R_X86_64_converted_reloc_bit is set in elf_x86_64_convert_load_reloc
which is called from elf_x86_64_check_relocs. Since it is used only
internally by linker, there is no need to mask it out in
elf_x86_64_info_to_howto.
* elf64-x86-64.c (elf_x86_64_info_to_howto): Don't mask out
R_X86_64_converted_reloc_bit.
config/plugins.m4 has
if test "$plugins" = "yes"; then
AC_SEARCH_LIBS([dlopen], [dl])
fi
Plugin uses dlsym, but libasan.so only intercepts dlopen, not dlsym:
[hjl@gnu-tools-1 binutils-text]$ nm -D /lib64/libasan.so.4| grep " dl"
0000000000038580 W dlclose
U dl_iterate_phdr
000000000004dc50 W dlopen
U dlsym
U dlvsym
[hjl@gnu-tools-1 binutils-text]$
Testing dlopen for libdl leads to false negative when -fsanitize=address
is used. It results in link failure:
../bfd/.libs/libbfd.a(plugin.o): undefined reference to symbol 'dlsym@@GLIBC_2.16'
dlsym should be used to check if libdl is needed for plugin.
bfd/
PR gas/22318
* configure: Regenerated.
binutils/
PR gas/22318
* configure: Regenerated.
gas/
PR gas/22318
* configure: Regenerated.
gprof/
PR gas/22318
* configure: Regenerated.
ld/
PR gas/22318
* configure: Regenerated.
Do not consider R_PARISC_UNIMPLEMENTED placeholder relocation entries of
the `elf_hppa_howto_table' table valid in `info_to_howto' HPPA handlers.
Instead issue an unsupported relocation type error and return a NULL
howto as with relocations whose number is R_PARISC_UNIMPLEMENTED or
beyond.
bfd/
* elf-hppa.h (elf_hppa_info_to_howto): Also return
unsuccessfully for unimplemented relocations.
(elf_hppa_info_to_howto_rel): Likewise.
Complement commit f3185997ac09 ("PR 22875: Stop strip corrupting unknown
relocs"), <https://sourceware.org/ml/binutils/2018-02/msg00445.html>,
and also set the `bfd_error_bad_value' error and report an unsupported
relocation type if a howto lookup fails with the i860 backend, fixing a
confusing `no error' error message and removing a binutils test failure:
failed with: <.../binutils/strip-new: tmpdir/bintest.o: no error>, expected: <.* bad value>
.../binutils/strip-new: tmpdir/bintest.o: no error
FAIL: binutils-all/strip-13
with the `i860-stardent-elf' target.
bfd/
* elf32-i860.c (lookup_howto): Add `abfd' parameter. Set the
`bfd_error_bad_value' error and call `_bfd_error_handler' on a
howto lookup failure.
(elf32_i860_reloc_type_lookup): Adjust `lookup_howto' call
accordingly.
(elf32_i860_info_to_howto_rela): Likewise.
(elf32_i860_relocate_splitn): Likewise.
(elf32_i860_relocate_pc16): Likewise.
(elf32_i860_relocate_pc26): Likewise.
(elf32_i860_relocate_section): Likewise.
Prevent an out-of-bounds `visium_elf_howto_table' table access in
`visium_info_to_howto_rela' by using the size of the table rather than
R_VISIUM_max to determine the number of entries in the contiguous
regular Visium relocation range defined and described in the table.
bfd/
* elf32-visium.c (visium_info_to_howto_rela): Correct the range
check for `visium_elf_howto_table' table access.
Prevent an out-of-bounds `iq2000_elf_howto_table' table access in
`iq2000_info_to_howto_rela' by using the size of the table rather than
R_IQ2000_max to determine the number of entries in the contiguous
regular IQ2000 relocation range defined and described in the table.
bfd/
* elf32-iq2000.c (iq2000_info_to_howto_rela): Correct the range
check for `iq2000_elf_howto_table' table access.
Prevent an out-of-bounds `elf32_frv_howto_table' table access in
`frv_info_to_howto_rela' by using the size of the table rather than
R_FRV_max to determine the number of entries in the contiguous regular
FRV relocation range defined and described in the table.
bfd/
* elf32-frv.c (frv_info_to_howto_rela): Correct the range check
for `elf32_frv_howto_table' table access.
Do not consider placeholder EMPTY_HOWTO relocation entries valid in
`rtype_to_howto' MIPS handlers. Instead issue an unsupported relocation
type error and return a NULL howto as with relocations outside the three
ISA-specific min-max ranges.
bfd/
* elf32-mips.c (mips_elf32_rtype_to_howto): Also return
unsuccessfully for placeholder howtos.
* elf64-mips.c (mips_elf64_rtype_to_howto): Likewise.
* elfn32-mips.c (mips_elf_n32_rtype_to_howto): Likewise.
Remove a duplicate `unsupported relocation type' message and the setting
of the `bfd_error_bad_value' error from `mips_elf32_rtype_to_howto',
added with commit f3185997ac09 ("PR 22875: Stop strip corrupting unknown
relocs"), <https://sourceware.org/ml/binutils/2018-02/msg00445.html>.
This message is already produced and the `bfd_error_bad_value' error set
by `mips_elf32_rtype_to_howto' before a NULL howto is returned, so there
is no need to repeat these actions here.
bfd/
* elf32-mips.c (mips_info_to_howto_rel): Remove the calls to
`_bfd_error_handler' and to set the `bfd_error_bad_value' error.
Remove ATTRIBUTE_UNUSED annotation from the `abfd' parameter in
`elf_hppa_info_to_howto' now that commit f3185997ac09 ("PR 22875: Stop
strip corrupting unknown relocs"),
<https://sourceware.org/ml/binutils/2018-02/msg00445.html>, made it
used.
bfd/
* elf-hppa.h (elf_hppa_info_to_howto_rel): Remove
ATTRIBUTE_UNUSED from `abfd'.
Call `mips_elf32_rtype_to_howto' directly rather than via the
`->elf_backend_mips_rtype_to_howto' method in the o32 backend,
complementing commit 861fb55ab50a ("Defer allocation of R_MIPS_REL32 GOT
slots"), <https://sourceware.org/ml/binutils/2008-08/msg00096.html>, and
reverting the change to `mips_info_to_howto_rel' originally made with
commit 0a44bf6950b3 ("mips-vxworks support"),
<https://sourceware.org/ml/binutils/2006-03/msg00179.html>.
With `mips_vxworks_rtype_to_howto' gone there is a single backend method
used across all o32 targets, so there in no need for the indirection and
the associated extra cost. This also makes the o32 backend consistent
with the n32 and n64 backends.
bfd/
* elf32-mips.c (mips_info_to_howto_rel): Call
`mips_elf32_rtype_to_howto' directly rather than via
`->elf_backend_mips_rtype_to_howto'.
This patch adds the following relocation support into binutils bfd linker.
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC.
Those relocations includes both ip64 and ilp32 variant.
This patch adds the following relocation support into binutils gas.
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC.
Those relocations includes both ip64 and ilp32 variant.
This is a regression for the corner case of a hidden symbol in a PIC/PIE
binary which is subject to both a new-style GOTDATA relocation and an
old-style GOT relocation. In this case, depending on the link order,
the R_SPARC_RELATIVE dynamic relocation for the GOT slot needed because
of the old-style relocation can be replaced with R_SPARC_NONE coming
from the GOTDATA relocation.
The fix simply records whether an old-style GOT relocation is seen for a
symbol and prevents the R_SPARC_NONE from being generated in this case.
bfd/
* elfxx-sparc.c (struct _bfd_sparc_elf_link_hash_entry): Add new flag
has_old_style_got_reloc.
(_bfd_sparc_elf_check_relocs) <GOT relocations>: Set it for old-style
relocations. Fix a couple of long lines.
(_bfd_sparc_elf_relocate_section) <R_SPARC_GOTDATA_OP>: Do not generate
a R_SPARC_NONE for the GOT slot if the symbol is also subject to
old-style GOT relocations.
ld/
* testsuite/ld-sparc/sparc.exp: Add test for mixed GOTDATA/GOT relocs.
* testsuite/ld-sparc/gotop-hidden.c: New file.
* testsuite/ld-sparc/got-hidden32.s: Likewise.
* testsuite/ld-sparc/got-hidden64.s: Likewise.
* testsuite/ld-sparc/pass.out: Likewise.
The TLSDESC entry in a lazy procedure linkage table is called indirectly
with "callq *(%rax)". This patch adds an ENDBR64 to support indirect
branch tracking in Intel CET. The TLSDESC PLT entry now looks like:
0xf3, 0x0f, 0x1e, 0xfa, /* endbr64 */
0xff, 0x35, 8, 0, 0, 0, /* pushq GOT+8(%rip) */
0xff, 0x25, 16, 0, 0, 0 /* jmpq *GOT+TDG(%rip) */
The BND prefix isn't needed since MPX isn't used for TLSDESC.
bfd/
PR ld/23000
* elf64-x86-64.c (elf_x86_64_finish_dynamic_sections): Add
ENDBR64 to the TLSDESC PLT entry.
ld/
PR ld/23000
* testsuite/ld-x86-64/tlsdesc.pd: Updated.
STT_FILE and a bunch of other symbol types aren't proper symbols to
mark the start of a function's code.
* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Trim uninteresting
symbols. Use size_t counts. Delete redundant opd test.
* elf32-ppc.c (struct ppc_elf_link_hash_entry): Make tls_mask
field unsigned.
(update_local_sym_info): Likewise for local_got_tls_masks.
(ppc_elf_tls_optimize): Likewise for lgot_masks.
Commit f15d0b545b trimmed some unnecessary TPREL relocs, but missed
changing another place where they are allocated.
* elf64-ppc.c (ppc_size_one_stub): Fix comment typo.
(ppc64_elf_layout_multitoc): Allocate relocs for tprel as we
do in size_dynamic_sections.
If a symbol is made dynamic by --dynamic-list, it has non-IR reference.
bfd/
PR ld/22983
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Set
non_ir_ref_dynamic if a symbol is made dynamic by --dynamic-list.
ld/
PR ld/22983
* testsuite/ld-plugin/lto.exp: Run PR ld/22983 test.
* testsuite/ld-plugin/pr22983.d: New file.
* testsuite/ld-plugin/pr22983.t: Likewise.
* testsuite/ld-plugin/pr22983a.c: Likewise.
* testsuite/ld-plugin/pr22983b.c: Likewise.
Linking objects containing jumps targeting the end of a section triggers
assertion in the xlate_offset_with_removed_text. Such jumps may be
generated by a compiler as a dead code and not removed at -O0. Allow
such jumps.
While at it make bsearch argument match comparison function expectations
and use bfd_vma for address fields in the struct xlate_map_entry.
bfd/
2018-03-15 Max Filippov <jcmvbkbc@gmail.com>
* elf32-xtensa.c (xlate_map_entry): Change types of address
fields from 'unsigned' to 'bfd_vma'.
(xlate_offset_with_removed_text): Use struct xlate_map_entry as
the key argument to bsearch. Allow offsets past the end of a
section, use the last map entry for translation of such offsets.
