Move these options up to the common dir so we only test & export
them once across all ports.
The ppc code needs a little extra care with its trace settings as
it's not exactly the same API as the common code. The other knobs
are the same though.
Since ppc now shares a config.h with the top-level, move all of its
relevant settings up a level. The ppc port tests a lot more funcs,
but that's because its syscall emulation is a lot more complete.
We'll probably utilize some of these in the common code too.
The ppc port doesn't share a lot of the common logic, but there are
a few bits that bleed across. Have it use the common configure for
environment settings too to avoid duplicate define errors after the
recent unification with the other ports.
Move the various platform tests up a level to avoid duplication
across the ports. When building multiple versions, this speeds
things up a bit.
For now we move the obvious stuff up a level, but we don't turn
own the config.h entirely just yet -- we still have some tests
related to libraries that need consideration.
Allow ports to initialize the callback endian if they want. This will
allow delegation of the logic out of common code in the future.
Also switch from the CURRENT_TARGET_BYTE_ORDER macro to the underlying
current_target_byte_order storage since the latter has been setup by
the sim-config module based on the same macros. This will allow the
nrun module to be moved to common building for sharing.
This function has done only one thing: post-process command line
settings to see if profiling or tracing has been enabled, and if
so, set the run_fast_p flag in the simulator state. That flag is
only used in one place: to select the fast or slow cgen engine.
By inlining the run_fast_p logic to the one place it's used, we
can delete a good amount of logic specific to cgen ports: both
the call to cgen_init and the conditional simulator state. This
in turn allows us to have a single simulator state struct across
all ports so we can share objects more between them, and makes
the sim_open calls look more consistent.
Separate the name of the igen program from the options used to run it.
This allows us to avoid duplicating ../igen/igen in Makefiles and reuse
the existing setting in the common Makefile. This also allows us to
easily harmonize the use of EXEEXT between igen/local.mk and the common
makefiles when cross-compiling for e.g. Windows.
This provides a space to generate things that we only need to build
once per-arch. Some day that will be all of common/, but for now,
we move the version.c management in.
gnulib can override stdio.h and/or stdlib.h in which case the gnulib
headers require config.h to be included first.
gdb/sim/m32c/ChangeLog:
* m32c.opc: Include defs.h.
* r8c.opc: Likewise.
If the OS headers define the "errno" symbol, it breaks some of these
funcs that were using "int errno" itself. Rename local vars to "err"
to avoid that, and delete the old "extern int errno".
The execv prototypes on Windows via mingw64 include extra const
markings on the argv/envp pointers than what POSIX specifies.
Cast them to void* as a hack to get it working on all platforms.
This is a bit of a hack, but it matches the hack we use in other
places in the sim currently. This fixes building for e.g. Windows.
The signal fallback logic needs a bit of love in general at some
point across all sim code.
Some modules might require extra linking depending on the platform
(e.g. Windows might need -lws2_32), so include the existing extra
gnulib libs setting.
All other cgen ports keep their generated desc & opc files under
opcodes/, so move the cris files over too. The cris-opc.c file,
while not generated, is already here to complement.
The cleanup to use BFD_VMA_FMT also adjusted this line, but used the
incorrect format: while BFD_VMA_FMT needs an explicit "x", PRIx32 does
not, so the spurious "x" here confused the parser and broke execution.
I misread the code and thought data0/... were bu64 when they were
actually bu32. Fix the call to assemble the 2 64-bit values instead
of passing the 2 halves of the first 64-bit value.
The bfin_otp_write_page_val func wants a pointer to an bu64[2] array,
but this code passes it a pointer to a single bu64. It's in a struct
with a known compatible layout:
bu64 data0, data1, data2, data3;
But gcc doesn't allow these kinds of tricks anymore. Use the more
verbose form to make the compiler happy since this is not performance
sensitive code.
32-bit MIPS programs run on the 64-bit simulator model in 64-bit
sign-extended space. The mapping from 64-bit sign-extended addresses to
32-bit addresses was removed by commit
26f8bf63bf36f9062a5cc1afacf71462a4abe0c8, breaking the 64-bit simulator
model. Add shadow mappings from 64-bit sign extended address space to
32-bit address spaces, in lieu of the AddressTranslation function.
2021-05-04 Faraz Shahbazker <fshahbazker@wavecomp.com>
sim/mips/ChangeLog:
* interp.c (sim_open): Add shadow mappings from 32-bit
address space to 64-bit sign-extended address space.
64-bit BFD for MIPS applies a standard sign extension on all addresses
assuming 64-bit target. These bits are required for 64-bit and can only
be safely truncated for 32-bit target models. This partially reverts commit
b36d953bced0a4fecdde1823abac70ed7038ee95
The sign-extension logic modeled by BFD is an integral part of the
MIPS64 architecture spec. It appears in the virtual address map, where
sign extension allows for 32-bit compatibility segments [1] with 64-bit
addressing. Truncating these addresses prematurely (commit
models (-DWITH_TARGET_WORD_BITSIZE=64).
In the ISA itself, direct addressing (Load-Upper-Immediate) and indirect
addressing (Load-Word) both automatically sign-extend their results. These
instructions regenerate the sign-extended addresses even if we don't start
with one (see pr gdb/19447).
Moreover, some instructions like ADD*/SUB* have unpredictable behaviour when
an operand is not correctly sign extended [3]. This affects PC-relative
addressing in particular, so arithmetic on the link-address generated in the
return address register by a jump-and-link is no longer possible, neither is
the use of the PC-relative addressing instructions provided by MIPSR6.
[1] "MIPS64 Architecture for Programmers Volume III: The MIPS64
Privileged Resource Architecture", Document Number: MD00091,
Revision 6.02, December 10, 2015, Section 4.3 "Virtual Address
Spaces", pp. 29-31
https://s3-eu-west-1.amazonaws.com/downloads-mips/documents/MD00091-2B-MIPS64PRA-AFP-06.03.pdf
[2] "MIPS64 Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Reference Manual", Document Number: MD00087,
Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical
List of Instructions", pp. 321
https://s3-eu-west-1.amazonaws.com/downloads-mips/documents/MD00087-2B-MIPS64BIS-AFP-6.06.pdf
[3] "MIPS64 Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Reference Manual", Document Number: MD00087,
Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical
List of Instructions", pp. 56
https://s3-eu-west-1.amazonaws.com/downloads-mips/documents/MD00087-2B-MIPS64BIS-AFP-6.06.pdf
2021-04-23 Faraz Shahbazker <fshahbazker@wavecomp.com>
sim/mips/ChangeLog:
* interp.c (sim_create_inferior): Only truncate sign extension
bits for 32-bit target models
.
clang 11 fails to compile the static assertion as it cannot compute
the pointer value at a compile time:
gdb/sim/d10v/interp.c:1149:37: error: static_assert expression is not an integral constant expression
static_assert ((uintptr_t) &State == (uintptr_t) &State.regs,
~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Instead, assert that the offset of State.regs is 0.
sim/d10v/ChangeLog:
* interp.c (sim_create_inferior): Use offsetof in static
assertion.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
src/sim/ppc/hw_memory.c: In function 'hw_memory_init_address':
src/sim/ppc/hw_memory.c:194:75: error: pointer targets in passing \
argument 4 of 'device_find_integer_array_property' differ in signedness \
[-Werror=pointer-sign]
int nr_cells
= device_find_integer_array_property(me, "available", 0, &dummy);
^
...
Fix this by changing the type of dummy.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
src/sim/ppc/hw_phb.c: In function 'hw_phb_attach_address':
src/sim/ppc/hw_phb.c:315:12: error: comparison between \
'attach_type {aka enum _attach_type}' and \
'enum <anonymous>' [-Werror=enum-compare]
if (type != hw_phb_normal_decode
^~
...
Fix this by casting type to hw_phb_decode.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
src/sim/ppc/emul_netbsd.c: In function 'do_gettimeofday':
src/sim/ppc/emul_netbsd.c:770:16: error: null argument where non-null \
required (argument 1) [-Werror=nonnull]
int status = gettimeofday((t_addr != 0 ? &t : NULL),
^~~~~~~~~~~~
...
Fix this by unconditionally passing &t as first argument.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
In file included from src/sim/ppc/cpu.h:26:0,
from src/sim/ppc/mon.c:25,
from src/sim/ppc/inline.c:64,
from idecode.c:26:
src/sim/ppc/device.h:788:8: error: 'device_event_queue_deschedule' \
declared 'static' but never defined [-Werror=unused-function]
(void) device_event_queue_deschedule
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
This seems to be caused by the fact that the function is declared using
INLINE_EVENT instead of INLINE_DEVICE.
Fix this and a similar error in the same file.
When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
...
In file included from src/sim/ppc/cpu.h:251:0,
from src/sim/ppc/emul_generic.h:24,
from src/sim/ppc/emul_generic.c:24:
src/sim/ppc/cpu.c:76:1: error: 'cpu_create' defined but not used \
[-Werror=unused-function]
cpu_create(psim *system,
^~~~~~~~~~
...
The function is defined as:
...
INLINE_CPU\
(cpu *)
cpu_create(psim *system,
...
which expands to:
...
static cpu * __attribute__((__unused__))
cpu_create(psim *system,
...
The problem is that gcc does not associate the attribute to the function.
I've filed a PR about this ( PR gcc/100670 ), which may or may not be valid.
Work around/fix this by modifying the INLINE_* definitions in inline.h to move
UNUSED to the start such that we have:
...
__attribute__((__unused__)) static cpu *
cpu_create(psim *system,
...
