Same line but different file ought to display file and line.
PR 21978
* objdump.c: Formatting.
(show_line): Reset prev_line when function name changes.
It's nicer than xmalloc followed by bfd_get_section_contents, since
xmalloc exits on failure and needs a check that its size_t arg doesn't
lose high bits when converted from bfd_size_type.
PR binutils/21665
* objdump.c (strtab): Make var a bfd_byte*.
(disassemble_section): Don't limit malloc size. Instead, use
bfd_malloc_and_get_section.
(read_section_stabs): Use bfd_malloc_and_get_section. Return
bfd_byte*.
(find_stabs_section): Remove now unnecessary cast.
* objcopy.c (copy_object): Use bfd_malloc_and_get_section. Free
contents on error return.
* nlmconv.c (copy_sections): Use bfd_malloc_and_get_section.
PR binutils/21665
* objdump.c (disassemble_section): Move check for an overlarge
section to just before the allocation of memory. Do not check
section size against file size, but instead use an arbitrary 2Gb
limit. Issue a warning message if the section is too big.
bfd_get_size and bfd_get_file_size should return the unsigned file
size. Otherwise they return negative values for file >= 2GB with
32-bit ufile_ptr.
bfd/
* bfd-in2.h: Regenerated.
* bfdio.c (bfd_get_size): Change return type to ufile_ptr.
(bfd_get_file_size): Likewise.
binutils/
* objdump.c (dump_relocs_in_section): Cast to ufile_ptr when
comparing against bfd_get_file_size return.
PR binutils/21665
bfd * opncls.c (get_build_id): Check that the section is beig enough
to contain the whole note.
* compress.c (bfd_get_full_section_contents): Check for and reject
a section whoes size is greater than the size of the entire file.
* elf32-v850.c (v850_elf_copy_notes): Allow for the ouput to not
contain a notes section.
binutils* objdump.c (disassemble_section): Skip any section that is bigger
than the entire file.
We can't use stat() to get archive element size. Add bfd_get_file_size
to get size for both normal files and archive elements.
bfd/
PR binutils/21519
* bfdio.c (bfd_get_file_size): New function.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/21519
* objdump.c (dump_relocs_in_section): Replace get_file_size
with bfd_get_file_size to get archive element size.
* testsuite/binutils-all/objdump.exp (test_objdump_f): New
proc.
(test_objdump_h): Likewise.
(test_objdump_t): Likewise.
(test_objdump_r): Likewise.
(test_objdump_s): Likewise.
Add objdump tests on archive.
Nowadays, opcodes/disassemble.c:disassembler selects the proper
disassembler according to ABFD only. However, it actually
selects disassemblers according to arch, mach, endianess, and
abfd. This patch adds them to the parameters of disassembler,
so that its caller can still select disassemblers in case that
abfd is NULL (a typical case in GDB).
There isn't any functionality change.
binutils:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* objdump.c (disassemble_data): Caller update.
include:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (disassembler): Update declaration.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* disassemble.c (disassembler): Add arguments a, big and mach.
Use them.
sim/common:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* sim-trace.c (trace_disasm): Caller update.
If the source file is more recent than the object file, line number
information in the object may no longer match the source. So print a
warning message.
* objdump.c (update_source_path): Add abfd param. Add struct
stat vars. Pass to try_print_file_open. Warn if source is more
recent than object.
(try_print_file_open, slurp_file): Add struct stat param to
return fstat.
(show_line): Call update_source_path with bfd.
This commit adds support to GDB so that it can modify the disassembler-options
value that is passed to the disassembler, similar to objdump's -M option.
Currently, the only supported targets are ARM, PowerPC and S/390, but
adding support for a new target(s) is not difficult.
include/
* dis-asm.h (disasm_options_t): New typedef.
(parse_arm_disassembler_option): Remove prototype.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(get_arm_regname_num_options): Likewise.
(disassemble_init_s390): New prototype.
(disassembler_options_powerpc): Likewise.
(disassembler_options_arm): Likewise.
(disassembler_options_s390): Likewise.
(remove_whitespace_and_extra_commas): Likewise.
(disassembler_options_cmp): Likewise.
(next_disassembler_option): New inline function.
(FOR_EACH_DISASSEMBLER_OPTION): New macro.
opcodes/
* disassemble.c Include "safe-ctype.h".
(disassemble_init_for_target): Handle s390 init.
(remove_whitespace_and_extra_commas): New function.
(disassembler_options_cmp): Likewise.
* arm-dis.c: Include "libiberty.h".
(NUM_ELEM): Delete.
(regnames): Use long disassembler style names.
Add force-thumb and no-force-thumb options.
(NUM_ARM_REGNAMES): Rename from this...
(NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE.
(get_arm_regname_num_options): Delete.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(parse_disassembler_options): Likewise.
(parse_arm_disassembler_option): Rename from this...
(parse_arm_disassembler_options): ...to this. Make static.
Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options.
(print_insn): Use parse_arm_disassembler_options.
(disassembler_options_arm): New function.
(print_arm_disassembler_options): Handle updated regnames.
* ppc-dis.c: Include "libiberty.h".
(ppc_opts): Add "32" and "64" entries.
(ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp.
(powerpc_init_dialect): Add break to switch statement.
Use new FOR_EACH_DISASSEMBLER_OPTION macro.
(disassembler_options_powerpc): New function.
(print_ppc_disassembler_options): Use ARRAY_SIZE.
Remove printing of "32" and "64".
* s390-dis.c: Include "libiberty.h".
(init_flag): Remove unneeded variable.
(struct s390_options_t): New structure type.
(options): New structure.
(init_disasm): Rename from this...
(disassemble_init_s390): ...to this. Add initializations for
current_arch_mask and option_use_insn_len_bits_p. Remove init_flag.
(print_insn_s390): Delete call to init_disasm.
(disassembler_options_s390): New function.
(print_s390_disassembler_options): Print using information from
struct 'options'.
* po/opcodes.pot: Regenerate.
binutils/
* objdump.c (main): Use remove_whitespace_and_extra_commas.
gdb/
* NEWS: Mention new set/show disassembler-options commands.
* doc/gdb.texinfo: Document new set/show disassembler-options commands.
* disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h".
(prospective_options): New static variable.
(gdb_disassembler::gdb_disassembler): Initialize
m_di.disassembler_options.
(gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options.
(get_disassembler_options): New function.
(set_disassembler_options): Likewise.
(set_disassembler_options_sfunc): Likewise.
(show_disassembler_options_sfunc): Likewise.
(disassembler_options_completer): Likewise.
(_initialize_disasm): Likewise.
* disasm.h (get_disassembler_options): New prototype.
(set_disassembler_options): Likewise.
* gdbarch.sh (gdbarch_disassembler_options): New variable.
(gdbarch_verify_disassembler_options): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* arm-tdep.c (num_disassembly_options): Delete.
(set_disassembly_style): Likewise.
(arm_disassembler_options): New static variable.
(set_disassembly_style_sfunc): Convert short style name into long
option name. Call set_disassembler_options.
(show_disassembly_style_sfunc): New function.
(arm_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
(_initialize_arm_tdep): Delete regnames variable and update callers.
(arm_disassembler_options): Initialize.
(disasm_options): New variable.
(num_disassembly_options): Rename from this...
(num_disassembly_styles): ...to this. Compute by scanning through
disasm_options.
(valid_disassembly_styles): Initialize using disasm_options.
Remove calls to parse_arm_disassembler_option, get_arm_regnames and
set_arm_regname_option.
Pass show_disassembly_style_sfunc to the "disassembler" setshow command.
* rs6000-tdep.c (powerpc_disassembler_options): New static variable.
(rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
* s390-tdep.c (s390_disassembler_options): New static variable.
(s390_gdbarch_init):all set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
gdb/testsuite/
* gdb.arch/powerpc-power.exp: Delete test.
* gdb.arch/powerpc-power.s: Likewise.
* gdb.disasm/disassembler-options.exp: New test.
* gdb.arch/powerpc-altivec.exp: Likewise.
* gdb.arch/powerpc-altivec.s: Likewise.
* gdb.arch/powerpc-altivec2.exp: Likewise.
* gdb.arch/powerpc-altivec2.s: Likewise.
* gdb.arch/powerpc-altivec3.exp: Likewise.
* gdb.arch/powerpc-altivec3.s: Likewise.
* gdb.arch/powerpc-power7.exp: Likewise.
* gdb.arch/powerpc-power7.s: Likewise.
* gdb.arch/powerpc-power8.exp: Likewise.
* gdb.arch/powerpc-power8.s: Likewise.
* gdb.arch/powerpc-power9.exp: Likewise.
* gdb.arch/powerpc-power9.s: Likewise.
* gdb.arch/powerpc-vsx.exp: Likewise.
* gdb.arch/powerpc-vsx.s: Likewise.
* gdb.arch/powerpc-vsx2.exp: Likewise.
* gdb.arch/powerpc-vsx2.s: Likewise.
* gdb.arch/powerpc-vsx3.exp: Likewise.
* gdb.arch/powerpc-vsx3.s: Likewise.
* gdb.arch/arm-disassembler-options.exp: Likewise.
* gdb.arch/powerpc-disassembler-options.exp: Likewise.
* gdb.arch/s390-disassembler-options.exp: Likewise.
When displaying the section headers table using objdump (-h), the column
containing the section header name is currently fixed at 13 characters.
A section name that is longer than 13 characters will overflow the
column causing the table to become miss-aligned.
In this commit I change the behaviour so that _in wide mode_ (-w -h) the
section name column is dynamically resized to fit the longest section
name we plan to display. In wide mode the column still retains a
minimum width of 13 characters.
In non-wide more the behaviour is completely unchanged.
While I was changing the dump_headers function I have unified the two
printf lines that handled the different address widths into a single
printf, the address width is now passed into printf using the '*' field
width format character.
binutils/ChangeLog:
* objdump.c (dump_section_header): Extract max section name length
from data parameter, use this when formatting output.
(find_longest_section_name): New function.
(dump_headers): Calculate longest section name when in wide mode,
reformat to unify printing of header line.
ld/ChangeLog:
* testsuite/ld-elf/eh-frame-hdr.d: Update expected results.
bfd * dwarf2.c (lookup_address_in_function_table): Return early if
there are no functions in the given comp unit, or if the high
address of the last function in the comp unit is less than the
desired address.
binutils * objdump.c (display_file): Add new parameter 'last_file'. If
last_file is true, do not call bfd_close at the end of the
function.
(main): Set the value of the last_file parameter when calling
display_file.
binutils/
PR binutils/20337
* objdump.c (compare_symbols): For ELF, sort same value/type
symbols according to size.
ld/
* testsuite/ld-powerpc/elfv2exe.d: Update.
Showing context lines is confusing in many cases, an obvious example
being loops.
* objdump.c (struct print_file_list): Add "max_printed".
(try_print_file_open): Init new field.
(show_line): Don't show 5 context lines when redisplaying source.
bfd/ChangeLog:
* elf32-arm.c ((elf32_arm_special_sections): Remove catch of noread
section using '.text.noread' pattern.
gas/ChangeLog:
* config/obj-elf.c (obj_elf_change_section) : Allow arm section with
SHF_ARM_NOREAD section flag.
* config/tc-arm.h (md_elf_section_letter) : Implement this hook to
handle letter 'y'.
(arm_elf_section_letter) : Declare it.
* config/tc-arm.c (arm_elf_section_letter): Handle letter 'y' to set
SHF_ARM_NOREAD section flag.
* doc/c-arm.texi (ARM section attribute 'y'): Document it.
gas/testsuite/ChangeLog:
* gas/arm/section-execute-only.s: New test case.
* gas/arm/section-execute-only.d: Expected output.
ld/testsuite/ChangeLog:
* ld-arm/thumb1-noread-not-present-mixing-two-section.s: Add 'y'
attribute usage.
* ld-arm/thumb1-noread-present-one-section.s: Likewise.
* ld-arm/thumb1-noread-present-two-section.s: Likewise.
* ld-arm/thumb1-input-section-flag-match.s: Likewise.
binutils/ChangeLog:
* readelf.c (get_elf_section_flags): Display y letter for section
with SHF_ARM_NOREAD section flag in readelf section output.
(process_section_headers): Add y letter in readelf section output
key mapping for ARM architecture.
include * dis-asm.h (struct disassemble_info): Add stop_vma field.
binuti * objdump.c (disassemble_bytes): Set the stop_vma field in the
disassemble_info structure when disassembling code sections with
-d.
* doc/binutils.texi (objdump): Document the discrepancy between -d
and -D.
opcodes * dis-buf.c (buffer_read_memory): Fail is stop_vma is set and the
requested region lies beyond it.
* bfin-dis.c (print_insn_bfin): Ignore sysop instructions when
looking for 32-bit insns.
* mcore-dis.c (print_insn_mcore): Disable stop_vma when reading
data.
* sh-dis.c (print_insn_sh): Likewise.
* tic6x-dis.c (print_insn_tic6x): Disable stop_vma when reading
blocks of instructions.
* vax-dis.c (print_insn_vax): Check that the requested address
does not clash with the stop_vma.
tests * gas/arm/backslash-at.s: Add extra .byte directives so that the
foo symbol does not appear to point half way through an
instruction.
* gas/arm/backslash-at.d: Update expected disassembly.
* gas/i386/ilp32/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/ilp32/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/x86-64-opcode-inval.d: Likewise.
PR binutils/18374
bin * dwarf.h (struct dwarf_section): Add reloc_info and num_relocs
fields.
(struct dwarf_section_display): Change bitfield to boolean.
(reloc_at): Add prototype.
* dwarf.c (display_loc_list): Ignore list terminators if there are
relocs against them.
(display_debug_loc): Issue a warning if there are relocs against
the .debug_loc section.
(display_displays): Initialise reloc_info and num_relocs fields.
* objdump.c (load_specific_debug_section): Initialise reloc_info
and num_relocs fields.
(reloc_at): New function.
* readelf.c (is_32bit_abs_reloc): Add IA64's R_IA64_DIS32LSB
reloc.
(reloc_at): New function.
(apply_relocations): Add relocs_return and num_relocs_return
parameters. Fill them in with the loaded relocs if non-NULL.
(dump_section_as_bytes): Update call to apply_relocations.
(load_specific_debug_section): Initialise reloc_info and
num_relocs fields.
tests * binutils-all/pr18374.s: New test file.
* binutils-all/readelf.exp: Assemble and run the new test.
* binutils-all/readelf.pr18374: Expected output from readelf.
PR binutils/17512
* coffcode.h (coff_set_arch_mach_hook): Check return value from
bfd_malloc.
(coff_slurp_line_table): Return FALSE if the line number
information was corrupt.
(coff_slurp_symbol_table): Return FALSE if the symbol information
was corrupt.
* mach-o.c (bfd_mach_o_bfd_copy_private_header_data): Always
initialise the fields of the dyld_info structure.
(bfd_mach_o_build_exec_seg_command): Replace assertion with an
error message and a return value.
(bfd_mach_o_layout_commands): Change the function to boolean.
Return FALSE if the function fails.
(bfd_mach_o_build_commands): Fail if bfd_mach_o_layout_commands
fails.
(bfd_mach_o_read_command): Fail if an unrecognised command is
encountered.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in): Set bfd_error if the
read fails.
(slurp_symtab): Check the return from bfd_malloc.
(_bfd_XX_bfd_copy_private_bfd_data_common): Fail if the copy
encountered an error.
(_bfd_XXi_final_link_postscript): Fail if a section could not be
copied.
* peicode.h (pe_bfd_object_p): Fail if the header could not be
swapped in.
* tekhex.c (first_phase): Fail if the section is too big.
* versados.c (struct esdid): Add content_size field.
(process_otr): Use and check the new field.
(versados_get_section_contents): Check that the section exists and
that the requested data is available.
PR binutils/17512
* addr2line.c (main): Call bfd_set_error_program_name.
* ar.c (main): Likewise.
* coffdump.c (main): Likewise.
* cxxfilt.c (main): Likewise.
* dlltool.c (main): Likewise.
* nlmconv.c (main): Likewise.
* nm.c (main): Likewise.
* objdump.c (main): Likewise.
* size.c (main): Likewise.
* srconv.c (main): Likewise.
* strings.c (main): Likewise.
* sysdump.c (main): Likewise.
* windmc.c (main): Likewise.
* windres.c (main): Likewise.
* objcopy.c (main): Likewise.
(copy_relocations_in_section): Check for relocs without associated
symbol pointers.
PR binutils/17512
* objdump.c (display_any_bfd): Add a depth limit to nested archive
display in order to avoid infinite loops.
* srconv.c: Replace calls to abort with calls to fatal with an
error message.
PR binutils/17512
* objdump.c (display_any_bfd): Avoid infinite loop closing and
opening the same archive again and again.
* archive64.c (bfd_elf64_archive_slurp_armap): Add range checks.
* libbfd.c (safe_read_leb128): New function.
* libbfd-in.h (safe_read_leb128): Add prototype.
* libbfd.h: Regenerate.
* elf-attrs.c (_bfd_elf_parse_attributes): Use safe_read_leb128.
Check for an over-long subsection length.
* elf.c (elf_parse_notes): Check that the namedata is long enough
for the string comparison that is about to be performed.
(elf_read_notes): Zero-terminate the note buffer.
PR binutils/17512
* objdump.c (free_debug_section): Reset the compress_status as
well.
* compress.c (bfd_get_full_section_contents): Fail if there are no
section contents available when the compress_status is
COMPRESS_SECTION_DONE.
* libbfd.c (bfd_malloc): Refuse to allocate a negative size.
(bfd_malloc2): Use bfd_malloc.
(bfd_realloc): Refuse to reallocate a negative size.
(bfd_realloc2): Use bfd_realloc.
(bfd_realloc_or_free): Use bfd_realloc.
(bfd_zmalloc): Use bfd_malloc.
(bfd_zmalloc): Use bfd_malloc2.
* opncls.c (bfd_alloc): Refuse to allocate a negative size.
PR binutils/17512
* dwarf.h (struct dwarf_section): Add user_data field.
* dwarf.c (frame_need_space): Check for an over large register
number.
(display_debug_frames): Check the return value from
frame_need_space. Check for a CFA expression that is so long the
start address wraps around.
(debug_displays): Initialise the user_data field.
* objdump.c (load_specific_debug_section): Save the BFD section
pointer in the user_data field of the dwarf_section structure.
(free_debug_section): Update BFD section data when freeing section
contents.
* readelf.c (load_specific_debug_section): Initialise the
user_data field.
* archive.c (do_slurp_coff_armap): Add range checks to prevent
running off the end of the string table.
* compress.c (bfd_get_full_section_contents): Return a NULL
pointer for zero sized sections. Do not attempt to copy a buffer
onto itself.
* elf-attrs.c (_bfd_elf_parse_attributes): Check for an empty
header. Add range checks to avoid running off the end of the
section.
* elf.c (bfd_elf_get_str_section): Seek before allocating so that
if the seek fails, no memory is allocated.
(bfd_elf_string_from_elf_section): Do not allocate a string from a
non string section. It only leads to trouble later on.
(_bfd_elf_print_private_bfd_data): Check for there being too
little external dynamic data.
(bfd_section_from_shdr): Replace assertion with a failure mode.
(bfd_section_from_shdr): When walking a loaded group section use
the internal structure size, not the external size. Check for the
group section being empty.
* elf32-i386.c (elf_i386_rtype_to_howto): Replace assertion with a
failure mode.
* elfcode.h (elf_slurp_reloc_table): Likewise.
* reloc.c (bfd_perform_relocation): Avoid seg-fault if the howto
parameter is NULL.
Both readelf/objdump know how to get symbol version string for dynamic
symbols. This patch extracts this functionality into a separate
function and uses it to add symbol version string to versioned symbol
names when dumping dynamic relocations.
bfd/
PR binutils/16496
* elf-bfd.h (bfd_elf_get_symbol_version_string): New.
* elf.c (bfd_elf_get_symbol_version_string): New. Extracted
from bfd_elf_print_symbol.
(bfd_elf_print_symbol): Use it.
binutils/
PR binutils/16496
* objdump.c (objdump_print_symname): Call
bfd_elf_get_symbol_version_string to get ELF symbol version
string. Append version string if needed.
* readelf.c (versioned_symbol_info): New enum.
(get_symbol_version_string): New. Extracted from
process_symbol_table.
(dump_relocations): Add a new argument to indicate if dynamic
symbol table is used. Use get_symbol_version_string to get
symbol version string for dynamic symbol. Append version string
if needed.
(process_relocs): Updated dump_relocations call.
(process_symbol_table): Use get_symbol_version_string.
ld/testsuite/
PR binutils/16496
* ld-cris/weakref3.d: Add symbol version string to versioned
symbol names in dynamic relocation.
* ld-cris/weakref4.d: Likewise.
* ld-elfvers/vers24.rd: Likewise.
* ld-elf/pr16496a.c: New file.
* ld-elf/pr16496a.map: Likewise.
* ld-elf/pr16496b.c: Likewise.
* ld-elf/pr16496b.od: Likewise.
* ld-elf/shared.exp (build_tests): Add libpr16496a.so and
libpr16496b.so tests.
PR binutils/17512
* dwarf.c (read_and_display_attr_value): Check that we do not read
past end.
(display_debug_pubnames_worker): Add range checks.
(process_debug_info): Check for invalid pointer sizes.
(display_loc_list): Likewise.
(display_loc_list_dwo): Likewise.
(display_debug_ranges): Likewise.
(display_debug_aranges): Check for invalid address size.
(read_cie): Add range checks. Replace call strchr with while loop.
* objdump.c (dump_dwarf): Replace abort with a warning message.
(print_section_stabs): Improve range checks.
* rdcoff.c (coff_get_slot): Use long for indx parameter type.
Add check for an excesively large index.
* rddbg.c (read_section_stabs_debugging_info): Zero terminate the
string table. Avoid walking off the end of the stabs data.
* stabs.c (parse_stab_string): Add check for a NULL name.
PR binutils/17512
* coffcode.h (coff_slurp_line_table): Set the line number of
corrupt entries to -1.
(coff_slurp_symbol_table): Alway initialise the value of the
symbol.
* coffgen.c (coff_print_symbol): Check that the combined pointer
is valid.
(coff_print_symbol): Do not print negative line numbers.
* peXXigen.c (pe_print_idata): Add range checking displaying
member names.
PR binutils/17512
* objdump.c (slurp_symtab): Fail gracefully if the table could not
be read.
(dump_relocs_in_section): Likewise.
* aoutx.h (slurp_symbol_table): Check that computed table size is
not bigger than the file from which is it being read.
(slurp_reloc_table): Likewise.
* coffcode.h (coff_slurp_line_table): Remove unneeded local
'warned'. Do not try to print the details of a symbol with an
invalid index.
* coffgen.c (make_a_sectiobn_from_file): Check computed string
index against length of string table.
(bfd_coff_internal_syment_name): Check read in string offset
against length of string table.
(build_debug_section): Return a pointer to the section used.
(_bfd_coff_read_string_table): Store the length of the string
table in the coff_tdata structure.
(bfd_coff_free_symbols): Set the length of the string table to
zero when it is freed.
(coff_get_normalized_symtab): Check offsets against string table
or data table lengths as appropriate.
* cofflink.c (_bfd_coff_link_input_bfd): Check offset against
length of string table.
* compress.c (bfd_get_full_section_contents): Check computed size
against the size of the file.
* libcoff-in.h (obj_coff_strings_len): Define.
(struct coff_tdata): Add strings_len field.
* libcoff.h: Regenerate.
* peXXigen.c (pe_print_debugdata): Do not attempt to print the
data if the debug section is too small.
* xcofflink.c (xcoff_link_input_bfd): Check offset against
length of string table.
for better packing. Removes a field and a flag that are never set.
bfd/
* bfd.c (struct bfd): Reorganise for better packing. Delete
"ifd" field. Make "format", "direction" and "flags" bitfields.
(HAS_LOAD_PAGE): Delete, renumber following flags.
* bfd-in2.h: Regenerate.
* coff-tic4x.c: Remove HAS_LOAD_PAGE from extra flags in target vecs.
binutils/
* objdump.c (dump_bfd_header): Don't print HAS_LOAD_PAGE.
This patche fixes the values of FDE pc in output of objdump -Wf. They now
match readelf ones.
binutils/
* objdump.c (load_specific_debug_section): Set address of section.
bfd/
* archures.c (bfd_mach_i386_nacl): Fix definition so it doesn't
collide with bfd_mach_l1om.
* bfd-in2.h: Regenerate.
* elf32-i386.c (elf32_i386_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf32-i386-nacl definition.
* elf64-x86-64.c (elf64_x86_64_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf64-x86-64-nacl definition.
(elf32_x86_64_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf32-x86-64-nacl definition.
binutils/
* objdump.c (dump_dwarf): Grok bfd_mach_x86_64_nacl and
bfd_mach_x64_32_nacl as equivalent to bfd_mach_x86_64.
ld/testsuite/
* ld-x86-64/x86-64.exp (mixed1, mixed2): Loosen error string match
so it accepts "i386:nacl" in place of "i386".
* ld-x86-64/ilp32-2.d: Likewise.
* ld-x86-64/ilp32-3.d: Likewise.
* ld-x86-64/lp64-2.d: Likewise.
* ld-x86-64/lp64-3.d: Likewise.
