This patch changes py-framefilter.c as suggested by Pedro in:
https://sourceware.org/ml/gdb-patches/2017-06/msg00748.html
In particular, gdb exceptions are now caught at the outermost layer,
rather than in each particular function. This simplifies much of the
code.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_print_type): Don't catch
exceptions. Return void.
(py_print_value): Likewise.
(py_print_single_arg): Likewise.
(enumerate_args): Don't catch exceptions.
(py_print_args): Likewise.
(py_print_frame): Likewise.
(gdbpy_apply_frame_filter): Catch exceptions here.
PR python/16486 notes that "bt" output is still wrapped differently
when a frame filter is in use. This patch brings it a bit closer by
adding one more wrap_hint call, in a place where stack.c does this as
well.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR python/16486:
* python/py-framefilter.c (py_print_args): Call wrap_hint.
While reading py-framefilter.c, I found one spot where an exception
could be caught but then not be turned into EXT_LANG_BT_ERROR. This
patch fixes this spot.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_print_single_arg): Return
EXT_LANG_BT_ERROR from catch.
If a C-c comes while the Python code for a frame filter is running, it
will be turned into a Python KeyboardException. It seems good for
this to be treated like a GDB quit, so this patch changes
py-framefilter.c to notice this situation and call throw_quit in this
case.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (throw_quit_or_print_exception): New
function.
(gdbpy_apply_frame_filter): Use it.
gdb/testsuite/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* gdb.python/py-framefilter.exp: Add test for KeyboardInterrupt.
* gdb.python/py-framefilter.py (name_error): New global.
(ErrorInName.function): Use name_error.
PR cli/17716 notes that it is difficult to C-c (or "q" at a pagination
prompt) while backtracing using a frame filter. One reason for this
is that many places in py-framefilter.c use RETURN_MASK_ALL in a
try/catch.
This patch changes these spots to use RETURN_MASK_ERROR instead. This
is safe to do because this entire file is exception safe now.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR cli/17716:
* python/py-framefilter.c (py_print_type, py_print_value)
(enumerate_args, py_print_args, gdbpy_apply_frame_filter): Use
RETURN_MASK_ERROR.
This patch removes the last bit of manual resource management from
py-framefilter.c. This will be useful in the next patch.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (enumerate_args): Use
gdb::unique_xmalloc_ptr.
While looking at the frame filter code, I noticed that
EXT_LANG_BT_COMPLETED is not really needed. Semantically there is no
difference between the "completed" and "ok" results. So, this patch
removes this constant.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_print_frame): Return
EXT_LANG_BT_OK.
(gdbpy_apply_frame_filter): Update comment.
* extension.h (enum ext_lang_bt_status) <EXT_LANG_BT_COMPLETED>:
Remove.
<EXT_LANG_BT_NO_FILTERS>: Change value.
When a frame filter elides some frames, they are still printed by
"bt", indented a few spaces. PR backtrace/15582 notes that it would
be nice for users if elided frames could simply be dropped. This
patch adds this capability.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* stack.c (backtrace_command): Parse "hide" argument.
* python/py-framefilter.c (py_print_frame): Handle PRINT_HIDE.
* extension.h (enum frame_filter_flags) <PRINT_HIDE>: New
constant.
gdb/doc/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* gdb.texinfo (Backtrace): Mention "hide" argument.
gdb/testsuite/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* gdb.python/py-framefilter.exp: Add "bt hide" test.
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
This changes frame_filter_flags to use DEF_ENUM_FLAGS_TYPE, and
updates all the uses. It also changes the enum constants to use <<,
as suggested by Sergio.
ChangeLog
2018-02-26 Tom Tromey <tom@tromey.com>
* stack.c (backtrace_command_1): Update.
* python/python-internal.h (gdbpy_apply_frame_filter): Change type
of "flags".
* python/py-framefilter.c (py_print_frame)
(gdbpy_apply_frame_filter): Change type of "flags".
* mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): Change type
of "flags".
(mi_cmd_stack_list_frames, mi_cmd_stack_list_locals)
(mi_cmd_stack_list_args, mi_cmd_stack_list_variables): Update.
* extension.h (enum frame_filter_flag): Rename from
frame_filter_flags.
(frame_filter_flags): Define using DEF_ENUM_FLAGS_TYPE.
(apply_ext_lang_frame_filter): Change type of "flags".
* extension.c (apply_ext_lang_frame_filter): Change type of
"flags".
* extension-priv.h (struct extension_language_ops)
<apply_frame_filter>: Change type of "flags".
PR python/16497 notes that using "bt" with a positive argument prints
the wrong number of frames when a frame filter is in use. Also, in this
case, the non-frame-filter path will print a message about "More stack
frames" when there are more; but this is not done in the frame-filter
case.
The first problem is that backtrace_command_1 passes the wrong value
to apply_ext_lang_frame_filter -- that function takes the final
frame's number as an argument, but backtrace_command_1 passes the
count, which is off by one.
The solution to the second problem is to have the C stack-printing
code stop at the correct number of frames and then print the message.
Tested using the buildbot.
ChangeLog
2018-02-26 Tom Tromey <tom@tromey.com>
PR python/16497:
* stack.c (backtrace_command_1): Set PRINT_MORE_FRAMES flag. Fix
off-by-one in py_end computation.
* python/py-framefilter.c (gdbpy_apply_frame_filter): Handle
PRINT_MORE_FRAMES.
* extension.h (enum frame_filter_flags) <PRINT_MORE_FRAMES>: New
constant.
2018-02-26 Tom Tromey <tom@tromey.com>
PR python/16497:
* gdb.python/py-framefilter.exp: Update test.
The error is triggered by including python-internal.h, and the
error message is:
In file included from d:\usr\lib\gcc\mingw32\6.3.0\include\c++\math.h:36:0,
from build-gnulib/import/math.h:27,
from d:/usr/Python26/include/pyport.h:235,
from d:/usr/Python26/include/Python.h:58,
from python/python-internal.h:94,
from python/py-arch.c:24:
d:\usr\lib\gcc\mingw32\6.3.0\include\c++\cmath:1157:11: error: '::hypot' has not been declared
using ::hypot;
^~~~~
This happens because Python headers define 'hypot' to expand to
'_hypot' in the Windows builds.
gdb/ChangeLog:
2018-01-27 Eli Zaretskii <eliz@gnu.org>
* python/python-internal.h (_hypot) [__MINGW32__]: Define back to
'hypoth'. This avoids a compilation error.
I think that the clone method of xmethod_worker can be removed. It is
only used in find_overload_match, to clone an xmethod we want to
keep. Instead, we can just std::move it out of the vector and into
value_from_xmethod. value_from_xmethod creates a value that will own
the xmethod_worker from that point. Other xmethod_workers left in the
vector will get destroyed when the vector gets destroyed, but the chosen
one will keep living inside the value struct.
gdb/ChangeLog:
* extension.h (struct xmethod_worker) <clone>: Remove.
* python/py-xmethods.c (struct python_xmethod_worker) <clone>:
Remove.
(python_xmethod_worker::clone): Remove.
* valops.c (find_overload_match): Use std::move instead of
clone.
The initial goal of this patch was to remove the usage of
VEC(xmethod_worker_ptr) and corresponding cleanups. I ended up having
to C++ify the xmethod_worker code, to be able to have xmethod_workers
free their data in destructors, and therefore be able to use vectors of
xmethod_worker unique_ptr.
The operations in extension_language_ops that act on one instance of
xmethod_worker (get result type, get args type, invoke) are transformed
to methods of xmethod_worker. xmethod_worker becomes an abstract base
class with virtual pure methods which python_xmethod_worker implements.
The only xmethod-related operation left in extension_language_ops is
get_matching_xmethod_workers, which returns a list of xmethod_workers.
The changes are relatively straightforward, but here are some notes on
things that may raise eyebrows:
- I was not really comfortable with the value_of_xmethod function. At
first it looks like a simple getter, so I considered making it a
method of xmethod_worker. But actually it creates a value and
transfers the ownership of the xmethod_worker to it. It would be a
bit weird and error-prone if calling a method on an object silently
removed the ownership of the object from the caller. To reflect the
behavior more accurately, I renamed it to value_from_xmethod and made
it accept an rvalue-reference (so the caller knows it gives away the
ownership). I noticed the backlink from xmethod_worker to its owning
value was not used, so I removed it.
- Some code, like get_matching_xmethod_workers, made each callee fill
a new vector, which was then merged in the result vector. I think
it's safe if we always pass the same vector around, and each
implementation just appends to it.
- The clone operation does not seem particularly useful, it is removed
in the following patch.
gdb/ChangeLog:
* extension-priv.h (enum ext_lang_rc): Remove, move to extension.h.
(struct extension_language_ops) <clone_xmethod_worker_data>: Remove.
<free_xmethod_worker_data>: Remove.
<get_matching_xmethod_workers>: Chance VEC to std::vector.
<get_xmethod_arg_types>: Remove.
<get_xmethod_result_type>: Remove.
<invoke_xmethod>: Remove.
* extension.c (new_xmethod_worker): Remove.
(clone_xmethod_worker): Remove.
(get_matching_xmethod_workers): Return void, pass std::vector by
pointer.
(get_xmethod_arg_types): Rename to...
(xmethod_worker::get_arg_types): ... this, and adjust.
(get_xmethod_result_type): Rename to...
(xmethod_worker::get_result_type): ... this, and adjust.
(invoke_xmethod): Remove.
(free_xmethod_worker): Remove.
(free_xmethod_worker_vec): Remove.
* extension.h (enum ext_lang_rc): Move here from
extension-priv.h.
(struct xmethod_worker): Add constructor and destructor.
<data>: Remove.
<value>: Remove.
<invoke, clone, do_get_result_type, do_get_arg_types>: New
virtual pure methods.
<get_arg_types, get_result_type>: New methods.
(xmethod_worker_ptr): Remove typedef.
(DEF_VEC_P (xmethod_worker_ptr)): Remove.
(xmethod_worker_vec): Remove typedef.
(xmethod_worker_up): New typedef.
(invoke_xmethod): Remove.
(clone_xmethod_worker): Remove.
(free_xmethod_worker): Remove.
(free_xmethod_worker_vec): Remove.
(get_xmethod_arg_types): Remove.
(get_xmethod_result_type): Remove.
* valops.c (find_method_list): Use std::vector, don't use
intermediate vector.
(value_find_oload_method_list): Use std::vector.
(find_overload_match): Use std::vector.
(find_oload_champ): Use std::vector.
* value.c (value_free): Use operator delete.
(value_of_xmethod): Rename to...
(value_from_xmethod): ... this. Don't assign
xmethod_worker::value, take rvalue-reference.
(result_type_of_xmethod): Adjust.
(call_xmethod): Adjust.
* value.h: Include extension.h.
(struct xmethod_worker): Don't forward-declare.
(value_of_xmethod): Rename to...
(value_from_xmethod): ... this, take rvalue-reference.
* python/py-xmethods.c (struct gdbpy_worker_data): Rename to...
(struct python_xmethod_worker): ... this, add constructor and
destructor.
<invoke, clone, do_get_arg_types, do_get_result_type>: Implement.
(gdbpy_free_xmethod_worker_data): Rename to...
(python_xmethod_worker::~python_xmethod_worker): ... this and
adjust.
(gdbpy_clone_xmethod_worker_data): Rename to...
(python_xmethod_worker::clone): ... this and adjust.
(gdbpy_get_matching_xmethod_workers): Use std::vector, don't use
temporary vector.
(gdbpy_get_xmethod_arg_types): Rename to...
(python_xmethod_worker::do_get_arg_types): ... this and adjust.
(gdbpy_get_xmethod_result_type): Rename to...
(python_xmethod_worker::do_get_result_type): ... this and
adjust.
(gdbpy_invoke_xmethod): Rename to...
(python_xmethod_worker::invoke): ... this and adjust.
(new_python_xmethod_worker): Rename to...
(python_xmethod_worker::python_xmethod_worker): ... this and
adjust.
* python/python-internal.h (gdbpy_clone_xmethod_worker_data):
Remove.
(gdbpy_free_xmethod_worker_data): Remove.
(gdbpy_get_matching_xmethod_workers): Use std::vector.
(gdbpy_get_xmethod_arg_types): Remove.
(gdbpy_get_xmethod_result_type): Remove.
(gdbpy_invoke_xmethod): Remove.
* python/python.c (python_extension_ops): Remove obsolete
callbacks.
In Python 3, the 'p' format specifier can be passed to
PyArg_ParseTupleAndKeywords to test the argument for truth and convert
it to a boolean value (the p stands for predicate). However, it is not
available in Python 2, causing this error:
Traceback (most recent call last):
File "test.py", line 1, in <module>
b1 = gdb.Breakpoint("foo", qualified=False)
TypeError: argument 10 (impossible<bad format char>)
This patch changes it to the 'O' specifier, which returns the Python
object passed in without transformation, and uses PyObject_IsTrue on it.
This is what is done for the other boolean parameters of this function
(internal and temporary).
This fixes the test gdb.python/py-breakpoint.exp for Python 2.
gdb/ChangeLog:
* python/py-breakpoint.c (bppy_init): Use 'O' format specifier
for "qualified" and use PyObject_IsTrue.
This patch adds the possibility to pass a qualified=True|False parameter
when creating a breakpoint in Python. It is equivalent to using
-qualified in a linespec. The parameter actually accepts any Python
value, and converts it to boolean using Python's standard rules for
that (https://docs.python.org/3/library/stdtypes.html#truth).
Unlike the -source/-line/-function/-label parameters, it is possible to
use -qualified with a "normal" (non-explicit) linespec. Therefore, it
is possible (unlike these other parameters) to use this new parameter
along with the spec parameter.
I updated the py-breakpoint.exp test. To be able to test multiple
locations using a namespace, I had to switch the test case to compile as
C++. If we really wanted to, we could run it as both C and C++, but
omit the C++-specific parts when running it as C.
gdb/ChangeLog:
* location.h (string_to_event_location): Add match_type
parameter.
* location.c (string_to_event_location): Likewise.
* python/py-breakpoint.c (bppy_init): Handle qualified
parameter.
gdb/doc/ChangeLog:
* python.texi (Manipulating breakpoints using Python): Document
qualified parameter to gdb.Breakpoint.
gdb/testsuite/ChangeLog:
* gdb.python/py-breakpoint.c (foo_ns::multiply): New function.
* gdb.python/py-breakpoint.exp: Compile the test case as c++,
call test_bkpt_qualified.
(test_bkpt_qualified): New proc.
This introduces several new keywords to the bppy_init constructor.
The spec parameter is now optional but mutually exclusive to the
explicit keywords source, label, function and line.
gdb/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* python/py-breakpoint.c (bppy_init): Use string_to_event_location
over basic location code. Implement explicit location keywords.
(bppy_init_validate_args): New function.
* NEWS: Document Python explicit breakpoint locations.
doc/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* python.texi (Breakpoints In Python): Add text relating
to allowed explicit locations and keywords in gdb.Breakpoints.
testsuite/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp (test_bkpt_explicit_loc): Add new
tests for explicit locations.
This patch teaches GDB about setting breakpoints in all scopes
(namespaces and classes) by default.
Here's a contrived example:
(gdb) b func<tab>
(anonymous namespace)::A::function() Bn::(anonymous namespace)::B::function() function(int, int)
(anonymous namespace)::B::function() Bn::(anonymous namespace)::function() gdb::(anonymous namespace)::A::function()
(anonymous namespace)::B::function() const Bn::(anonymous namespace)::function(int, int) gdb::(anonymous namespace)::function()
(anonymous namespace)::function() Bn::B::func() gdb::(anonymous namespace)::function(int, int)
(anonymous namespace)::function(int, int) Bn::B::function() gdb::A::func()
A::func() Bn::func() gdb::A::function()
A::function() Bn::function() gdb::func()
B::func() Bn::function(int, int) gdb::function()
B::function() Bn::function(long) gdb::function(int, int)
B::function() const func() gdb::function(long)
B::function_const() const function()
(gdb) b function
Breakpoint 1 at 0x4005ce: function. (26 locations)
(gdb) b B::function<tab>
(anonymous namespace)::B::function() B::function() const Bn::B::function()
(anonymous namespace)::B::function() const B::function_const() const
B::function() Bn::(anonymous namespace)::B::function()
(gdb) b B::function
Breakpoint 1 at 0x40072c: B::function. (6 locations)
To get back the original behavior of interpreting the function name as
a fully-qualified name, you can use the new "-qualified" (or "-q")
option/flag (added by this commit). For example:
(gdb) b B::function
(anonymous namespace)::B::function() B::function() const Bn::B::function()
(anonymous namespace)::B::function() const B::function_const() const
B::function() Bn::(anonymous namespace)::B::function()
vs:
(gdb) b -qualified B::function
B::function() B::function() const B::function_const() const
I've chosen "-qualified" / "-q" because "-f" (for "full" or
"fully-qualified") is already taken for "-function".
Note: the "-qualified" option works with both linespecs and explicit
locations. I.e., these are equivalent:
(gdb) b -q func
(gdb) b -q -f func
and so are these:
(gdb) b -q filename.cc:func
(gdb) b -q -s filename.cc -f func
(gdb) b -s filename.cc -q -f func
(gdb) b -s filename.cc -f func -q
To better understand why I consider wild matching the better default,
consider what happens when we get to the point when _all_ of GDB is
wrapped under "namespace gdb {}". I have a patch series that does
that, and when I started debugging that GDB, I immediately became
frustrated. You'd have to write "b gdb::internal_error", "b
gdb::foo", "b gdb::bar", etc. etc., which gets annoying pretty
quickly. OTOH, consider how this makes it very easy to set
breakpoints in classes wrapped in anonymous namespaces. You just
don't think of them, GDB finds the symbols for you automatically.
(At the Cauldron a couple months ago, several people told me that they
run into a similar issue when debugging other C++ projects. One
example was when debugging LLVM, which puts all its code under the
"llvm" namespace.)
Implementation-wise, what the patch does is:
- makes C++ symbol name hashing only consider the last component of
a symbol name. (so that we can look up symbol names by
last-component name only).
- adds a C++ symbol name matcher for symbol_name_match_type::WILD,
which ignores missing leading specifiers / components.
- adjusts a few preexisting testsuite tests to use "-qualified" when
they mean it.
- adds new testsuite tests.
- adds unit tests.
Grows the gdb.linespec/ tests like this:
-# of expected passes 7823
+# of expected passes 8977
gdb/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* NEWS: Mention that breakpoints on C++ functions are now set on
on all namespaces/classes by default, and mention "break
-qualified".
* ax-gdb.c (agent_command_1): Adjust to pass a
symbol_name_match_type to new_linespec_location.
* breakpoint.c (parse_breakpoint_sals): Adjust to
get_linespec_location's return type change.
(strace_marker_create_sals_from_location): Adjust to pass a
symbol_name_match_type to new_linespec_location.
(strace_marker_decode_location): Adjust to get_linespec_location's
return type change.
(strace_command): Adjust to pass a symbol_name_match_type to
new_linespec_location.
(LOCATION_HELP_STRING): Add paragraph about wildmatching, and
mention "-qualified".
* c-lang.c (cplus_language_defn): Install cp_search_name_hash.
* completer.c (explicit_location_match_type::MATCH_QUALIFIED): New
enumerator.
(complete_address_and_linespec_locations): New parameter
'match_type'. Pass it down.
(explicit_options): Add "-qualified".
(collect_explicit_location_matches): Pass the requested match type
to the linespec completers. Handle MATCH_QUALIFIED.
(location_completer): Handle "-qualified" combined with linespecs.
* cp-support.c (cp_search_name_hash): New.
(cp_symbol_name_matches_1): Implement wild matching for C++.
(cp_fq_symbol_name_matches): Reimplement.
(cp_get_symbol_name_matcher): Return different matchers depending
on the lookup name's match type.
(selftests::test_cp_symbol_name_matches): Add wild matching tests.
* cp-support.h (cp_search_name_hash): New declaration.
* dwarf2read.c
(selftests::dw2_expand_symtabs_matching::test_symbols): Add
symbols.
(test_dw2_expand_symtabs_matching_symbol): Add wild matching
tests.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Adjust to
pass a symbol_name_match_type to new_linespec_location.
* linespec.c (linespec_parse_basic): Lookup function symbols using
the parser's symbol name match type.
(convert_explicit_location_to_linespec): New
symbol_name_match_type parameter. Pass it down to
find_linespec_symbols.
(convert_explicit_location_to_sals): Pass the location's name
match type to convert_explicit_location_to_linespec.
(parse_linespec): New match_type parameter. Save it in the
parser.
(linespec_parser_new): Default to symbol_name_match_type::WILD.
(linespec_complete_function): New symbol_name_match_type
parameter. Use it.
(complete_linespec_component): Pass down the parser's recorded
name match type.
(linespec_complete_label): New symbol_name_match_type parameter.
Use it.
(linespec_complete): New symbol_name_match_type parameter. Save
it in the parser and pass it down. Adjust to
get_linespec_location's prototype change.
(find_function_symbols, find_linespec_symbols): New
symbol_name_match_type parameter. Pass it down instead of
assuming symbol_name_match_type::WILD.
* linespec.h (linespec_complete, linespec_complete_function)
(linespec_complete_label): New symbol_name_match_type parameter.
* location.c (event_location::linespec_location): Now a struct
linespec_location.
(EL_LINESPEC): Adjust.
(initialize_explicit_location): Default to
symbol_name_match_type::WILD.
(new_linespec_location): New symbol_name_match_type parameter.
Record it in the location.
(get_linespec_location): Now returns a struct linespec_location.
(new_explicit_location): Also copy func_name_match_type.
(explicit_to_string_internal)
(string_to_explicit_location): Handle "-qualified".
(copy_event_location): Adjust to LINESPEC_LOCATION type change.
Copy symbol_name_match_type fields.
(event_location_deleter::operator()): Adjust to LINESPEC_LOCATION
type change.
(event_location_to_string): Adjust to LINESPEC_LOCATION type
change. Handle "-qualfied".
(string_to_explicit_location): Handle "-qualified".
(string_to_event_location_basic): New symbol_name_match_type
parameter. Pass it down.
(string_to_event_location): Handle "-qualified".
* location.h (struct linespec_location): New.
(explicit_location::func_name_match_type): New field.
(new_linespec_location): Now returns a const linespec_location *.
(string_to_event_location_basic): New symbol_name_match_type
parameter.
(explicit_completion_info::saw_explicit_location_option): New
field.
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Adjust to pass a
symbol_name_match_type to new_linespec_location.
* python/py-breakpoint.c (bppy_init): Likewise.
* python/python.c (gdbpy_decode_line): Likewise.
gdb/testsuite/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* gdb.base/langs.exp: Use -qualified.
* gdb.cp/meth-typedefs.exp: Use -qualified, and add tests without
it.
* gdb.cp/namespace.exp: Use -qualified.
* gdb.linespec/cpcompletion.exp (overload-2, fqn, fqn-2)
(overload-3, template-overload, template-ret-type, const-overload)
(const-overload-quoted, anon-ns, ambiguous-prefix): New
procedures.
(test_driver): Call them.
* gdb.cp/save-bp-qualified.cc: New.
* gdb.cp/save-bp-qualified.exp: New.
* gdb.linespec/explicit.exp: Test -qualified.
* lib/completion-support.exp (completion::explicit_opts_list): Add
"-qualified".
* lib/gdb.exp (gdb_breakpoint): Handle "qualified".
gdb/doc/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Linespec Locations): Document how "function" is
interpreted in C++ and Ada. Document "-qualified".
(Explicit Locations): Document how "-function" is interpreted in
C++ and Ada. Document "-qualified".
While playing with valgrind, I noticed that with Python 3, the progname
variable in do_start_initialization is not being freed (concat returns a
malloc'ed string). This patch uses unique_xmalloc_ptr to manage it.
With Python 2, we pass progname it directly to Py_SetProgramName, so it
should not be freed. We therefore release it before passing it.
gdb/ChangeLog:
* python/python.c (do_start_initialization): Change progname
type to gdb::unique_xmalloc_ptr. Release the pointer when using
Python 2.
Recent gcc 8 trunk emits the warning below,
../../binutils-gdb/gdb/python/py-gdb-readline.c:79:15: error: ‘char* strncpy(char*, const char*, size_t)’ output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
strncpy (q, p, n);
~~~~~~~~^~~~~~~~~
../../binutils-gdb/gdb/python/py-gdb-readline.c:73:14: note: length computed here
n = strlen (p);
~~~~~~~^~~
gdb:
2017-11-22 Yao Qi <yao.qi@linaro.org>
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Use strcpy.
If you happen to press Ctrl-C while GDB is running the Python unwinder
machinery, the Ctrl-C is swallowed by the Python unwinder machinery.
For example, with:
break foo
commands
> c
> end
and
while (1)
foo ();
and then let the inferior hit "foo" repeatedly, sometimes Ctrl-C
results in:
~~~
23 usleep (100);
Breakpoint 2, foo () at gdb.base/bp-cmds-continue-ctrl-c.c:23
23 usleep (100);
^C
Breakpoint 2, Python Exception <class 'KeyboardInterrupt'> <class 'KeyboardInterrupt'>:
foo () at gdb.base/bp-cmds-continue-ctrl-c.c:23
23 usleep (100);
Breakpoint 2, foo () at gdb.base/bp-cmds-continue-ctrl-c.c:23
23 usleep (100);
Breakpoint 2, foo () at gdb.base/bp-cmds-continue-ctrl-c.c:23
23 usleep (100);
~~~
Notice the Python exception above. The interesting thing here is that
GDB continues as if nothing happened, doesn't really stop and give
back control to the user. Instead, the Ctrl-C aborted the Python
unwinder sniffer and GDB moved on to just use another unwinder.
Fix this by translating a PyExc_KeyboardInterrupt back into a Quit
exception once back in GDB.
This was exposed by the new gdb.base/bp-cmds-continue-ctrl-c.exp
testcase added later in the series.
gdb/ChangeLog:
2017-11-16 Pedro Alves <palves@redhat.com>
* python/py-unwind.c (pyuw_sniffer): Translate
PyExc_KeyboardInterrupt to a GDB Quit exception.
The last remaing use for DOUBLEST is in the code that interfaces to the
scripting languages (Python and Guile). The problem here is that we
expose interfaces to convert a GDB value to and from native values of
floating-point type in those languages, and those by definition use
the host floating-point format.
While we cannot completely eliminate conversions to/from the host
floating-point format here, we still need to get rid of the uses
of value_as_double / value_from_double, since those will go away.
This patch implements two new target-float.c routine:
- target_float_to_host_double
- target_float_from_host_double
which convert to/from a host "double". Those should only ever be
used where a host "double" is mandated by an external interface.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* target-float.c (floatformat_to_host_double): New function.
(floatformat_from_host_double): Likewise.
(target_float_to_host_double): Likewise.
(target_float_from_host_double): Likewise.
* target-float.h (target_float_to_host_double): Add prototype.
(target_float_from_host_double): Likewise.
* guile/scm-value.c: Include "target-float.h".
(gdbscm_value_to_real): Use target_float_to_host_double.
Handle integer source values via value_as_long.
* guile/scm-math.c: Include "target-float.h". Do not include
"doublest.h", "dfp.h", and "expression.h".
(vlscm_convert_typed_number): Use target_float_from_host_double.
(vlscm_convert_number): Likewise.
* python/py-value.c (valpy_float): Use target_float_to_host_double.
(convert_value_from_python): Use target_float_from_host_double.
This patch introduces the new set of target floating-point handling routines
in target-float.{c,h}. In the end, the intention is that this file will
contain support for all operations in target FP format, fully replacing
both the current doublest.{c,h} and dfp.{c,h}.
To begin with, this patch only adds a target_float_is_zero routine,
which handles the equivalent of decimal_is_zero for both binary and
decimal FP. For the binary case, to avoid conversion to DOUBLEST,
this is implemented using the floatformat_classify routine.
However, it turns out that floatformat_classify actually has a bug
(it was not used to check for zero before), so this is fixed as well.
The new routine is used in both value_logical_not and valpy_nonzero.
There is one extra twist: the code previously used value_as_double
to convert to DOUBLEST and then compare against zero. That routine
performs an extra task: it detects invalid floating-point values
and raises an error. In any place where value_as_double is removed
in favor of some target-float.c routine, we need to replace that check.
To keep this check centralized in one place, I've added a new routine
is_floating_value, which returns a boolean determining whether a
value's type is floating point (binary or decimal), and if so, also
performs the validity check. Since we need to check whether a value
is FP before calling any of the target-float routines anyway, this
seems a good place to add the check without much code size overhead.
In some places where we only want to check for floating-point types
and not perform a validity check (e.g. for the *output* of an operation),
we can use the new is_floating_type routine (in gdbarch) instead.
The validity check itself is done by a new target_float_is_valid
routine in target-float, encapsulating floatformat_is_valid.
ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.c (SFILES): Add target-float.c.
(HFILES_NO_SRCDIR): Add target-float.h.
(COMMON_OBS): Add target-float.o.
* target-float.h: New file.
* target-float.c: New file.
* doublest.c (floatformat_classify): Fix detection of float_zero.
* gdbtypes.c (is_floating_type): New function.
* gdbtypes.h (is_floating_type): Add prototype.
* value.c: Do not include "floatformat.h".
(unpack_double): Use target_float_is_valid.
(is_floating_value): New function.
* value.h (is_floating_value): Add prototype-
* valarith.c: Include "target-float.h".
(value_logical_not): Use target_float_is_zero.
* python/py-value.c: Include "target-float.h".
(valpy_nonzero): Use target_float_is_zero.
thpy_get_inferior function should return a new reference to the
existing inferior object, and therefore should increment its refcount.
Fixed bug looks like this.
If multiple time call gdb.selected_thread ().inferior, gdb throws exception:
(gdb) pi gdb.selected_thread().inferior
<gdb.Inferior object at 0x7f1952bea698>
(gdb) pi gdb.selected_thread().inferior
Python Exception <type 'exceptions.AttributeError'> 'NoneType' object
has no attribute 'inferior':
Error while executing Python code.
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7f54f0474740 (LWP 584) "mc" 0x00007f54ef055c33 in
This adds two add_cmd overloads: one whose callback takes a const char *,
and one that doesn't accept a function at all. The no-function overload
was introduced to avoid ambiguity when NULL was passed as the function.
Long term the goal is for all commands to take const arguments, and
for the non-const variants to be removed entirely.
gdb/ChangeLog
2017-09-27 Tom Tromey <tom@tromey.com>
* cli/cli-decode.c (add_cmd, set_cmd_cfunc): New function
overloads.
(do_add_cmd): Rename from add_cmd. Don't call set_cmd_cfunc.
(do_const_cfunc): New function.
(cmd_cfunc_eq): New overload.
(cli_user_command_p): Check do_const_cfunc.
* cli/cli-decode.h (struct cmd_list_element) <function>: New field
const_cfunc.
* command.h (add_cmd): Add const overload and no-function
overload.
(set_cmd_cfunc): Add const overload.
(cmd_const_cfunc_ftype): Declare.
(cmd_cfunc_eq): Add const overload.
* breakpoint.c, cli-cmds.c, cli-dump.c, guile/scm-cmd.c,
python/py-cmd.c, target.c, tracepoint.c: Use no-function add_cmd
overload.
This changes find_frame_funname to return a unique_xmalloc_ptr and
then fixes up the callers. This removes several cleanups.
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* ada-lang.c (is_known_support_routine): Update.
(ada_unhandled_exception_name_addr_from_raise): Update.
* guile/scm-frame.c (gdbscm_frame_name): Update.
* python/py-frame.c (frapy_name): Update.
(frapy_function): Update.
* stack.h (find_frame_funname): Update.
* stack.c (find_frame_funname): Return unique_xmalloc_ptr.
(print_frame): Update.
This renames a few functions -- skip_spaces_const,
skip_to_space_const, get_number_const, extract_arg_const -- to drop
the "_const" suffix and instead rely on overloading.
This makes future const fixes simpler by reducing the number of lines
that must be changed. I think it is also not any less clear, as all
these functions have the same interface as their non-const versions by
design. Furthermore there's an example of using an overload in-tree
already, namely check_for_argument.
This patch was largely created using some perl one-liners; then a few
fixes were applied by hand.
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* common/common-utils.h (skip_to_space): Remove macro, redeclare
as function.
(skip_to_space): Rename from skip_to_space_const.
* common/common-utils.c (skip_to_space): New function.
(skip_to_space): Rename from skip_to_space_const.
* cli/cli-utils.h (get_number): Rename from get_number_const.
(extract_arg): Rename from extract_arg_const.
* cli/cli-utils.c (get_number): Rename from get_number_const.
(extract_arg): Rename from extract_arg_const.
(number_or_range_parser::get_number): Use ::get_number.
* aarch64-linux-tdep.c, ada-lang.c, arm-linux-tdep.c, ax-gdb.c,
break-catch-throw.c, breakpoint.c, cli/cli-cmds.c, cli/cli-dump.c,
cli/cli-script.c, cli/cli-setshow.c, compile/compile.c,
completer.c, demangle.c, disasm.c, findcmd.c, linespec.c,
linux-tdep.c, linux-thread-db.c, location.c, mi/mi-parse.c,
minsyms.c, nat/linux-procfs.c, printcmd.c, probe.c,
python/py-breakpoint.c, record.c, rust-exp.y, serial.c, stack.c,
stap-probe.c, tid-parse.c, tracepoint.c: Update all callers.
The first patch in this series went through several iterations as I'd
forgotten how many places had to be touched to add a new event and a
new event type.
This patch simplifies the process using two new ".def" files. Now, a
new event type can be added by adding a line to "py-event-types.def",
and a new event registry can be added by adding a line to
"py-all-events.def".
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* python/python.c (do_start_initialization): Use
py-event-types.def to initialize types.
Define all object type structures.
* python/python-internal.h: Don't declare event initialization
functions.
* python/py-threadevent.c (thread_event_object_type): Don't
define.
* python/py-stopevent.c (stop_event_object_type): Don't define.
* python/py-signalevent.c (signal_event_object_type): Don't
declare or define.
* python/py-newobjfileevent.c (new_objfile_event_object_type)
(clear_objfiles_event_object_type): Don't declare or define.
* python/py-infevents.c (inferior_call_pre_event_object_type)
(inferior_call_post_event_object_type)
(register_changed_event_object_type)
(memory_changed_event_object_type): Don't declare or define.
* python/py-inferior.c (new_thread_event_object_type)
(new_inferior_event_object_type)
(inferior_deleted_event_object_type): Don't declare or define.
* python/py-exitedevent.c (exited_event_object_type): Don't
declare or define.
* python/py-evts.c (gdbpy_initialize_py_events): Use
py-all-events.def.
* python/py-events.h (thread_event_object_type): Don't declare.
(events_object): Use py-all-events.def.
* python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove. Use
py-event-types.def.
* python/py-event-types.def: New file.
* python/py-continueevent.c (create_continue_event_object): Don't
declare or define.
* python/py-bpevent.c (breakpoint_event_object_type): Don't
declare or define.
* python/py-all-events.def: New file.
It seems cleaner to me for functions like create_thread_event_object,
which pass object ownership to their callers, to directly return a
gdb_ref<>. This way the ownership transfer is part of the API. This
patch makes this change.
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* python/py-threadevent.c (create_thread_event_object): Return
gdbpy_ref.
* python/py-stopevent.h (create_stop_event_object)
(create_breakpoint_event_object, create_signal_event_object):
Update.
* python/py-stopevent.c (create_stop_event_object): Return
gdbpy_ref.
(emit_stop_event): Update.
* python/py-signalevent.c (create_signal_event_object): Return
gdbpy_ref.
* python/py-infevents.c (create_inferior_call_event_object):
Update.
* python/py-event.h (create_event_object)
(create_thread_event_object): Update.
* python/py-event.c (create_event_object): Return gdbpy_ref.
* python/py-continueevent.c: Return gdbpy_ref.
* python/py-bpevent.c (create_breakpoint_event_object): Return
gdbpy_ref.
This adds a few new events to gdb's Python layer: new_inferior,
inferior_deleted, and new_thread. I wanted to be able to add a
combined inferior/thread display window to my GUI, and I needed a few
events to make this work. This is PR python/15622.
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
PR python/15622:
* NEWS: Add entry.
* python/python.c (do_start_initialization): Initialize new event
types.
* python/python-internal.h (gdbpy_initialize_new_inferior_event)
(gdbpy_initialize_inferior_deleted_event)
(gdbpy_initialize_new_thread_event): Declare.
* python/py-threadevent.c (create_thread_event_object): Add option
"thread" parameter.
* python/py-inferior.c (new_thread_event_object_type)
(new_inferior_event_object_type)
(inferior_deleted_event_object_type): Declare.
(python_new_inferior, python_inferior_deleted): New functions.
(add_thread_object): Emit new_thread event.
(gdbpy_initialize_inferior): Attach new functions to corresponding
observers.
(new_thread, new_inferior, inferior_deleted): Define new event
types.
* python/py-evts.c (gdbpy_initialize_py_events): Add new
registries.
* python/py-events.h (events_object) <new_inferior,
inferior_deleted, new_thread>: New fields.
* python/py-event.h (create_thread_event_breakpoint): Add optional
"thread" parameter.
doc/ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* python.texi (Events In Python): Document new events.
testsuite/ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* gdb.python/py-infthread.exp: Add tests for new_thread event.
* gdb.python/py-inferior.exp: Add tests for new inferior events.
The fact that GDB defaults to assuming that functions return int, when
it has no debug info for the function has been a recurring source of
user confusion. Recently this came up on the errno pretty printer
discussions. Shortly after, it came up again on IRC, with someone
wondering why does getenv() in GDB return a negative int:
(gdb) p getenv("PATH")
$1 = -6185
This question (with s/getenv/random-other-C-runtime-function) is a FAQ
on IRC.
The reason for the above is:
(gdb) p getenv
$2 = {<text variable, no debug info>} 0x7ffff7751d80 <getenv>
(gdb) ptype getenv
type = int ()
... which means that GDB truncated the 64-bit pointer that is actually
returned from getent to 32-bit, and then sign-extended it:
(gdb) p /x -6185
$6 = 0xffffe7d7
The workaround is to cast the function to the right type, like:
(gdb) p ((char *(*) (const char *)) getenv) ("PATH")
$3 = 0x7fffffffe7d7 "/usr/local/bin:/"...
IMO, we should do better than this.
I see the "assume-int" issue the same way I see printing bogus values
for optimized-out variables instead of "<optimized out>" -- I'd much
rather that the debugger tells me "I don't know" and tells me how to
fix it than showing me bogus misleading results, making me go around
tilting at windmills.
If GDB prints a signed integer when you're expecting a pointer or
aggregate, you at least have some sense that something is off, but
consider the case of the function actually returning a 64-bit integer.
For example, compile this without debug info:
unsigned long long
function ()
{
return 0x7fffffffffffffff;
}
Currently, with pristine GDB, you get:
(gdb) p function ()
$1 = -1 # incorrect
(gdb) p /x function ()
$2 = 0xffffffff # incorrect
maybe after spending a few hours debugging you suspect something is
wrong with that -1, and do:
(gdb) ptype function
type = int ()
and maybe, just maybe, you realize that the function actually returns
unsigned long long. And you try to fix it with:
(gdb) p /x (unsigned long long) function ()
$3 = 0xffffffffffffffff # incorrect
... which still produces the wrong result, because GDB simply applied
int to unsigned long long conversion. Meaning, it sign-extended the
integer that it extracted from the return of the function, to 64-bits.
and then maybe, after asking around on IRC, you realize you have to
cast the function to a pointer of the right type, and call that. It
won't be easy, but after a few missteps, you'll get to it:
..... (gdb) p /x ((unsigned long long(*) ()) function) ()
$666 = 0x7fffffffffffffff # finally! :-)
So to improve on the user experience, this patch does the following
(interrelated) things:
- makes no-debug-info functions no longer default to "int" as return
type. Instead, they're left with NULL/"<unknown return type>"
return type.
(gdb) ptype getenv
type = <unknown return type> ()
- makes calling a function with unknown return type an error.
(gdb) p getenv ("PATH")
'getenv' has unknown return type; cast the call to its declared return type
- and then to make it easier to call the function, makes it possible
to _only_ cast the return of the function to the right type,
instead of having to cast the function to a function pointer:
(gdb) p (char *) getenv ("PATH") # now Just Works
$3 = 0x7fffffffe7d7 "/usr/local/bin:/"...
(gdb) p ((char *(*) (const char *)) getenv) ("PATH") # continues working
$4 = 0x7fffffffe7d7 "/usr/local/bin:/"...
I.e., it makes GDB default the function's return type to the type
of the cast, and the function's parameters to the type of the
arguments passed down.
After this patch, here's what you'll get for the "unsigned long long"
example above:
(gdb) p function ()
'function' has unknown return type; cast the call to its declared return type
(gdb) p /x (unsigned long long) function ()
$4 = 0x7fffffffffffffff # correct!
Note that while with "print" GDB shows the name of the function that
has the problem:
(gdb) p getenv ("PATH")
'getenv' has unknown return type; cast the call to its declared return type
which can by handy in more complicated expressions, "ptype" does not:
(gdb) ptype getenv ("PATH")
function has unknown return type; cast the call to its declared return type
This will be fixed in the next patch.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_evaluate_subexp) <TYPE_CODE_FUNC>: Don't handle
TYPE_GNU_IFUNC specially here. Throw error if return type is
unknown.
* ada-typeprint.c (print_func_type): Handle functions with unknown
return type.
* c-typeprint.c (c_type_print_base): Handle functions and methods
with unknown return type.
* compile/compile-c-symbols.c (convert_symbol_bmsym)
<mst_text_gnu_ifunc>: Use nodebug_text_gnu_ifunc_symbol.
* compile/compile-c-types.c: Include "objfiles.h".
(convert_func): For functions with unknown return type, warn and
default to int.
* compile/compile-object-run.c (compile_object_run): Adjust call
to call_function_by_hand_dummy.
* elfread.c (elf_gnu_ifunc_resolve_addr): Adjust call to
call_function_by_hand.
* eval.c (evaluate_subexp_standard): Adjust calls to
call_function_by_hand. Handle functions and methods with unknown
return type. Pass expect_type to call_function_by_hand.
* f-typeprint.c (f_type_print_base): Handle functions with unknown
return type.
* gcore.c (call_target_sbrk): Adjust call to
call_function_by_hand.
* gdbtypes.c (objfile_type): Leave nodebug text symbol with NULL
return type instead of int. Make nodebug_text_gnu_ifunc_symbol be
an integer address type instead of nodebug.
* guile/scm-value.c (gdbscm_value_call): Adjust call to
call_function_by_hand.
* infcall.c (error_call_unknown_return_type): New function.
(call_function_by_hand): New "default_return_type" parameter.
Pass it down.
(call_function_by_hand_dummy): New "default_return_type"
parameter. Use it instead of defaulting to int. If there's no
default and the return type is unknown, throw an error. If
there's a default return type, and the called function has no
debug info, then assume the function is prototyped.
* infcall.h (call_function_by_hand, call_function_by_hand_dummy):
New "default_return_type" parameter.
(error_call_unknown_return_type): New declaration.
* linux-fork.c (call_lseek): Cast return type of lseek.
(inferior_call_waitpid, checkpoint_command): Adjust calls to
call_function_by_hand.
* linux-tdep.c (linux_infcall_mmap, linux_infcall_munmap): Adjust
calls to call_function_by_hand.
* m2-typeprint.c (m2_procedure): Handle functions with unknown
return type.
* objc-lang.c (lookup_objc_class, lookup_child_selector)
(value_nsstring, print_object_command): Adjust calls to
call_function_by_hand.
* p-typeprint.c (pascal_type_print_varspec_prefix): Handle
functions with unknown return type.
(pascal_type_print_func_varspec_suffix): New function.
(pascal_type_print_varspec_suffix) <TYPE_CODE_FUNC,
TYPE_CODE_METHOD>: Use it.
* python/py-value.c (valpy_call): Adjust call to
call_function_by_hand.
* rust-lang.c (rust_evaluate_funcall): Adjust call to
call_function_by_hand.
* valarith.c (value_x_binop, value_x_unop): Adjust calls to
call_function_by_hand.
* valops.c (value_allocate_space_in_inferior): Adjust call to
call_function_by_hand.
* typeprint.c (type_print_unknown_return_type): New function.
* typeprint.h (type_print_unknown_return_type): New declaration.
gdb/testsuite/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* gdb.base/break-main-file-remove-fail.exp (test_remove_bp): Cast
return type of munmap in infcall.
* gdb.base/break-probes.exp: Cast return type of foo in infcall.
* gdb.base/checkpoint.exp: Simplify using for loop. Cast return
type of ftell in infcall.
* gdb.base/dprintf-detach.exp (dprintf_detach_test): Cast return
type of getpid in infcall.
* gdb.base/infcall-exec.exp: Cast return type of execlp in
infcall.
* gdb.base/info-os.exp: Cast return type of getpid in infcall.
Bail on failure to extract the pid.
* gdb.base/nodebug.c: #include <stdint.h>.
(multf, multf_noproto, mult, mult_noproto, add8, add8_noproto):
New functions.
* gdb.base/nodebug.exp (test_call_promotion): New procedure.
Change expected output of print/whatis/ptype with functions with
no debug info. Test all supported languages. Call
test_call_promotion.
* gdb.compile/compile.exp: Adjust expected output to expect
warning.
* gdb.threads/siginfo-threads.exp: Likewise.
Instead, make symtab_and_line initialize its members itself. Many
symtab_and_line declarations are moved to where the object is
initialized at the same time both for clarity and to avoid double
initialization. A few functions, like e.g., find_frame_sal are
adjusted to return the sal using normal function return instead of an
output parameter likewise to avoid having to default-construct a sal
and then immediately have the object overwritten.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ada-lang.c (is_known_support_routine): Move sal declaration to
where it is initialized.
* breakpoint.c (create_internal_breakpoint, init_catchpoint)
(parse_breakpoint_sals, decode_static_tracepoint_spec)
(clear_command, update_static_tracepoint): Remove init_sal
references. Move declarations closer to initializations.
* cli/cli-cmds.c (list_command): Move sal declarations closer to
initializations.
* elfread.c (elf_gnu_ifunc_resolver_stop): Remove init_sal
references. Move sal declarations closer to initializations.
* frame.c (find_frame_sal): Return a symtab_and_line via function
return instead of output parameter. Remove init_sal references.
* frame.h (find_frame_sal): Return a symtab_and_line via function
return instead of output parameter.
* guile/scm-frame.c (gdbscm_frame_sal): Adjust.
* guile/scm-symtab.c (stscm_make_sal_smob): Use in-place new
instead of memset.
(gdbscm_find_pc_line): Remove init_sal reference.
* infcall.c (call_function_by_hand_dummy): Remove init_sal
references. Move declarations closer to initializations.
* infcmd.c (set_step_frame): Update. Move declarations closer to
initializations.
(finish_backward): Remove init_sal references. Move declarations
closer to initializations.
* infrun.c (process_event_stop_test, handle_step_into_function)
(insert_hp_step_resume_breakpoint_at_frame)
(insert_step_resume_breakpoint_at_caller): Likewise.
* linespec.c (create_sals_line_offset, decode_digits_ordinary)
(symbol_to_sal): Likewise.
* probe.c (parse_probes_in_pspace): Remove init_sal reference.
* python/py-frame.c (frapy_find_sal): Move sal declaration closer
to its initialization.
* reverse.c (save_bookmark_command): Use new/delete. Remove
init_sal references. Move declarations closer to initializations.
* source.c (get_current_source_symtab_and_line): Remove brace
initialization.
(set_current_source_symtab_and_line): Now takes the sal by const
reference. Remove brace initialization.
(line_info): Remove init_sal reference.
* source.h (set_current_source_symtab_and_line): Now takes a
symtab_and_line via const reference.
* stack.c (set_current_sal_from_frame): Adjust.
(print_frame_info): Adjust.
(get_last_displayed_sal): Return the sal via function return
instead of via output parameter. Simplify.
(frame_info): Adjust.
* stack.h (get_last_displayed_sal): Return the sal via function
return instead of via output parameter.
* symtab.c (init_sal): Delete.
(find_pc_sect_line): Remove init_sal references. Move
declarations closer to initializations.
(find_function_start_sal): Remove init_sal references. Move
declarations closer to initializations.
* symtab.h (struct symtab_and_line): In-class initialize all
fields.
* tracepoint.c (set_traceframe_context)
(print_one_static_tracepoint_marker): Remove init_sal references.
Move declarations closer to initializations.
* tui/tui-disasm.c (tui_show_disassem_and_update_source): Adjust.
* tui/tui-stack.c (tui_show_frame_info): Adjust. Move
declarations closer to initializations.
* tui/tui-winsource.c (tui_update_source_window_as_is): Remove
init_sal references. Adjust.
This replaces "struct symtabs_and_lines" with
std::vector<symtab_and_line> in most cases. This removes a number of
cleanups.
In some cases, the sals objects do not own the sals they point at.
Instead they point at some sal that lives on the stack. Typically
something like this:
struct symtab_and_line sal;
struct symtabs_and_lines sals;
// fill in sal
sals.nelts = 1;
sals.sals = &sal;
// use sals
Instead of switching those cases to std::vector too, such usages are
replaced by gdb::array_view<symtab_and_line> instead. This avoids
introducing heap allocations.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Use range-for.
* break-catch-throw.c (re_set_exception_catchpoint): Update.
* breakpoint.c: Include "common/array-view.h".
(init_breakpoint_sal, create_breakpoint_sal): Change sals
parameter from struct symtabs_and_lines to
array_view<symtab_and_line>. Adjust. Use range-for. Update.
(breakpoint_sals_to_pc): Change sals parameter from struct
symtabs_and_lines to std::vector reference.
(check_fast_tracepoint_sals): Change sals parameter from struct
symtabs_and_lines to std::array_view. Use range-for.
(decode_static_tracepoint_spec): Return a std::vector instead of
symtabs_and_lines. Update.
(create_breakpoint): Update.
(break_range_command, until_break_command, clear_command): Update.
(base_breakpoint_decode_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location)
(bkpt_probe_decode_location, tracepoint_decode_location)
(tracepoint_probe_decode_location)
(strace_marker_create_sals_from_location): Return a std::vector
instead of symtabs_and_lines.
(strace_marker_create_breakpoints_sal): Update.
(strace_marker_decode_location): Return a std::vector instead of
symtabs_and_lines. Update.
(update_breakpoint_locations): Change struct symtabs_and_lines
parameters to gdb::array_view. Adjust.
(location_to_sals): Return a std::vector instead of
symtabs_and_lines. Update.
(breakpoint_re_set_default): Use std::vector instead of struct
symtabs_and_lines.
(decode_location_default): Return a std::vector instead of
symtabs_and_lines. Update.
* breakpoint.h: Include "common/array-view.h".
(struct breakpoint_ops) <decode_location>: Now returns a
std::vector instead of returning a symtabs_and_lines via output
parameter.
(update_breakpoint_locations): Change sals parameters to use
gdb::array_view.
* cli/cli-cmds.c (edit_command, list_command): Update to use
std::vector and gdb::array_view.
(ambiguous_line_spec): Adjust to use gdb::array_view and
range-for.
(compare_symtabs): Rename to ...
(cmp_symtabs): ... this. Change parameters to symtab_and_line
const reference and adjust.
(filter_sals): Rewrite using std::vector and standard algorithms.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Simplify.
(jump_command): Update to use std::vector.
* linespec.c (struct linespec_state) <canonical_names>: Update
comment.
(add_sal_to_sals_basic): Delete.
(add_sal_to_sals, filter_results, convert_results_to_lsals)
(decode_line_2, create_sals_line_offset)
(convert_address_location_to_sals, convert_linespec_to_sals)
(convert_explicit_location_to_sals, parse_linespec)
(event_location_to_sals, decode_line_full, decode_line_1)
(decode_line_with_current_source)
(decode_line_with_last_displayed, decode_objc)
(decode_digits_list_mode, decode_digits_ordinary, minsym_found)
(linespec_result::~linespec_result): Adjust to use std::vector
instead of symtabs_and_lines.
* linespec.h (linespec_sals::sals): Now a std::vector.
(struct linespec_result): Use std::vector, bool, and in-class
initialization.
(decode_line_1, decode_line_with_current_source)
(decode_line_with_last_displayed): Return std::vector.
* macrocmd.c (info_macros_command): Use std::vector.
* mi/mi-main.c (mi_cmd_trace_find): Use std::vector.
* probe.c (parse_probes_in_pspace, parse_probes): Adjust to use
std::vector.
* probe.h (parse_probes): Return a std::vector.
* python/python.c (gdbpy_decode_line): Use std::vector and
gdb::array_view.
* source.c (select_source_symtab, line_info): Use std::vector.
* stack.c (func_command): Use std::vector.
* symtab.h (struct symtabs_and_lines): Delete.
* tracepoint.c (tfind_line_command, scope_info): Use std::vector.
Because it contains a non-POD type field (flags), the type btrace_insn
should be new'ed/delete'd. Replace the VEC (btrace_insn_s) in
btrace_function with an std::vector.
gdb/ChangeLog:
* btrace.h (btrace_insn_s, DEF_VEC_O (btrace_insn_s)): Remove.
(btrace_function) <insn>: Change type to use std::vector.
* btrace.c (ftrace_debug, ftrace_call_num_insn,
ftrace_find_call, ftrace_new_gap, ftrace_update_function,
ftrace_update_insns, ftrace_compute_global_level_offset,
btrace_stitch_bts, btrace_clear, btrace_insn_get,
btrace_insn_end, btrace_insn_next, btrace_insn_prev): Adjust to
change to std::vector.
(ftrace_update_insns): Adjust to change to std::vector, change
type of INSN parameter.
(btrace_compute_ftrace_bts): Adjust call to ftrace_update_insns.
* record-btrace.c (btrace_call_history_insn_range,
btrace_compute_src_line_range,
record_btrace_frame_prev_register): Adjust to change to
std::vector.
* python/py-record-btrace.c (recpy_bt_func_instructions): Adjust
to change to std::vector.
To help avoid issues like the one fixed by e88e8651cf34 ("Fix memory
leak in cp-support.c").
gdb/ChangeLog:
2017-08-09 Pedro Alves <palves@redhat.com>
* cp-name-parser.y (cp_comp_to_string): Return a
gdb::unique_xmalloc_ptr<char>.
* cp-support.c (replace_typedefs_qualified_name)
(replace_typedefs): Adjust to use gdb::unique_xmalloc_ptr<char>.
(cp_canonicalize_string_full): Use op= instead of explicit
convertion.
(cp_class_name_from_physname, method_name_from_physname)
(cp_func_name, cp_remove_params): Adjust to use
gdb::unique_xmalloc_ptr<char>.
* cp-support.h (cp_comp_to_string): Return a
gdb::unique_xmalloc_ptr<char>.
* python/py-type.c (typy_lookup_type): Adjust to use
gdb::unique_xmalloc_ptr<char>.
This changes one spot in the Python code to use gdb_argv. This
removes the last cleanup from the Python layer.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* python/py-param.c (compute_enum_values): Use gdb_argv.
This introduces gdb_argv, a class wrapping an "argv" pointer; that is,
a pointer to a NULL-terminated array of char*, where both the array
and each non-NULL element in the array are xmalloc'd.
This patch then changes most users of gdb_buildargv to use gdb_argv
instead.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* utils.h (struct gdb_argv_deleter): New.
(gdb_argv): New class.
* utils.c (gdb_argv::reset): New method.
* tracepoint.c (delete_trace_variable_command): Use gdb_argv.
* tracefile.c (tsave_command): Use gdb_argv.
* top.c (new_ui_command): Use gdb_argv.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols, maintenance_expand_symtabs): Use gdb_argv.
* symfile.c (symbol_file_command, generic_load)
(remove_symbol_file_command): Use gdb_argv.
* stack.c (backtrace_command): Use gdb_argv.
* source.c (add_path, show_substitute_path_command)
(unset_substitute_path_command, set_substitute_path_command):
Use gdb_argv.
* skip.c (skip_command): Use gdb_argv. Use gdb_buildargv.
* ser-mingw.c (pipe_windows_open): Use gdb_argv.
* remote.c (extended_remote_run, remote_put_command)
(remote_get_command, remote_delete_command): Use gdb_argv.
* remote-sim.c (gdbsim_load, gdbsim_create_inferior)
(gdbsim_open): Use gdb_argv.
* python/py-cmd.c (gdbpy_string_to_argv): Use gdb_argv.
* psymtab.c (maintenance_print_psymbols): Use gdb_argv.
* procfs.c (procfs_info_proc): Use gdb_argv.
* interps.c (interpreter_exec_cmd): Use gdb_argv.
* infrun.c (handle_command): Use gdb_argv.
* inferior.c (add_inferior_command, clone_inferior_command):
Use gdb_argv.
* guile/scm-string.c (gdbscm_string_to_argv): Use gdb_argv.
* exec.c (exec_file_command): Use gdb_argv.
* cli/cli-cmds.c (alias_command): Use gdb_argv.
* compile/compile.c (build_argc_argv): Use gdb_argv.
Tom Tromey
Alan Hayward
Eli Zaretskii
Simon Marchi
Joel Brobecker
Simon Marchi
Phil Muldoon
Pedro Alves
Yao Qi
Ulrich Weigand
Maksim Dzabraev
Kevin Buettner
John Baldwin