Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
PR 31106
* elfcode.h (elf_write_relocs): Do not convert a relocation against a zero-value absolute symbol into a relocation without a symbol if the symbol is being used for a complex relocation.
PR 31067
* linker.c (_bfd_generic_link_add_one_symbol): When issuing a warning message, also display a message about the warning not being affected by garbage colleciton.
* ld.texi (Special Sections): New entry in the linker manual. Describes how the .gnu.warning and .gnu.warning.SYM sections behave.
PR 30886 * elf-bfd.h (struct elf_obj_tdata): Add dt_strsz field.
* elf.c (_bfd_elf_get_dynamic_symbols): Add a NUL byte at the end of the string table. Initialise the dt_strsz field. (_bfd_elf_slurp_version_tables): Only free the contents if they were malloc'ed. Add checks before setting string pointers in the dt_strtab buffer.
This reverts commit 8bb23cdbb498ff645bb0937bc8c0cb89e9e5ebd8.
My earlier patch to simplifify the @node uses in the BFD manual didn't
take into account (1) that BFD doesn't use the ordinary texinfo
sectioning commands, and (2) that some users are stuck on very ancient
versions of makeinfo.
This patch reverts the change.
I went through the entire manual using the spacebar, trying to find
the original problem I reported in the change, but couldn't. I don't
know why. Anyway, all this means is that, with this reversion,
editing the node structure will be slightly less convenient.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30703
2023-08-30 Tom Tromey <tom@tromey.com>
PR binutils/30703
* doc/webassembly.texi, doc/bfd.texi: Revert 8bb23cdb, adding
parameters back to @node.
PR 15545 * cache.c (bfd_cache_close_all): Extend description to note that all files will be closed, even those that are not cacheable. Add code to prevent a possible infinite loop.
I noticed a few files double-included libcoff.h, and digging deeper I
found that the PEI_HEADERS define is a sort of external include guard.
This patch adds include guards to the few files in include/coff that
were missing one, and then removes the PEI_HEADERS workaround and the
redundant includes.
I didn't see anything in these files that indicated that
double-inclusion would be useful, so it seems to me that this approach
is ok.
Tested by rebuilding with --enable-targets=all.
2023-08-02 Tom Tromey <tromey@adacore.com>
* pei-x86_64.c (PEI_HEADERS): Do not define.
* pei-loongarch64.c (PEI_HEADERS): Do not define.
* pei-aarch64.c (PEI_HEADERS): Do not define.
* pe-x86_64.c (PEI_HEADERS): Do not define.
* pe-aarch64.c (PEI_HEADERS): Do not define.
* libpei.h (_LIBPEI_H): Add include guard.
* coff-x86_64.c (PEI_HEADERS): Do not check.
* coff-loongarch64.c (PEI_HEADERS): Do not check.
* coff-aarch64.c (PEI_HEADERS): Do not check.
include/ChangeLog
2023-08-02 Tom Tromey <tromey@adacore.com>
* coff/x86_64.h (COFF_X86_64_H): Add include guard.
* coff/loongarch64.h (COFF_LOONGARCH64_H): Add include guard.
* coff/aarch64.h (COFF_AARCH64_H): Add include guard.
bfd
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): If inserting a timestamp, use the value held in the SOURCE_DATE_EPOCH environment variable, if it is defined.
binutils
* doc/binutils.texi (objcopy): Document change in behaviour of objcopy's --preserve-dates command line option.
ld
* pe-dll.c (fill_edata): If inserting a timestamp, use the value held in the SOURCE_DATE_EPOCH environment variable, if it is defined.
* ld.texi (--insert-timestamp): Document change in behaviour.
This patch adds support for the V4 BPF instruction jal/gotol, which is
like ja/goto but it supports a signed 32-bit PC-relative (in number of
64-bit words minus one) target operand instead of the 16-bit signed
operand of the other instruction. This greatly increases the jump
range in BPF programs.
Tested in bpf-unkown-none.
bfd/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* reloc.c: New reloc BFD_RELOC_BPF_DISPCALL32.
* elf64-bpf.c (bpf_reloc_type_lookup): Handle the new reloc.
* libbfd.h (bfd_reloc_code_real_names): Regenerate.
gas/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (struct bpf_insn): New field `id'.
(md_assemble): Save the ids of successfully parsed instructions
and use the new BFD_RELOC_BPF_DISPCALL32 whenever appropriate.
(md_apply_fix): Adapt to the new BFD reloc.
* testsuite/gas/bpf/jump.s: Test JAL.
* testsuite/gas/bpf/jump.d: Likewise.
* testsuite/gas/bpf/jump-pseudoc.d: Likewise.
* testsuite/gas/bpf/jump-be.d: Likewise.
* testsuite/gas/bpf/jump-be-pseudoc.d: Likewise.
* doc/c-bpf.texi (BPF Instructions): Document new instruction
jal/gotol.
Document new operand type disp32.
include/ChangeLog:
2023-07-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/bpf.h (enum bpf_insn_id): Add entry BPF_INSN_JAL.
(enum bpf_insn_id): Remove spurious entry BPF_INSN_CALLI.
opcodes/ChangeLog:
2023-07-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c (bpf_opcodes): Add entry for jal.
For example, objcopy --set-section-flags .data=alloc,large will add
SHF_X86_64_LARGE to the .data section. Omitting "large" will drop the
SHF_X86_64_LARGE flag.
The bfd_section flag is named generically, SEC_ELF_LARGE, in case other
processors want to follow SHF_X86_64_LARGE. SEC_ELF_LARGE has the same
value as SEC_TIC54X_BLOCK used by coff.
bfd/
* section.c: Define SEC_ELF_LARGE.
* bfd-in2.h: Regenerate.
* elf64-x86-64.c (elf_x86_64_section_flags, elf_x86_64_fake_sections,
elf_x86_64_copy_private_section_data): New.
binutils/
* NEWS: Mention the new feature for objcopy.
* doc/binutils.texi: Mention "large".
* objcopy.c (parse_flags): Parse "large".
(check_new_section_flags): Error if "large" is used with a
non-x86-64 ELF target.
* testsuite/binutils-all/x86-64/large-sections.d: New.
* testsuite/binutils-all/x86-64/large-sections.s: New.
* testsuite/binutils-all/x86-64/large-sections-i386.d: New.
* testsuite/binutils-all/x86-64/large-sections-2.d: New.
* testsuite/binutils-all/x86-64/large-sections-2-x32.d: New.
PR 30499
bfd * elflink.c (elf_link_add_object_symbols): Add a message indicating that alignment and size discrepancies between the definition of common symbols and normal symbols are serious and should be investigated.
ld * testsuite/ld-elfcomm/elfcomm.exp: Update regexps to match new output from the linker.
PR 30444
* coffcode.h (coff_write_object_contents): Handle base64 encoding on PE. Also check for too large string table.
* coffgen.c (extract_long_section_name): New function extracted from ... (make_a_section_from_file): ... here. Add support for base64 long section names. (decode_base64): New function.
* libcoff-in.h (struct coff_tdata): Add section_by_index and section_by_target_index hash tables.
* libcoff.h: Regenerate.
* coffcode.h (htab_hash_section_index): New function. (htab_eq_section_index): New function. (htab_hash_section_target_index): New function. (htab_eq_section_target_index): New function. (coff_mkobject_hool): Create the hash tables.
* peicode.h: Add the same new functions. (pe_mkobject_hook): Create the hash tables.
* coff-x86_64.c (coff_amd64_rtype_to_howto): Use the new tables to speed up lookups.
* coffgen.c (coff_section_from_bfd_index): Likewise. (_bfd_coff_close_and_cleanup): Delete the hash tables.
PR 30354
* elf32-arm.c (elf32_arm_gc_mark_extra_sections): If any debug sections are marked then rerun the extra marking in order to pick up any dependencies.
* coffcode.h (coff_read_word_from_buffer): New function.
* coffcode.h (COFF_CHECKSUM_BUFFER_SIZE): New constant.
* coffcode.h (coff_compute_checksum): Improve speed by reducing the number of seeks and reads used.
PR 30142
* peXXigen.c (_bfd_XXi_swap_scnhdr_out): Do not force the .rsrc section to be writeable.
* rescoff.c (write_coff_file): Add the SEC_READONLY flag to the .rsrc section.
--relax enables all relaxations. --no-relax-gp disables GP relaxation to
allow measuring its effect.
The option can test effectiveness of GP relaxation and support some ABI
variants that use GP for other purposes.
Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/issues/298
bfd/
* elfnn-riscv.c (struct riscv_elf_link_hash_table): Add params.
(riscv_elfNN_set_options): New.
(riscv_info_to_howto_rela): Check relax_gp.
(_bfd_riscv_relax_section): Likewise.
* elfxx-riscv.h (struct riscv_elf_params): New.
(riscv_elf32_set_options): New.
(riscv_elf64_set_options): New.
ld/
* emultempl/riscvelf.em: Add option parsing.
* testsuite/ld-riscv-elf/code-model-relax-medlow-01-norelaxgp.d: New.
* testsuite/ld-riscv-elf/pcgp-relax-01-norelaxgp.d: New.
* testsuite/ld-riscv-elf/pcgp-relax-02.d: Test --relax --relax-gp can be
used together.
PR 30150
* dwarf2.c (comp_unit_contains_address): Renamed to ... (comp_unit_may_contain_address): this,
and added code to return true if the CU's ranges have not yet been computed.
(_bfd_dwarf2_find_nearest_line_with_alt): Use the renamed function, simplifying code in the process.
The opening and closing node in BFD starts:
File: bfd.info, [...]
/* Set to N to open the next N BFDs using an alternate id space. */
extern unsigned int bfd_use_reserved_id;
2.13 Opening and closing BFDs
=============================
That is, there's a stray C comment and declaration before any other
text or subsections.
This occurs because the code fragment for bfd_use_reserved_id comes
before the SECTION comment. Hoisting it makes this a little nicer.
2023-02-17 Tom Tromey <tom@tromey.com>
* opncls.c: Hoist the SECTION comment.
I found a few static functions in the BFD manual. These can't be
called by any user of the library, so I don't think it's useful to put
them in the manual. This patch removes the chew markup from their
comments.
2023-02-17 Tom Tromey <tom@tromey.com>
* opncls.c (bfd_get_debug_link_info_1, separate_debug_file_exists)
(separate_alt_debug_file_exists, find_separate_debug_file)
(get_build_id, get_build_id_name, check_build_id_file): Don't use
chew comments.
Currently, if a function description spans a line, the resulting info
can look like this:
-- Function: long bfd_canonicalize_reloc
(bfd *abfd, asection *sec, arelent **loc, asymbol **syms); Call the
back end associated with the open BFD ABFD and translate the
external form of the relocation information attached to SEC into
the internal canonical form. Place the table into memory at LOC,
That is, the function prototype runs together with the text in an ugly
way. This patch fixes this by introducing a new primitive, so that
the generated Texinfo can be a bit nicer. Now this output looks like:
-- Function: long bfd_canonicalize_reloc (bfd *abfd, asection *sec,
arelent **loc, asymbol **syms);
Call the back end associated with the open BFD ABFD and translate
the external form of the relocation information attached to SEC
2023-02-17 Tom Tromey <tom@tromey.com>
* doc/doc.str (SYNOPSIS): Use collapse_whitespace.
* doc/chew.c (collapse_whitespace): New function.
(main): Register collapse_whitespace.
