-architecture
Co-Authored-By: Ezra Sitorus <ezra.sitorus@arm.com>
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
In preparation to the SME support patches, rename the SVE-specific files to
something a bit more meaningful that can be shared with the SME code.
In this case, I've renamed the "sve" in the names to "scalable".
No functional changes.
Regression-tested on aarch64-linux Ubuntu 22.04/20.04.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Make x86_xcr0 private to i387-fp.cc and use i387_set_xsave_mask to set
the value instead. Add a static global instance of x86_xsave_layout
and initialize it in the new function as well to be used in a future
commit to parse XSAVE extended state regions.
Update the Linux port to use this function rather than setting
x86_xcr0 directly. In the case that XML is not supported, don't
bother setting x86_xcr0 to the default value but just omit the call to
i387_set_xsave_mask as i387-fp.cc defaults to the SSE case used for
non-XML.
In addition, use x86_xsave_length to determine the size of the XSAVE
register set via CPUID.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Add new files:
gdb/arch/csky.c
gdb/arch/csky.h
gdb/features/cskyv2-linux.c
gdbserver/linux-csky-low.cc
1. In gdb/arch/csky.c file, add function "csky_create_target_description()"
for csky_target::low_arch_setup(). later, it can be used for csky native gdb.
2. In gdb/features/cskyv2-linux.c file, create target_tdesc for csky, include
gprs, pc, hi, lo, float, vector and float control registers.
3. In gdbserver/linux-csky-low.cc file, using PTRACE_GET/SET_RGESET to
get/set registers. The main data structures in asm/ptrace.h are:
struct pt_regs {
unsigned long tls;
unsigned long lr;
unsigned long pc;
unsigned long sr;
unsigned long usp;
/*
* a0, a1, a2, a3:
* r0, r1, r2, r3
*/
unsigned long orig_a0;
unsigned long a0;
unsigned long a1;
unsigned long a2;
unsigned long a3;
/*
* r4 ~ r13
*/
unsigned long regs[10];
/* r16 ~ r30 */
unsigned long exregs[15];
unsigned long rhi;
unsigned long rlo;
unsigned long dcsr;
};
struct user_fp {
unsigned long vr[96];
unsigned long fcr;
unsigned long fesr;
unsigned long fid;
unsigned long reserved;
};
Implement LoongArch/Linux support, including XML target description
handling based on features determined, GPR regset support, and software
breakpoint handling.
In the Linux kernel code of LoongArch, ptrace implements PTRACE_POKEUSR
and PTRACE_PEEKUSR in the arch_ptrace function, so srv_linux_usrregs is
set to yes.
With this patch on LoongArch:
$ make check-gdb TESTS="gdb.server/server-connect.exp"
[...]
# of expected passes 18
[...]
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Move non-Linux-specific support for hardware break/watchpoints from
nat/aarch64-linux-hw-point.c to nat/aarch64-hw-point.c. Changes
beyond a simple split of the code are:
- aarch64_linux_region_ok_for_watchpoint and
aarch64_linux_any_set_debug_regs_state renamed to drop linux_ as
they are not platform specific.
- Platforms must implement the aarch64_notify_debug_reg_change
function which is invoked from the platform-independent code when a
debug register changes for a given debug register state. This does
not use the indirection of a 'low' structure as is done for x86.
- The handling for kernel_supports_any_contiguous_range is not
pristine. For non-Linux it is simply defined to true. Some uses of
this could perhaps be implemented as new 'low' routines for the
various places that check it instead?
- Pass down ptid into aarch64_handle_breakpoint and
aarch64_handle_watchpoint rather than using current_lwp_ptid which
is only defined on Linux. In addition, pass the ptid on to
aarch64_notify_debug_reg_change instead of the unused state
argument.
This patch adds gdbserver support for OpenRISC. This has been used for
debugging the glibc port that in being worked on here:
https://github.com/openrisc/or1k-glibc/tree/or1k-port-2
Hence the comment about registers definitions being inline with glibc.
Adds the AArch64-specific memory tagging support (MTE) by implementing the
required hooks and checks for GDBserver.
gdbserver/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* Makefile.in (SFILES): Add /../gdb/nat/aarch64-mte-linux-ptrace.c.
* configure.srv (aarch64*-*-linux*): Add arch/aarch64-mte-linux.o and
nat/aarch64-mte-linux-ptrace.o.
* linux-aarch64-low.cc: Include nat/aarch64-mte-linux-ptrace.h.
(class aarch64_target) <supports_memory_tagging>
<fetch_memtags, store_memtags>: New method overrides.
(aarch64_target::supports_memory_tagging)
(aarch64_target::fetch_memtags)
(aarch64_target::store_memtags): New methods.
This gdbserver implementation supports ARC ABI v3 and v4 (older ARC ABI
versions are not supported by other modern GNU tools or Linux itself).
Gdbserver supports inspection of ARC HS registers R30, R58 and R59 - feature
that has been added to Linux 4.12. Whether gdbserver build will actually
support this feature depends on the version of Linux headers used to build
the server.
v2 [1]:
- Use "this->read_memory ()" instead of "the_target->read_memory ()".
- Remove the unnecessary "arch-arc.o:" target from the "Makefile.in".
- Got rid of "ntohs()" function and added lots of comments about
endianness.
- Clarify why "pc" value is read from and saved to different fields
in user regs struct.
- In function "is_reg_name_available_p()", use a range-based iterator
to loop over the registers.
- Removed mentioning of issue number that was not related to sourceware.
- A few typo's fixed.
[1] Remarks
https://sourceware.org/pipermail/gdb-patches/2020-September/171911.htmlhttps://sourceware.org/pipermail/gdb-patches/2020-September/171919.html
gdbserver/ChangeLog:
* configure.srv: Support ARC architecture.
* Makefile.in: Add linux-arc-low.cc and arch/arc.o.
* linux-arc-low.cc: New file.
The support is on par with NetBSD/amd64, thus GPR works,
single step and software breakpoint are operational, and the
SVR4 r_debug integration is functional.
gdbserver/ChangeLog:
* netbsd-aarch64-low.cc: Add.
* Makefile.in (SFILES): Register "netbsd-aarch64-low.c".
* configure.srv: Add aarch64*-*-netbsd*.
The support is on part with NetBSD/amd64, thus GPR works,
single step and software breakpoint are operational, and the
SVR4 r_debug integration is functional.
gdbserver/ChangeLog:
* netbsd-i386-low.cc: Add.
* Makefile.in (SFILES): Register "netbsd-i386-low.c".
* configure.srv: Add i[34567]86-*-netbsd*.
This port has been unmaintained for years and the upstream Linux kernel
does not support this architecture anymore, remove it.
gdbserver/ChangeLog:
* Makefile.in (SFILES): linux-tile-low.cc.
* configure.srv: Remove tilegx case.
* linux-tile-low.cc: Remove.
Change-Id: I1c2910d04ddbd6013e5d228047106b41d80f9477
This port has been unmaintained for years and the upstream Linux kernel
does not support this architecture anymore, remove it.
gdbserver/ChangeLog:
* Makefile.in (SFILES): Remove linux-m32r-low.cc.
* configure.srv: Remove m32r case.
* linux-m32r-low.cc: Remove.
Change-Id: I5617b2b1fd92aeec19b38e0e3c0b78adaafdb35b
This port has been unmaintained for years and the upstream Linux kernel
does not support this architecture anymore, remove it.
gdbserver/ChangeLog:
* Makefile.in (SFILES): Remove linux-cris-low.c.
* configure.srv: Remove cris cases.
* linux-cris-low.cc, linux-crisv32-low.cc: Remove.
Change-Id: Ib3ff436b03373548215f15540a47f39cbec5f512
This port has been unmaintained for years and the upstream Linux kernel
does not support this architecture anymore, remove it.
gdbserver/ChangeLog:
* Makefile.in (SFILES): Remove linux-bfin-low.c.
* configure.srv: Remove bfin case.
* linux-bfin-low.cc: Remove.
* linux-low.cc: Remove BFIN-conditional code.
Change-Id: I846310d15e6386118ec7eabb1b87e647174560fb
This port has been unmaintained for years, remove it.
gdbserver/ChangeLog:
* configure: Re-generate.
* configure.ac: Remove srv_qnx test.
* configure.srv: Remove nto case.
* nto-low.cc, nto-low.h, nto-x86-low.cc: Remove.
* remote-utils.c: Remove __QNX__-guarded code.
Change-Id: I8a1ad9c740a69352da1f6993778dbf951eebb22f
This port has been unmaintained for years, remove it.
gdbserver/ChangeLog:
* configure: Re-generate.
* configure.ac: Remove srv_lynxos test.
* configure.srv: Remove lynxos cases.
* lynx-i386-low.cc, lynx-low.cc, lynx-low.h, lynx-ppc-low.c:
Remove.
Change-Id: I239d1cf1fc7b4c7a174251bc7981707eaba7d972
This adds "suspend" and "resume" methods to windows_thread_info, and
changes gdb and gdbserver to share this code.
gdb/ChangeLog
2020-04-08 Tom Tromey <tromey@adacore.com>
* windows-nat.c (thread_rec): Use windows_thread_info::suspend.
(windows_continue): Use windows_continue::resume.
* nat/windows-nat.h (struct windows_thread_info) <suspend,
resume>: Declare new methods.
* nat/windows-nat.c: New file.
* configure.nat (NATDEPFILES): Add nat/windows-nat.o when needed.
gdbserver/ChangeLog
2020-04-08 Tom Tromey <tromey@adacore.com>
* win32-low.c (win32_require_context, suspend_one_thread): Use
windows_thread_info::suspend.
(continue_one_thread): Use windows_thread_info::resume.
* configure.srv (srv_tgtobj): Add windows-nat.o when needed.
Implement RISC-V/Linux support for both RV64 and RV32 systems, including
XML target description handling based on features determined, GPR and
FPR regset support including dynamic sizing of the latter, and software
breakpoint handling. Define two NT_FPREGSET regsets of a different size
matching the FPR sizes supported for generic `gdbserver' code to pick
from according to what the OS supplies.
Also handle a glibc bug where ELF_NFPREG is defined in terms of NFPREG,
however NFPREG is nowhere defined.
2020-02-19 Maciej W. Rozycki <macro@wdc.com>
Andrew Burgess <andrew.burgess@embecosm.com>
gdb/
* NEWS: Mention RISC-V GNU/Linux GDBserver support.
gdbserver/
* linux-riscv-low.cc: New file.
* Makefile.in (SFILES): Add linux-riscv-low.cc, arch/riscv.c,
and nat/riscv-linux-tdesc.c.
* configure.srv <riscv*-*-linux*> (srv_tgtobj)
(srv_linux_regsets, srv_linux_usrregs, srv_linux_thread_db):
Define.
Correct fallout from commit 919adfe84092 ("Move gdbserver to top level")
and revert to not building `gdbserver' in a cross-configuration, that is
where host != target, matching the documented behaviour. We have no way
to support non-native `gdbserver', and native `gdbserver' is usually of
no use with cross-GDB of the chosen host.
gdbserver/ChangeLog:
2020-02-12 Maciej W. Rozycki <macro@wdc.com>
Pedro Alves <palves@redhat.com>
Skip building gdbserver in a cross-configuration.
* configure.srv: Set $gdbserver_host depending on whether $target
is $host. Use $gdbserver_host instead of $host.
This patch moves gdbserver to the top level.
This patch is as close to a pure move as possible -- gdbserver still
builds its own variant of gnulib and gdbsupport. Changing this will
be done in a separate patch.
[v2] Note that, per Simon's review comment, this patch changes the
tree so that gdbserver is not built for or1k or score. This makes
sense, because there is apparently not actually a gdbserver port here.
[v3] This version of the patch also splits out some configury into a
new file, gdbserver/configure.host, so that the top-level configure
script can simply rely on it in order to decide whether gdbserver
should be built.
[v4] This version adds documentation and removes some unnecessary
top-level dependencies.
[v5] Update docs to mention "make all-gdbserver" and change how
top-level configure decides whether to build gdbserver, switching to a
single, shared script.
Tested by the buildbot.
ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver.
* gdbserver: New directory, moved from gdb/gdbserver.
* configure.ac (host_tools): Add gdbserver.
Only build gdbserver on certain systems.
* Makefile.in, configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gdbserver.
* MAINTAINERS: Add gdbserver.
gdb/ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
* README: Update gdbserver documentation.
* gdbserver: Move to top level.
* configure.tgt (build_gdbserver): Remove.
* configure.ac: Remove --enable-gdbserver.
* configure: Rebuild.
* Makefile.in (distclean): Don't mention gdbserver.
Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
