C++ requires inline functions to be declared inline and defined in
every translation unit that uses them. frange_nextafter is used in
gimple-range-op.cc but it's only defined as inline in
range-op-float.cc. Drop the extraneous inline specifier.
Other non-static inline functions in range-op-float.cc are not
referenced elsewhere, so I'm making them static.
for gcc/ChangeLog
* range-op-float.cc (frange_nextafter): Drop inline.
(frelop_early_resolve): Add static.
(frange_float): Likewise.
(cherry picked from commit d438b67e005bf8fc9e4af26410bf69816c30e969)
The following fixes code GENERIC generation for (convert! ...)
which currently generates
if (TREE_TYPE (_o1[0]) != type)
_r1 = fold_build1_loc (loc, NOP_EXPR, type, _o1[0]);
if (EXPR_P (_r1))
goto next_after_fail867;
else
_r1 = _o1[0];
where obviously braces are missing.
PR middle-end/110200
* genmatch.cc (expr::gen_transform): Put braces around
the if arm for the (convert ...) short-cut.
(cherry picked from commit 820d1aec89c43dbbc70d3d0b888201878388454c)
This patch fixes a wrong-code bug in the wake of PR92729, the transition that
turned the AVR backend from cc0 to CCmode. In cc0, the insn that uses cc0 like
a conditional branch always follows the cc0 setter, which is no more the case
with CCmode where set and use of REG_CC might be in different basic blocks.
This patch removes the machine-dependent reorg pass in avr_reorg entirely.
It is replaced by a new, AVR specific mini-pass that runs prior to split2.
Canonicalization of comparisons away from the "difficult" codes GT[U] and LE[U]
is now mostly performed by implementing TARGET_CANONICALIZE_COMPARISON.
Moreover:
* Text peephole conditions get "dead_or_set_regno_p (*, REG_CC)" as needed.
* RTL peephole conditions get "peep2_regno_dead_p (*, REG_CC)" as needed.
* Conditional branches no more clobber REG_CC.
* insn output for compares looks ahead to determine the branch mode in use.
This needs also "dead_or_set_regno_p (*, REG_CC)".
* Add RTL peepholes for decrement-and-branch detection.
* Some of the patterns like "*cmphi.zero-extend.0" lost their
combine-ational part wit PR92729. Restore them.
Finally, it fixes some of the many indentation glitches left over from PR92729.
gcc/
PR target/109650
PR target/92729
Backport from 2023-05-10 master r14-1688.
* config/avr/avr-passes.def (avr_pass_ifelse): Insert new pass.
* config/avr/avr.cc (avr_pass_ifelse): New RTL pass.
(avr_pass_data_ifelse): New pass_data for it.
(make_avr_pass_ifelse, avr_redundant_compare, avr_cbranch_cost)
(avr_canonicalize_comparison, avr_out_plus_set_ZN)
(avr_out_cmp_ext): New functions.
(compare_condtition): Make sure REG_CC dies in the branch insn.
(avr_rtx_costs_1): Add computation of cbranch costs.
(avr_adjust_insn_length) [ADJUST_LEN_ADD_SET_ZN, ADJUST_LEN_CMP_ZEXT]:
[ADJUST_LEN_CMP_SEXT]Handle them.
(TARGET_CANONICALIZE_COMPARISON): New define.
(avr_simplify_comparison_p, compare_diff_p, avr_compare_pattern)
(avr_reorg_remove_redundant_compare, avr_reorg): Remove functions.
(TARGET_MACHINE_DEPENDENT_REORG): Remove define.
* config/avr/avr-protos.h (avr_simplify_comparison_p): Remove proto.
(make_avr_pass_ifelse, avr_out_plus_set_ZN, cc_reg_rtx)
(avr_out_cmp_zext): New Protos
* config/avr/avr.md (branch, difficult_branch): Don't split insns.
(*cbranchhi.zero-extend.0", *cbranchhi.zero-extend.1")
(*swapped_tst<mode>, *add.for.eqne.<mode>): New insns.
(*cbranch<mode>4): Rename to cbranch<mode>4_insn.
(define_peephole): Add dead_or_set_regno_p(insn,REG_CC) as needed.
(define_deephole2): Add peep2_regno_dead_p(*,REG_CC) as needed.
Add new RTL peepholes for decrement-and-branch and *swapped_tst<mode>.
Rework signtest-and-branch peepholes for *sbrx_branch<mode>.
(adjust_len) [add_set_ZN, cmp_zext]: New.
(QIPSI): New mode iterator.
(ALLs1, ALLs2, ALLs4, ALLs234): New mode iterators.
(gelt): New code iterator.
(gelt_eqne): New code attribute.
(rvbranch, *rvbranch, difficult_rvbranch, *difficult_rvbranch)
(branch_unspec, *negated_tst<mode>, *reversed_tst<mode>)
(*cmpqi_sign_extend): Remove insns.
(define_c_enum "unspec") [UNSPEC_IDENTITY]: Remove.
* config/avr/avr-dimode.md (cbranch<mode>4): Canonicalize comparisons.
* config/avr/predicates.md (scratch_or_d_register_operand): New.
* config/avr/constraints.md (Yxx): New constraint.
gcc/testsuite/
PR target/109650
Backport from 2023-05-10 master r14-1688.
* gcc.target/avr/torture/pr109650-1.c: New test.
* gcc.target/avr/torture/pr109650-2.c: New test.
So for the attached testcase, we assumed that zero_one_valued_p would
be the value [0,1] but currently zero_one_valued_p matches also
signed 1 bit integers.
This changes that not to match that and fixes the 2 new testcases at
all optimization levels.
OK for GCC 13? Bootstrapped and tested on x86_64-linux-gnu with no regressions.
PR tree-optimization/110165
PR tree-optimization/110166
gcc/ChangeLog:
* match.pd (zero_one_valued_p): Don't accept
signed 1-bit integers.
gcc/testsuite/ChangeLog:
* gcc.c-torture/execute/pr110165-1.c: New test.
* gcc.c-torture/execute/pr110166-1.c: New test.
(cherry picked from commit 72e652f3425079259faa4edefe1dc571f72f91e0)
When folding two conversions in a row we use TYPE_PRECISION but
that's invalid for VECTOR_TYPE. The following fixes this by
using element_precision instead.
middle-end/110182
* match.pd (two conversions in a row): Use element_precision
to DTRT for VECTOR_TYPE.
(cherry picked from commit 3e12669a0eb968cfcbe9242b382fd8020935edf8)
This bug was essentially that darwin_rs6000_special_round_type_align()
was ignoring externally-imposed capping of field alignment.
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
PR target/110044
gcc/ChangeLog:
* config/rs6000/rs6000.cc (darwin_rs6000_special_round_type_align):
Make sure that we do not have a cap on field alignment before altering
the struct layout based on the type alignment of the first entry.
gcc/testsuite/ChangeLog:
* gcc.target/powerpc/darwin-abi-13-0.c: New test.
* gcc.target/powerpc/darwin-abi-13-1.c: New test.
* gcc.target/powerpc/darwin-abi-13-2.c: New test.
* gcc.target/powerpc/darwin-structs-0.h: New test.
(cherry picked from commit 84d080a29a780973bef47171ba708ae2f7b4ee47)
The pr96024.f90 testcase ICEs on big-endian hosts. The problem is
that length->val.integer is accessed after checking
length->expr_type == EXPR_CONSTANT, but it is a CHARACTER constant
which uses length->val.character union member instead and on big-endian
we end up reading constant 0x100000000 rather than some small number
on little-endian and if target doesn't have enough memory for 4 times
that (i.e. 16GB allocation), it ICEs.
2023-06-09 Jakub Jelinek <jakub@redhat.com>
PR fortran/96024
* primary.cc (gfc_convert_to_structure_constructor): Only do
constant string ctor length verification and truncation/padding
if constant length has INTEGER type.
(cherry picked from commit 4cf6e322adc19f927859e0a5edfa93cec4b8c844)
Since mask < 0 will be always false for vector char when
-funsigned-char, but vpblendvb needs to check the most significant
bit. The patch explicitly VCE to vector signed char.
gcc/ChangeLog:
PR target/110108
* config/i386/i386.cc (ix86_gimple_fold_builtin): Explicitly
view_convert_expr mask to signed type when folding pblendvb
builtins.
gcc/testsuite/ChangeLog:
* gcc.target/i386/pr110108-2.c: New test.
As the PR says we shouldn't be using qualifier_unsigned for the return type of the __ssat intrinsics.
UNSIGNED_SAT_BINOP_UNSIGNED_IMM_QUALIFIERS already exists for that.
This was just a thinko.
This patch fixes this and the warning with -Wconversion goes away.
Bootstrapped and tested on arm-none-linux-gnueabihf.
gcc/ChangeLog:
PR target/109939
* config/arm/arm-builtins.cc (SAT_BINOP_UNSIGNED_IMM_QUALIFIERS): Use
qualifier_none for the return operand.
gcc/testsuite/ChangeLog:
PR target/109939
* gcc.target/arm/pr109939.c: New test.
(cherry picked from commit 95542a6ec4b350c653b793b7c36a8210b0e9a89d)
PR106907 has few warnings spotted from cppcheck. In that addressing duplicate
expression issue here. Here the same expression is used twice in logical
AND(&&) operation which result in same result so removing that.
2023-06-06 Jeevitha Palanisamy <jeevitha@linux.ibm.com>
gcc/
PR target/106907
* config/rs6000/rs6000.cc (vec_const_128bit_to_bytes): Remove
duplicate expression.
(cherry picked from commit c4deccd44655c5d748dfed200a37f2b678c32fe8)
In r11-966-g9a182ef9ee011935d827ab5c6c9a7cd8e22257d8 we introduce a
simplification to emit_move_insn that attempts to simplify moves of the form:
(set (subreg:M1 (reg:M2 ...)) (constant C))
where M1 and M2 are of equal mode size. That is problematic for the splitter
vfp.md:no_literal_pool_df_immediate in the arm backend, which tries to pun an
lvalue DFmode pseudo into DImode and assign a constant to it with
emit_move_insn, as the new transformation simply undoes this, and we end up
splitting indefinitely.
This patch changes things around in the arm backend so that we use a
DImode temporary (instead of DFmode) and first load the DImode constant
into the pseudo, and then pun the pseudo into DFmode as an rvalue in a
reg -> reg move. I believe this should be semantically equivalent but
avoids the pathalogical behaviour seen in the PR.
gcc/ChangeLog:
PR target/109800
* config/arm/arm.md (movdf): Generate temporary pseudo in DImode
instead of DFmode.
* config/arm/vfp.md (no_literal_pool_df_immediate): Rather than punning an
lvalue DFmode pseudo into DImode, use a DImode pseudo and pun it into
DFmode as an rvalue.
gcc/testsuite/ChangeLog:
PR target/109800
* gcc.target/arm/pure-code/pr109800.c: New test.
(cherry picked from commit f5298d9969b4fa34ff3aecd54b9630e22b2984a5)
The monadic operations in std::expected always check has_value() so we
can avoid the execptional path in value() and the assertions in error()
by accessing _M_val and _M_unex directly. This means that the monadic
operations no longer require _M_unex to be copyable so that it can be
thrown from value(), as modified by LWG 3938.
This also fixes two incorrect uses of std::move in transform(F&&)& and
transform(F&&) const& which I found while making these changes.
Now that move-only error types are supported, it's possible to properly
test the constraints that LWG 3877 added to and_then and transform. The
lwg3877.cc test now does that.
libstdc++-v3/ChangeLog:
* include/std/expected (expected::and_then, expected::or_else)
(expected::transform_error): Use _M_val and _M_unex instead of
calling value() and error(), as per LWG 3938.
(expected::transform): Likewise. Remove incorrect std::move
calls from lvalue overloads.
(expected<void, E>::and_then, expected<void, E>::or_else)
(expected<void, E>::transform): Use _M_unex instead of calling
error().
* testsuite/20_util/expected/lwg3877.cc: Add checks for and_then
and transform, and for std::expected<void, E>.
* testsuite/20_util/expected/lwg3938.cc: New test.
(cherry picked from commit fe94f8b7e022b7e154f6c47cc292d4463bddac5e)
This was approved in Issaquah 2023. As well as fixing the value
categories, this fixes the fact that we were incorrectly testing E
instead of T in the or_else constraints.
libstdc++-v3/ChangeLog:
* include/std/expected (expected::and_then, expected::or_else)
(expected::transform, expected::transform_error): Fix exception
specifications as per LWG 3877.
(expected<void, E>::and_then, expected<void, E>::transform):
Likewise.
* testsuite/20_util/expected/lwg3877.cc: New test.
(cherry picked from commit ba490492e51834db645a3165d14f2ba0af62a8c7)
On sh target, there is a MULTILIB_DIRNAMES (or is it MULTILIB_OPTIONS) named m2,
this conflicts with the langauge m2. So when you do a `make clean`, it will remove
the m2 directory and then a build will fail. Now since r0-78222-gfa9585134f6f58,
the multilib directories are no longer created in the gcc directory as libgcc
was moved to the toplevel. So we can remove the part of clean that removes those
directories.
Tested on x86_64-linux-gnu and a cross to sh-elf that `make clean` followed by
`make` works again.
Committed as approved.
gcc/ChangeLog:
PR bootstrap/110085
* Makefile.in (clean): Remove the removing of
MULTILIB_DIR/MULTILIB_OPTIONS directories.
(cherry picked from commit afd87299cefd021daf0158d5b6276c37013996b9)
The size reported by stat is always zero for some special files such as
those under /proc, which means the current copy_file implementation
thinks there is nothing to copy. Instead of trusting the stat value, try
to read a character from a streambuf and check for EOF.
For the backport, we also need to avoid trying to use sendfile when stat
reports a zero size, so that we use streambufs to copy the file.
libstdc++-v3/ChangeLog:
PR libstdc++/108178
* src/filesystem/ops-common.h (do_copy_file): Check for empty
files by trying to read a character.
* testsuite/27_io/filesystem/operations/copy_file_108178.cc:
New test.
(cherry picked from commit 07a0e108247f23fcb919c61595adae143f1ea02a)
libstdc++-v3/ChangeLog:
* src/filesystem/ops-common.h (do_copy_file) [O_CLOEXEC]: Set
close-on-exec flag on file descriptors.
(cherry picked from commit 7e8e071c4b64f1b6ea5ddf528724fc793a0f0e36)
For 32-bit targets using -pedantic (or using Clang) makes the expression
_M_elems[0] ambiguous. The overloaded operator[] that we want to call
has a size_t parameter, but 0 is type ptrdiff_t for many ILP32 targets,
so using the implicit conversion from _M_elems to T* and then
subscripting that is also viable.
Change the 0 to (size_type)0 and also make the conversion to T*
explicit, so that's it's not viable here. The latter change requires a
static_cast in data() where we really do want to convert _M_elems to a
pointer.
libstdc++-v3/ChangeLog:
PR libstdc++/110139
* include/std/array (__array_traits<T, 0>::operator T*()): Make
conversion operator explicit.
(array::front): Use size_type as subscript operand.
(array::data): Use static_cast to make conversion explicit.
* testsuite/23_containers/array/element_access/110139.cc: New
test.
(cherry picked from commit 56001fad4ecc32396beead6644906e3846244b67)
It is not required that codecvt<char8_t, char, mbstate_t> facet be
supported by the locale, nor is it added as part of the default locale.
This can lead to dangerous behaviour when static_cast.
libstdc++-v3/ChangeLog:
* include/bits/locale_classes.tcc: Remove check for
codecvt<char8_t, char, mbstate_t> facet.
(cherry picked from commit 3d9b3ddb5fc9087c17645d53e6bcb1881e1955a4)
All special enums have declarations in the D runtime library, but the
compiler will recognize and treat them specially if declared in any
module. When the underlying base type of a special enum is a different
size to its matched intrinsic, then this can cause undefined behavior at
runtime. Detect and warn about when such a mismatch occurs.
gcc/d/ChangeLog:
* gdc.texi (Warnings): Document -Wextra and -Wmismatched-special-enum.
* implement-d.texi (Special Enums): Add reference to warning option
-Wmismatched-special-enum.
* lang.opt: Add -Wextra and -Wmismatched-special-enum.
* types.cc (TypeVisitor::visit (TypeEnum *)): Warn when declared
special enum size mismatches its intrinsic type.
gcc/testsuite/ChangeLog:
* gdc.dg/Wmismatched_enum.d: New test.
(cherry picked from commit 3ad9313a2e28287aa350d9dc3ea7746d8302662d)
The radix sort uses two buffers, a1 for input and a2 for output.
After every digit the role of the two buffers is swapped.
When terminating the sort early the code made sure the output
was in a2. However, when we run out of bits, as can happen on
32bit platforms, the sorted result was in a1, as we had just
swapped a1 and a2.
This patch fixes the problem by unconditionally having a1 as
output after every loop iteration.
This bug manifested itself only on 32bit platforms and even then
only in some circumstances, as it needs frames where a swap
is required due to differences in the top-most byte, which is
affected by ASLR. The new logic was validated by exhaustive
search over 32bit input values.
libgcc/ChangeLog:
PR libgcc/109670
* unwind-dw2-fde.c: Fix radix sort buffer management.
The atomic fastpath bypasses the code that releases the sort
array which was lazily allocated during unwinding. We now
check after deregistering if there is an array to free.
libgcc/ChangeLog:
PR libgcc/109685
* unwind-dw2-fde.c: Free sort array in atomic fast path.
After reload, there may be sequences like
lreg = dreg
lreg = lreg <op> const
with an LD_REGS dreg, non-LD_REGS lreg, and <op> in PLUS, IOR, AND.
If dreg dies after the first insn, it is possible to use
dreg = dreg <op> const
lreg = dreg
instead which is more efficient.
gcc/
PR target/110088
* config/avr/avr.md: Add an RTL peephole to optimize operations on
non-LD_REGS after a move from LD_REGS.
(piaop): New code iterator.
The current implementation of this non-standard overload of std::abs
incorrectly returns a negative value for negative NaNs and negative
zero, because x < 0 is false in both cases.
Use fabsl(long double) or fabsf128(_Float128) if those do the right
thing. Otherwise, use __builtin_signbit(x) instead of x < 0 to detect
negative inputs. This assumes that __builtin_signbit handles __float128
correctly, but that seems to be true for all of GCC, clang and icc.
libstdc++-v3/ChangeLog:
PR libstdc++/109758
* include/bits/std_abs.h (abs(__float128)): Handle negative NaN
and negative zero correctly.
* testsuite/26_numerics/headers/cmath/109758.cc: New test.
(cherry picked from commit af595613acbd9863198ae69c7b1c9e856bca9e4f)
This should have been done in r9-2028-g8ba7f29e3dd064 when
std::shared_mutex was changed to be defined without depending on
_GLIBCXX_USE_C99_STDINT_TR1.
libstdc++-v3/ChangeLog:
* testsuite/experimental/feat-cxx14.cc: Remove dependency on
_GLIBCXX_USE_C99_STDINT_TR1.
(cherry picked from commit 2c04284abe5d5f1148c709a769f3b83bee2485d0)
These #ifdef checks should have been removed in r9-2029-g612c9c702e2c9e
when the u16string_view and u32string_view aliases were changed to be
defined unconditionally.
libstdc++-v3/ChangeLog:
* testsuite/21_strings/basic_string_view/typedefs.cc: Remove
dependency on _GLIBCXX_USE_C99_STDINT_TR1.
* testsuite/experimental/string_view/typedefs.cc: Likewise.
(cherry picked from commit fe0e3df6f3751a0164c8e92a0d6519f2e10527a8)
This test fails in C++20 and later due to a warning:
warning: C++20 says that these are ambiguous, even though the second is reversed:
note: candidate 1: 'bool MyClass::operator==(const MyClass&)'
note: candidate 2: 'bool MyClass::operator==(const MyClass&)' (reversed)
note: try making the operator a 'const' member function
FAIL: 26_numerics/pstl/numeric_ops/transform_reduce.cc (test for excess errors)
libstdc++-v3/ChangeLog:
* testsuite/26_numerics/pstl/numeric_ops/transform_reduce.cc:
Add const to equality operator.
(cherry picked from commit f8403c43045cd56b5f775e1cf12a3f22feca4b58)
Traditionally libstdc++ allowed containers to be
instantiated with allocator's that have the wrong value type, implicitly
rebinding the allocator to the container's value type. Since C++20 that
has been explicitly ill-formed, so the extension is no longer supported
in strict modes (e.g. -std=c++17) and in C++20 and later.
libstdc++-v3/ChangeLog:
* doc/xml/manual/evolution.xml: Document removal of implicit
allocator rebinding extensions in strict mode and for C++20.
* doc/html/*: Regenerate.
(cherry picked from commit 8cbaf679a3c1875c5475bd1cb0fb86fb9d03b2d4)
We should not test for nan by passing it a null pointer, as this can
trigger -Wnonnull warnings.
Also fix an outdated comment about the default -std mode.
libstdc++-v3/ChangeLog:
* acinclude.m4 (GLIBCXX_CHECK_C99_TR1): Use a non-null pointer
to check for nan, nanf, and nanl.
* configure: Regenerate.
(cherry picked from commit 6190a74ebee69415b501996821c92f60d892fb81)
libstdc++-v3/ChangeLog:
* testsuite/libstdc++-prettyprinters/chrono.cc: Only test
printer for chrono::zoned_time for cx11 ABI and tzdb effective
target.
(cherry picked from commit 151bad410218d266e16b90da0147d57f9d661c1a)
This fixes a couple of errors in the printers for chrono types, and adds
tests to ensure they keep working.
libstdc++-v3/ChangeLog:
* python/libstdcxx/v6/printers.py (StdChronoDurationPrinter):
Print floating-point durations correctly.
(StdChronoTimePointPrinter): Support printing only the value,
not the type name. Uncomment handling for known clocks.
(StdChronoZonedTimePrinter): Remove type names from output.
(StdChronoCalendarPrinter): Fix hh_mm_ss member access.
(StdChronoTimeZonePrinter): Add equals sign to output.
* testsuite/libstdc++-prettyprinters/chrono.cc: New test.
(cherry picked from commit 7bd251ca751317385f7e2e4e031736a99f376012)
This option does not imply -march=i386 so it's incorrect to say it
generates code that will run on "any i386 system".
gcc/ChangeLog:
PR target/109954
* doc/invoke.texi (x86 Options): Fix description of -m32 option.
(cherry picked from commit eeb92704967875411416b0b9508aa6f49e8192fd)
When long double is wider than double, but from_chars is implemented
in terms of double, tests that involve the full precision of long
double are expected to fail. Mark them as such on x86_64-*-vxworks*.
for libstdc++-v3/ChangeLog
* testsuite/20_util/from_chars/4.cc: Skip long double test06
on x86_64-vxworks.
* testsuite/20_util/to_chars/long_double.cc: Xfail run on
x86_64-vxworks.
(cherry picked from commit 282e4e745981c5c6e3edaae315e1f499a45402df)
Glibc defines int32_t as 'int' while newlib defines it as 'long int'.
Although these correspond to the same size, g++ complains when using the
'wrong' version:
invalid conversion from 'long int*' to 'int32_t*' {aka 'int*'} [-fpermissive]
or
invalid conversion from 'int*' to 'int32_t*' {aka 'long int*'} [-fpermissive]
when calling vst1q(int32*, int32x4_t) with a first parameter of type
'long int *' (resp. 'int *')
To make this test pass with any type of toolchain, this patch defines
'word_type' according to which libc is in use.
2023-05-23 Christophe Lyon <christophe.lyon@linaro.org>
gcc/testsuite/
* gcc.target/arm/mve/intrinsics/mve_intrinsic_type_overloads-int.c:
Support both definitions of int32_t.
(cherry picked from commit d12d2aa4fccc76a9a08c8120c5e37d9cab8683e8)
Signed-off-by: Matthias Kretz <m.kretz@gsi.de>
libstdc++-v3/ChangeLog:
PR libstdc++/109822
* include/experimental/bits/simd.h (to_native): Use int NTTP
as specified in PTS2.
(to_compatible): Likewise. Add missing tag to call mask
generator ctor.
* testsuite/experimental/simd/pr109822_cast_functions.cc: New
test.
(cherry picked from commit 668d43502f465d48adbc1fe2956b979f36657e5f)
This avoids a failure on PR109964.
Signed-off-by: Matthias Kretz <m.kretz@gsi.de>
libstdc++-v3/ChangeLog:
* testsuite/experimental/simd/tests/integer_operators.cc:
Compute expected value differently to avoid getting turned into
a vector shift.
(cherry picked from commit 3e2689e568425f14d6728504ad6f5d32b90320ad)
Alexandre Oliva
GCC Administrator
Richard Biener
Georg-Johann Lay
Andrew Pinski
Iain Sandoe
Jakub Jelinek
liuhongt
Kyrylo Tkachov
Jeevitha Palanisamy
Alex Coplan
Jonathan Wakely
Joseph Faulls
Iain Buclaw
Steve Kargl
Thomas Neumann
Christophe Lyon
Matthias Kretz