This patch adds a new class reg_buffer, and regcache inherits it. Class
reg_buffer is a very simple class, which has the buffer for register
contents and status only. It doesn't have any methods to set contents and
status, and it is expected that its children classes can inherit it and
add different access methods.
Another reason I keep class reg_buffer so simple is that I think
reg_buffer can be even reused in other classes which need to record the
registers contents and status, like frame cache for example.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache::regcache): Call reg_buffer ctor.
(regcache::arch): Move it to reg_buffer::arch.
(regcache::register_buffer): Likewise.
(regcache::assert_regnum): Likewise.
(regcache::num_raw_registers): Likewise.
* regcache.h (reg_buffer): New class.
(regcache): Inherit reg_buffer.
Since my following patches will change how each gdbarch read and write
pseudo registers, it's better to write a unit test to
regcache::cooked_write, to make sure my following changes don't cause
any regressions. See the comments on cooked_write_test.
gdb:
2018-01-22 Yao Qi <yao.qi@linaro.org>
* regcache.c (cooked_write_test): New function.
(_initialize_regcache): Register the test.
This patch removes the MT port. The removal was annoucned
https://sourceware.org/ml/gdb-announce/2017/msg00006.html
I'll remove MT from the top-level configure later.
gdb:
2018-01-22 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_TARGET_OBS): Remove mt-tdep.o.
* configure.tgt: Remove target mt.
* mt-tdep.c: Remove.
* regcache.c (cooked_read_test): Remove the check for mt.
footnote_register_size in regcache::dump is a constant zero, so the
condition check against footnote_register_size is dead code. The code
writing to footnote_register_size was removed by 01e1877.
This patche removes footnote_register_size and the dead code.
gdb:
2017-11-24 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache::dump): Remove footnote_register_size.
This patch adds a test to check cooked_read for readonly regcache. For
raw registers, cooked_read get either REG_VALID or REG_UNKNOWN, depends on
the raw register is in save_reggroup or not. For pseudo register,
cooked_read get different result in different ports.
gdb:
2017-11-24 Yao Qi <yao.qi@linaro.org>
* regcache.c (cooked_read_test): Add more test for readonly
regcache.
This patch adds a unit test to regcache::cooked_read. This unit test is a
little different from normal unit test, it is more about conformance test
or interaction test. This test pass both raw register number and pseudo
register number to regcache::cooked_read, in order to inspect 1) return
value of cooked_read, 2) how are target_ops to_xfer_partial,
to_{fetch,store}_registers called (because regcache is updated by means of
these three target_ops methods). With this test here, we have a clear
picture about how each port of GDB get cooked registers.
This patch also shares some code on mock target.
gdb:
2017-11-24 Yao Qi <yao.qi@linaro.org>
* gdbarch-selftests.c (test_target_has_registers): Move it to
target.c.
(test_target_has_stack): Likewise.
(test_target_has_memory): Likewise.
(test_target_prepare_to_store): Likewise.
(test_target_store_registers): Likewise.
(test_target_ops): Likewise.
* regcache.c: Include selftest-arch.h and gdbthread.h.
(target_ops_no_register): New class.
(test_target_fetch_registers): New.
(test_target_store_registers): New.
(test_target_xfer_partial): New.
(readwrite_regcache): New.
(cooked_read_test): New.
(_initialize_regcache): Register the test.
* target.c: (test_target_has_registers): Moved from
gdbarch-selftests.c.
(test_target_has_stack): Likewise.
(test_target_has_memory): Likewise.
(test_target_prepare_to_store): Likewise.
(test_target_store_registers): Likewise.
* target.h (test_target_ops): New class.
The address space is useless to readonly regcache, so this patch removes
the parameter to construct readonly regcache.
address_space was added in regcache by 6c95b8d, but for read-write
regcache. regcache::aspace is used for various breakpoint/watchpoint
checking, and these regcache are not read-only regcache.
gdb:
2017-11-02 Yao Qi <yao.qi@linaro.org>
* frame.c (do_frame_register_read): Remove aspace.
* jit.c (jit_frame_sniffer): Likwise.
* ppc-linux-tdep.c (ppu2spu_sniffer): Likewise.
* regcache.c (regcache::regcache): Pass nullptr.
(regcache_print): Caller updated.
* regcache.h (regcache::regcache): Remove one constructor
parameter aspace.
struct regcache_descr has fields nr_raw_registers and gdbarch, and
nr_raw_registers can be got via gdbarch_num_regs (gdbarch), so it looks
nr_raw_registers is redundant. This patch removes it and adds a protected
method num_raw_registers.
gdb:
2017-11-02 Yao Qi <yao.qi@linaro.org>
* regcache.c (struct regcache_descr) <nr_raw_registers>: Remove.
(init_regcache_descr): Use gdbarch_num_regs.
(regcache::regcache): Likewise.
(regcache::get_register_status): Likewise.
(regcache::assert_raw_regnum): Likewise.
(regcache::cooked_read): Likewise.
(regcache::cooked_read_value): Likewise.
(regcache::cooked_write): Likewise.
(regcache::dump): Likewise.
(regcache::num_raw_registers): New method.
* regcache.h (class regcache) <num_raw_registers>: New.
class regcache has some methods checking the range of register number,
this patch is to move it in a new method assert_regnum.
gdb:
2017-11-02 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache::assert_regnum): New method.
(regcache::invalidate): Call assert_regnum.
(regcache::raw_update): Likewise.
(regcache::raw_write): Likewise.
(regcache::raw_read_part): Likewise.
(regcache::raw_write_part): Likewise.
(regcache::raw_supply): Likewise.
(regcache::raw_supply_integer): Likewise.
(regcache::raw_supply_zeroed): Likewise.
(regcache::raw_collect): Likewise.
(regcache::raw_collect_integer): Likewise.
* regcache.h (regcache::assert_regnum): Declare.
These code wrapped by "#if 0" was added by af030b9a, which added the new
command to dump registers in 2002. The email didn't mention this either
https://sourceware.org/ml/gdb-patches/2002-08/msg00227.html It was there
for 15 years, and nobody needs it, so we can remove it.
gdb:
2017-11-02 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache::dump): Remove code.
struct regcache_descr has two fields sizeof_raw_register_status
and sizeof_cooked_register_status, but they equal to nr_cooked_registers
and nr_raw_registers respectively, so this patch removes them.
gdb:
2017-11-02 Yao Qi <yao.qi@linaro.org>
* regcache.c (struct regcache_descr) <sizeof_raw_register_status>:
Remove.
<sizeof_cooked_register_status>: Remove.
(init_regcache_descr): Update.
(regcache::regcache): Use nr_cooked_registers and nr_raw_registers.
(regcache::save): Likewise.
(regcache::dump): Likewise.
When building I got:
../../binutils-gdb/gdb/regcache.c:935:24: error: the address of ‘ssize_t read(int, void*, size_t)’ will never be NULL [-Werror=address]
This happens because "read" used to be a parameter to this function,
which was then removed; but the assertion wasn't updated.
I don't think the assertion is relevant any more, to this removes it.
I'm checking it in as obvious.
2017-10-17 Tom Tromey <tom@tromey.com>
* regcache.c (regcache::xfer_part): Remove assertion.
Since xfer_part is already a class method, and only
{raw,cooked}_{read,write} are passed to it. We can remove these two
arguments, but add a bool argument is_raw, indicating raw registers or
cooked registers are accessed.
gdb:
2017-10-17 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache::xfer_part): Remove parameters read and
write, add parameter is_raw. All callers are updated.
A following patch will change the default target_thread_architecture
method, like this:
struct gdbarch *
default_thread_architecture (struct target_ops *ops, ptid_t ptid)
{
- return target_gdbarch ();
+ inferior *inf = find_inferior_ptid (ptid);
+ gdb_assert (inf != NULL);
+ return inf->gdbarch;
}
This is because target_gdbarch is really just
current_inferior()->gdbarch, and it's wrong to return that
architecture when the inferior of the passed in PTID is NOT the
current inferior -- the inferior for PTID may be running a different
architecture. E.g., a mix of 64-bit and 32-bit inferiors in the same
debug session.
Doing that change above however exposes a problem in "maint print
registers", caught be the testsuite:
-PASS: gdb.base/maint.exp: maint print registers
+FAIL: gdb.base/maint.exp: maint print registers (GDB internal error)
...
gdb/inferior.c:309: internal-error: inferior* find_inferior_pid(int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
The call stack looks like this:
#0 0x000000000068b707 in internal_error(char const*, int, char const*, ...) (file=0xa9b958 "gdb/inferior.c", line=309, fmt=0xa9b8e0 "%s: Assertion `%s' failed.") at gdb/common/errors.c:54
#1 0x00000000006e1c40 in find_inferior_pid(int) (pid=0) at gdb/inferior.c:309
#2 0x00000000006e1c8d in find_inferior_ptid(ptid_t) (ptid=...) at gdb/inferior.c:323
#3 0x00000000007c18dc in default_thread_architecture(target_ops*, ptid_t) (ops=0xf86d60 <dummy_target>, ptid=...)
at gdb/target.c:3134
#4 0x00000000007b5414 in delegate_thread_architecture(target_ops*, ptid_t) (self=0xf86d60 <dummy_target>, arg1=...)
at gdb/target-delegates.c:2527
#5 0x00000000007647b3 in get_thread_regcache(ptid_t) (ptid=...) at gdb/regcache.c:466
#6 0x00000000007647ff in get_current_regcache() () at gdb/regcache.c:475
#7 0x0000000000767495 in regcache_print(char const*, regcache_dump_what) (args=0x0, what_to_dump=regcache_dump_none)
at gdb/regcache.c:1599
#8 0x0000000000767550 in maintenance_print_registers(char const*, int) (args=0x0, from_tty=1)
at gdb/regcache.c:1613
I.e., the test does "maint print registers" while the inferior is not
running yet. This is expected to work, and there's already a hack in
get_thread_arch_regcache to make it work.
Instead of pilling on hacks in the internal of regcache and
target_ops, this commit moves the null_ptid special casing to where it
belongs -- higher up in the call chain in the implementation of "maint
print registers" & co directly.
gdb/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* regcache.c (get_thread_arch_regcache): Remove null_ptid special
case.
(regcache_print): Handle !target_has_registers here instead.
This removes the last cleanup from regcache.c by changing one function
to use std::string.
gdb/ChangeLog
2017-09-25 Tom Tromey <tom@tromey.com>
* regcache.c (regcache::dump): Use string_printf.
This removes make_cleanup_regcache_invalidate in favor of a simple
RAII class that handles register invalidation.
gdb/ChangeLog
2017-09-25 Tom Tromey <tom@tromey.com>
* regcache.c (class regcache_invalidator): New.
(struct register_to_invalidate): Remove.
(make_cleanup_regcache_invalidate): Remove.
(regcache::raw_write): Use regcache_invalidator.
With the growing number of selftests, I think it would be useful to be
able to run only a subset of the tests. This patch associates a name to
each registered selftest. It then allows doing something like:
(gdb) maintenance selftest aarch64
Running self-tests.
Running selftest aarch64-analyze-prologue.
Running selftest aarch64-process-record.
Ran 2 unit tests, 0 failed
or with gdbserver:
./gdbserver --selftest=aarch64
In both cases, only the tests that contain "aarch64" in their name are
ran. To help validate that the tests you want to run were actually ran,
it also prints a message with the test name before running each test.
Right now, all the arch-dependent tests are registered as a single test
of the selftests. To be able to filter those too, I made them
"first-class citizen" selftests. The selftest type is an interface,
with different implementations for "simple selftests" and "arch
selftests". The run_tests function simply iterates on that an invokes
operator() on each test.
I changed the tests data structure from a vector to a map, because
- it allows iterating in a stable (alphabetical) order
- it allows to easily verify if a test with a given name has been
registered, to avoid duplicates
There's also a new command "maintenance info selftests" that lists the
registered selftests.
gdb/ChangeLog:
* common/selftest.h (selftest): New struct/interface.
(register_test): Add name parameter, add new overload.
(run_tests): Add filter parameter.
(for_each_selftest_ftype): New typedef.
(for_each_selftest): New declaration.
* common/selftest.c (tests): Change type to
map<string, unique_ptr<selftest>>.
(simple_selftest): New struct.
(register_test): New function.
(register_test): Add name parameter and use it.
(run_tests): Add filter parameter and use it. Add prints.
Adjust to vector -> map change.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add names when
registering selftests.
* arm-tdep.c (_initialize_arm_tdep): Likewise.
* disasm-selftests.c (_initialize_disasm_selftests): Likewise.
* dwarf2-frame.c (_initialize_dwarf2_frame): Likewise.
* dwarf2loc.c (_initialize_dwarf2loc): Likewise.
* findvar.c (_initialize_findvar): Likewise.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Likewise.
* maint.c (maintenance_selftest): Update call to run_tests.
(maintenance_info_selftests): New function.
(_initialize_maint_cmds): Register "maintenance info selftests"
command. Update "maintenance selftest" doc.
* regcache.c (_initialize_regcache): Add names when registering
selftests.
* rust-exp.y (_initialize_rust_exp): Likewise.
* selftest-arch.c (gdbarch_selftest): New struct.
(gdbarch_tests): Remove.
(register_test_foreach_arch): Add name parameter. Call
register_test.
(tests_with_arch): Remove, move most content to
gdbarch_selftest::operator().
(_initialize_selftests_foreach_arch): Remove.
* selftest-arch.h (register_test_foreach_arch): Add name
parameter.
(run_tests_with_arch): New declaration.
* utils-selftests.c (_initialize_utils_selftests): Add names
when registering selftests.
* utils.c (_initialize_utils): Likewise.
* unittests/array-view-selftests.c
(_initialize_array_view_selftests): Likewise.
* unittests/environ-selftests.c (_initialize_environ_selftests):
Likewise.
* unittests/function-view-selftests.c
(_initialize_function_view_selftests): Likewise.
* unittests/offset-type-selftests.c
(_initialize_offset_type_selftests): Likewise.
* unittests/optional-selftests.c
(_initialize_optional_selftests): Likewise.
* unittests/scoped_restore-selftests.c
(_initialize_scoped_restore_selftests): Likewise.
* NEWS: Document "maintenance selftest" and "maint info
selftests".
gdb/gdbserver/ChangeLog:
* server.c (captured_main): Accept argument for --selftest.
Update run_tests call.
* linux-x86-tdesc-selftest.c (initialize_low_tdesc): Add names
when registering selftests.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Document filter parameter
of "maint selftest". Document "maint info selftests" command.
Nowadays, regcache_cpy is used where src is read-only and dst is not
read-only, so the regcache_cpy can be simplified to handle this case only.
As a result, regcache::cpy_no_passthrough, which is about two read-only
regcache copy, is no longer used, remove it as well.
gdb:
2017-07-18 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache_cpy): Simplify it.
(regcache::cpy_no_passthrough): Remove it.
* regcache.h (cpy_no_passthrough): Remove it.
(regcache_dup, regcache_cpy): Update comments.
This patch converts functions extract_{unsigned,signed}_integer
to a function template extract_integer, which has two instantiations. It
also does the similar changes to store__{unsigned,signed}_integer,
regcache::raw_read_{unsigned,signed}, regcache::raw_write_{unsigned,signed},
regcache::cooked_read_{unsigned,signed},
regcache::cooked_write_{unsigned,signed}.
This patch was posted here
https://sourceware.org/ml/gdb-patches/2017-05/msg00492.html but the
problem was fixed in a different way. However, I think the patch is still
useful to shorten the code.
gdb:
2017-06-16 Alan Hayward <alan.hayward@arm.com>
Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* defs.h (RequireLongest): New.
(extract_integer): Declare function template.
(extract_signed_integer): Remove the declaration, but define it
static inline.
(extract_unsigned_integer): Likewise.
(store_integer): Declare function template.
(store_signed_integer): Remove the declaration, but define it
static inline.
(store_unsigned_integer): Likewise.
* findvar.c (extract_integer): New function template.
(extract_signed_integer): Remove.
(extract_unsigned_integer): Remove.
(extract_integer<LONGEST>, extract_integer<ULONGEST>): Explicit
instantiations.
(store_integer): New function template.
(store_signed_integer): Remove.
(store_unsigned_integer): Remove.
(store_integer): Explicit instantiations.
* regcache.c (regcache_raw_read_signed): Update.
(regcache::raw_read): New function.
(regcache::raw_read_signed): Remove.
(regcache::raw_read_unsigned): Remove.
(regcache_raw_read_unsigned): Update.
(regcache_raw_write_unsigned): Update.
(regcache::raw_write_signed): Remove.
(regcache::raw_write): New function.
(regcache_cooked_read_signed): Update.
(regcache::raw_write_unsigned): Remove.
(regcache::cooked_read_signed): Remove.
(regcache_cooked_read_unsigned): Update.
(regcache::cooked_read_unsigned): Remove.
(regcache_cooked_write_signed): Update.
(regcache_cooked_write_unsigned): Update.
* regcache.h (regcache) <raw_read_signed>: Remove.
<raw_write_signed, raw_read_unsigned, raw_write_unsigned>: Remove.
<raw_read, raw_write>: New.
<cooked_read_signed, cooked_write_signed>: Remove.
<cooked_write_unsigned, cooked_read_unsigned>: Remove.
<cooked_read, cooked_write>: New.
* sh64-tdep.c (sh64_pseudo_register_read): Update.
(sh64_pseudo_register_write): Update.
Use these to replace instances of MAX_REGISTER_SIZE.
* defs.h (copy_integer_to_size): New declaration.
* findvar.c (copy_integer_to_size): New function.
(do_cint_test): New selftest function.
(copy_integer_to_size_test): Likewise.
(_initialize_findvar): Likewise.
* mips-fbsd-tdep.c (mips_fbsd_supply_reg): Use raw_supply_integer.
(mips_fbsd_collect_reg): Use raw_collect_integer.
* mips-linux-tdep.c (supply_32bit_reg): Use raw_supply_integer.
(mips64_fill_gregset): Use raw_collect_integer
(mips64_fill_fpregset): Use raw_supply_integer.
* regcache.c (regcache::raw_supply_integer): New function.
(regcache::raw_collect_integer): Likewise.
* regcache.h: (regcache::raw_supply_integer): New declaration.
(regcache::raw_collect_integer): Likewise.
This patches moves global variable current_regcache to a class regcache
static variable (protected) so that the unit test I add in the following
patch can access it (by means of extending class regcache in unit test).
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* regcache.c (current_regcache): Change it to
regcache::current_regcache.
(regcache_observer_target_changed): Update.
(regcache_thread_ptid_changed): Make it a regcache static
method.
(regcache_thread_ptid_changed): Update.
(class regcache_access): New.
(current_regcache_test): Update.
(_initialize_regcache): Update.
* regcache.h: Include forward_list.
(regcache): Declare regcache_thread_ptid_changed and declare
registers_changed_ptid as friend.
This patch adds a unit test to current_regcache, to make sure it is
correctly updated by get_thread_arch_aspace_regcache and
registers_changed_ptid.
gdb:
2017-05-09 Yao Qi <yao.qi@linaro.org>
* regcache.c [GDB_SELF_TEST]: Include selftest.h.
(current_regcache_size): New function.
(current_regcache_test): New function.
(_initialize_regcache) [GDB_SELF_TEST]: Register the unit test.
This patch adds a tag dispatch ctor to create read-only regcache from
a write-through regcache, also this patch deletes copy ctor and
assignment operator.
gdb:
2017-04-28 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* regcache.c (regcache::regcache): New tag dispatch ctor.
(do_cooked_read): Moved above.
(regcache_dup): Use the tag dispatch ctor..
* regcache.h (regcache): Declare ctor, delete copy ctor and
assignment operator, remove friend regcache_dup.
regcache_dup, in fact, is to create a readonly regcache from a
non-readonly regcache. This patch adds an assert that src is not
readonly.
gdb:
2017-04-28 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache_dup): Assert !src->m_readonly_p and
call method save instead of regcache_cpy.
* regcache.h (struct regcache): Make regcache_dup a friend.
This patch adds ctor and dtor to regcache.
gdb:
2017-04-28 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache::regcache): New function.
(regcache::~regcache): New function.
(regcache_xmalloc_1): Remove.
(regcache_xmalloc): Call new regcache.
(regcache_xfree): Call delete regcache.
(get_thread_arch_aspace_regcache): Call new regcache.
This patch changes readonly_p type to bool.
gdb:
2017-04-25 Yao Qi <yao.qi@linaro.org>
* regcache.c (struct regcache) <readonly_p>: Change its type
to bool.
(regcache_xmalloc_1): Update parameter type and callers update.
This patches removes the 2nd argument of regcache_restore, because it
is only called by regcache_cpy. In regcache_cpy, if regcache_restore
is called, dst is not readonly, but src is readonly. So this patch
adds an assert that src is readonly in regcache_restore.
regcache_cook_read read everything from a readonly regcache cache
(src)'s register_buffer, and register status is from ->register_status.
gdb:
2017-04-21 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache_restore): Remove argument 2. Replace
argument 3 with regcache. Get register status from
src->register_status and get register contents from
register_buffer (src, regnum).
(regcache_cpy): Update.
Now that the to_fetch_registers, to_store_registers and
to_prepare_to_store target methods don't rely on the value of
inferior_ptid anymore, we can remove a bunch of now unnecessary setting
and restoring of inferior_ptid.
The asserts added recently in target_fetch_registers and
target_store_registers, which validate that inferior_ptid matches the
regcache's ptid, must go away. It's the whole point of this effort, to
not require inferior_ptid to have a particular value when calling these
functions.
One thing that I noticed is how sol-thread.c's ps_lgetregs and friends
use the current value of inferior_ptid instead of what's passed as
argument (ph->ptid), unlike proc-service.c's versions of the same
functions. Is it expected? I left it like this in the current patch,
but unless there's a good reason for it to be that way, I guess we
should make it use the parameter.
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_corefile_thread): Don't set/restore
inferior_ptid.
* proc-service.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs,
ps_lsetfpregs): Likewise.
* regcache.c (regcache_raw_update, regcache_raw_write): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs,
ps_lsetfpregs): Likewise.
* target.c (target_fetch_registers, target_store_registers):
Remove asserts.
This patch introduces the regcache_get_ptid function, which can be used
to retrieve the ptid a regcache is connected to. It is used in
subsequent patches.
gdb/ChangeLog:
* regcache.h (regcache_get_ptid): New function.
* regcache.c (regcache_get_ptid): New function.
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Yao Qi
Joel Brobecker
Tom Tromey
Pedro Alves
Simon Marchi
John Baldwin
Alan Hayward
Simon Marchi